Top Pneumatic Clamps

Beduan 3 Way Shut Off Ball Valve, 1/2\ Hose Barb 2 Switch Brass Y Shaped Valve

  • This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Package including 1pcs 1/2" male Y valve, 3pcs 1/2" femalex 1/2 barb, 3pcs hose clamps, Teflon Tape..
  • Barbed edges provide positive connection..
  • Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively, and can also close one of them as a 2 way valve, whatever you want..
  • Can be used in pneumatic system. It is not lead free, so please do not use it on water lines..
Check Stock

Wztepeng CV Joint Boot Installation Tool, CV Axle Removal Tool, CV Boot Tool Compatible with: Vtt, Toyota, Corolla, Audi, BMW, UTV, ATV

  • Simple single-button operation expands the CV boot in seconds to fit over the CV joint.
  • Available separately or in a kit with CV Boots, grease, and clamps.
  • Each tool supplied with an Industrial Milton 1/4 In. body 1/4 In. NPT air hose nipple and an instruction sheet.
  • Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team.
Check Stock

Babydoll Lingerie for Women,Women's Sexy Fishnet Lingerie Sparkle Rhinestone Stripper Outfits Exotic Sets

  • TACKLE TOUGH SANDING JOBS: The 315 pneumatic straight line sander’s twin piston design keeps extra power in reserve to prevent stalling and handle heavy duty sanding jobs, like smoothing down body filler or shaping and leveling large flat surfaces.
  • ERGONOMIC DESIGN: Every detail of the tool is shaped to fit your hand perfectly and the lever throttle takes pressure off of your palm.
  • ADJUSTABLE: With variable speed up to 3,000 reciprocating strokes per minute, you can adjust the sander’s output according to the task at hand.
  • LOW VIBRATION: Two handle design provides a low vibration operation for smooth, precise performance.
  • PAPER SIZE: Paper size should be 17.5” long to accommodate wrap-around clamps.
Check Stock

826 Pieces Universal O-Ring Kit, SAE Metric Rubber O-Ring Washer Assortment Kit for Plumbing Automotive Faucet Repair More, Nitrile Rubber O Ring Set with 4 Pick & Hook

  • ★【826PC Faucet Repair Kit 】This O-Ring Assortment Set holds 407pcs SAE standard rubber o-rings and 419pcs metric universal standard rings Provides sealing and prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic & pneumatic repairs and much more..
  • ★【Have 32 Sizes】Metric O-rings standard have 32 sizes from 3 mm I.D. to 50 mm I.D. SAE O-rings standards have 32 sizes from 1/8” I.D. x 1/4” O.D. to 2” I.D. x 2-1/4” O.D. and outer diameters from 6 to 57mm..
  • ★【Oil Seal Hook】Comes with 4pcs extra hook and pick set, it will allow you to easily remove O-Rings and various seals and bushings. The long shaft allows you to access areas that conventionally sized hook and picks just can't reach. These long hooks and picks are perfect for removing hoses, moldings, clips, clamps, seals, O-rings, cotter pins, gaskets and more!.
  • ★【Premium Quality】Our o ring assortment made of high quality rubber construction gives these o-rings oil and UV resistance, make rings with extra thick wall design provides long-term use. idea for repairing cars, faucets, pipes, hydraulics, pneumatic machines, and more.
  • ★【Easy to Storage】Each one comes in a heavy-duty plastic storage case that keeps each size separated and org....
Check Stock

SHZOND Bag Air Jack 6600LBS Weight Capacity 3 Bag Pneumatic Jack Handy and Easy Storage Air Jack Lift for Fast Set Up on Frame Machine (3 Bag air Jack)

  • Bag air jack weight capacity:6600lbs.Working pressure: 145Psi/10Bar/1.0Mpa.
  • Pneumatic jack lifting height range: 5.71”-15.75”.Air inlet: G1/4.Lifting time: 5sec.Working Temp: -60℃~ 50℃.
  • Powerful and very fast to use.Triple bag jack is the easiest and fastest way to install pinch weld clamps on the frame machine.
  • The air jack has large stressed area, fits on soft and easy-collapsing terrain.
  • Do not try to lift weight beyond capacity.
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

1/2’’ ID × 3/4’’ OD - 10 ft Clear Braided Hose Plastic Vinyl Tubing, with 2 Clamps High Pressure Flexible Reinforced PVC Tube for Transfer Water Air Oil, BPA Free & Non-Toxic

  • 003c/b003e[MULTIFUNCTIONAL]:003c/b003e The clear hose is ideal for household and industrial applications for transfer water, oil and gas in aquarium, ponds, vacuum, filter, air conditioning, humidifier and other equipment. Also used used for factory airlines, automation machinery, and pneumatic lines..
  • 003c/b003e[2 CLAMPS]:003c/b003e This item includes 2 steel clamps for installation. You can clamp the PVC braided tubing and and the machine fittings together to prevent it from slip off..
  • 003c/b003e[MULTIPLE CHOICE]:003c/b003e There are various lengths and sizes available, you can choose according to the actual use, and the plastic water tubing can be easily rolled up and stored well, also can be cut with cutting tool to meet various applications..
  • 003c/b003e[GOOD SERVICE]:003c/b003e Our aim is to provide durable vinyl tube. Any questions, please feel free to contact us, I will provide solutions within 24 hours..
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock