Top Plastic Patch Embellishment

LIFEGUARD Official Unisex Baseball Hat Red

  • Style: classic snapback baseball cap trucker hat.
  • Trim/Embellishment: embroidered '1965 LUCKY THUNDER DRINK HOWEL'S patch logo on front/ 'DRINK HOWEL's distinctive embroidery text at the back of cap/ GREAT COLOR CONTRAST for a casual modern look.
  • Crown: round with mesh back (GOOD FOR VENTILATION) and top button.
  • Brim: DISTRESSED CURVE deisgn for a vintage chic look.
  • Medium and XL sizes available: Medium size inner band: approx. 22.8'/ 58cm, Medium size brim width: approx. 2.95'/ 7.5cm, XL size inner band: approx. 23.6'/ 60cm, XL size brim width: approx. 2.95'/ 7.5cm.
Check Stock

3 PCS Red Lips Tongue Patches Iron on Patches Embroidered Motif Applique Glitter Sequin Decoration Patches DIY Sew on Patch for Jeans Clothing Tattoo Biker Punk Embroidered Applique Sequins Badge

  • Appliques and embroidered patches can be ironed or sewn in the favorite bags, cushions, curtains, bed sheets, tablecloths, scarves, underwear and other cloth products, can cover flaws, but also embellishment decoration..
  • Package: 3 pcs red lips patches include a big patch, a small patches and a medium patches..
  • Size: The big patch is 10cm x 9.4cm/3.9inch x 3.7inch, the medium patches is 7.6cm x 6cm/ 3inch x 2.3inch , the small patches is 6.5cm x 5.2cm/ 2.5inch x 2 inch.
Check Stock

ililily Maui Embroidery Patch Casual Mesh Baseball Cap Distressed Trucker Hat Blue Green

  • Style: classic 5 panel mesh hat baseball cap with snapback closure.
  • Trim/Embellishment: MAUI and save the ocean embroidery colorful patch on front. simple, versatile and classic cap. suitable for both daily look and....
  • Crown: cotton round with foam at front of crown to ensure comfort. mesh back for ventilation. round top button. inner of cap is lined with sweatband....
  • Brim: pre-curved casual trucker hat. distressed detail and stitched on brim.
  • Inner band: approx. 58 cm (7 1/4) / brim width: approx. 8 cm (3").
Check Stock

ililily NASA Meatball Logo Embroidery Baseball Cap Apollo 1 Patch Trucker Hat (Medium, Grey - Apollo 13)

  • Style: basic cotton baseball cap logo embroidered trucker hat.
  • Trim/Embellishment: cotton baseball cap with NASA logo embroidered on front and apollo 13 patch on side. trucker cap has adjustable strap back closure..
  • Crown: round top button dad hat. inner of cap is lined with sweatband for optimal wearing comfort..
  • Officially approved high-quality NASA logo baseball cap..
  • Inner band: approx. [M] 57cm (7 1/8) [L] 60cm (7 1/2) / brim width: approx. 8cm (3").
Check Stock

6 Pcs Christmas Coral Glitter Metallic Sequins and Damask Weave Artificial Poinsettia Flowers Picks Tree Ornaments 9.8' W for Christmas Tree Wreaths Garland Floral Winter Wedding Holiday Decoration

  • ... are dotted with glitter along the edges. The wire stems are flexible for using in various ways..
  • Christmas Coral Poinsettia Tree Ornaments are perfect for Christmas tree, Christmas wreaths, Christmas garland, holiday display, table setting, seasonal centerpiece, mantel decor, banister decor, home decor, gift basket embellishment, winter wedding embellishment, party embellishment, New Year’s celebration embellishment, Valentine’s gift, floral arrangement, bouquets, and so much more! These artificial picks are durable, they will remain glamorous and sparkling for the whole holiday!.
Check Stock

Broken Wings Patch Small - 5x1.75 inch

  • Broken Wings Patch Small measures 5x1.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your l....
Check Stock

Oakland Patch - 4x1 inch. Embroidered Iron on Patch

  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to....
Check Stock

1789 2nd Second Amendment Homeland Security Womens Pink Embroidered Patch

  • 2nd Amendment Rocker Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your ....
Check Stock

Chicago City Flag Patch - 3x2 inch. Embroidered Iron on Patch

  • Chicago City Flag Patch measures 3x2 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leath....
Check Stock

Game Over Marriage Patch Medium - 3x3.75 inch. Embroidered Iron on Patch

  • Game Over Marriage Patch Medium measures 3x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch....
Check Stock

Machine Gun Bunny Rabbit Patch - 3.1x3.75 inch. Embroidered Iron on Patch

  • Machine Gun Bunny Rabbit Patch measures 3.1x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorc....
Check Stock

Respect is Earned Loyalty is Returned Patch - 4x1.5 inch - Embroidered Iron on Patch

  • Respect is Earned Loyalty is Returned Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this ....
Check Stock