Top Pool Installation Level

ORAPXI Salt Water Pool Tester Professional Salinity Meter for Sodium Chloride Swimming Pool and Spa Salt Tester Range 0-9000ppm

  • Check the Salt Concentration of Pool- Helpful in determining salt level in pool with salt chlorinator generator.
  • Most saltwater pool require salt level of 2400ppm~4500ppm（as sodium chloride）in pools. This tester with a range from 0~9000ppm, which meets measurement requirement for pool..
  • More Accurate Measurement Result- The salt detection tool with an LCD backlight display, can display the measurement results clearly and intuitively. Compared with salt test strip, it is more convenient to use and can be reused..
  • Application- Works only for salt water pools/swimming pools/spas. Will NOT work for marine/salt water fish tank/food salt level testing..
  • Backlight Display with Alerts- When the salt level is less than 2700ppm or higher than 3400ppm, the green backlight display will change to red to alert you. Because if the salt level is too low, salt generator will not produce the correct amount of chlorine.
  • if the salt level is too high, may cause damage to saltwater pools..
  • Easy to Use- Just dip electrode into the saltwater pool or take a cup of sample for measurement, and then obse....
Check Stock

Saltwater Pool Test Strips, Swimming Pool and Spa Salt Test Strips Kit for Sodium Chloride Content 0-8000 ppm, 25 Count

  • ...mfortable to chlorine. However,it must be maintained regularly to keep clean..
  • WHY MEASURE SALT IN THE POOL: Most saltwater pool require a salt content of 1,500-4,500 ppm as sodium chloride (NaCl) in the swimming pool. If the salt concentration is too high, it can cause damage to saltwater pool. However, if the salt level is too low, this can lead to an unsafe swimming level as there won‘t be enough chlorine produced..
  • FAST TO TEST SALT FOR POOL: Immerse all the testing parts of the test strip into water for 1 second and take it out；Do Not shake excess water off , hold the strip horizontally for 5 seconds；Compare against the color chart and read immediately for accurate results. The ideal salt level for most saltwater pool is 3200 ppm. Before adding salt to your saltwater pool, test the water to check your salt level..
  • SPECIALLY FOR SALTWATER POOL: Each salt pool test strips is made of high quality PET paper that provides instant and reliable results. No need to shake the strip after dipping into water, just wait 5 seconds and faster to get results for your saltwater pool，also swimming pool and hot tub..
  • TIPS FOR ACCURATE RESULTS: Keep wet fingers away from the strips. Read under natural daylight for best results. After you open the product, plea....
Check Stock

XtremepowerUS 75125 Pump Pool Above Ground 1.5HP Single Speed, Black

  • Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation.
  • An extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning.
  • Heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation..
  • Dual threaded 1.5 in. female union connection. Slip union connection for simple installation.
  • Self-priming pump discharges air from water intake to prevent motor from running dry | 2pc-Union Fitting Sold Separately (ASIN: B01FNEQ96G).
Check Stock

Winter Cover for 27-Foot Round Above Ground Swimming Pools | Total Cover Size 30-Foot | Blue/Black Reversible | 3-Foot Additional Material for Secure Installation

  • ...for your winter closing needs. It is both lightweight and a cinch to install. This cover comes in reversible blue or black convenient color options. Dollar for Dollar you won’t buy a better cover!.
  • FULLY COVER YOUR POOL – This cover comes with 3 ft. of overlap making it a 30’ round cover, allowing for a secure installation. This additional material is used to compensate for lower water levels, use of an air pillow and the swimming pool top rails. Secure this cover to your swimming pool with grommets placed every 3’. Includes a vinyl coated cable and winch..
  • DRAIN THE RAIN – Winter covers are designed to protect your swimming pool against rain, snow and high winds. It is highly-recommended that all excess water be removed from atop the cover during the off-season. This will extend the longevity of the material and can be accomplished with the use of a cover pump or siphon..
  • DESIGNED TO DEFEND – Close your swimming pool confidently with double stitched and triple thick hems using UV resistant nylon threads that are used to withstand the sun. This lightweight cover has 8×8 scrim per square inch..
  • WINTER IS APPROACHING – The installation of a winter cover will likely require some assistance from friends, family or a friendly neighbor. In advan....
Check Stock

Buffalo Blizzard Supreme Winter Cover for 16-Foot Round Above-Ground Swimming Pools | Green/Black Reversible | All Covers Include 4-Feet of Overlap Material for Secure Installation to Measure 20-Feet

  • ...take off of your swimming pool as well as taking up less space for off-season storage! Its “Hold-tite” reinforced seams will last longer and won’t rip, fray or come apart..
  • FULLY COVER YOUR POOL – The Buffalo Blizzard Pool Cover comes with 4 ft. of overlap making it a 20’ round cover, allowing for a secure installation. This additional material is used to compensate for lower water levels, use of an air pillow and the swimming pool top rails. Secure this cover to your swimming pool with grommets placed every 3’. Includes a vinyl coated cable and winch..
  • DRAIN THE RAIN – Winter covers are designed to protect your swimming pool against rain, snow and high winds. It is highly-recommended that all excess water be removed from atop the cover during the off-season. This will extend the longevity of the material and can be accomplished with the use of a cover pump or siphon..
  • DESIGNED TO DEFEND – Close your swimming pool confidently with double stitched and triple thick hems using UV resistant nylon threads that are used to withstand the sun. This lightweight cover has 10×10 scrim per square inch. Made from tough polyethylene fabric it’s the toughest, most durable material available that keeps unwanted items from falling into your swimming p....
Check Stock

Bylot Pool Water Leveler Automatically Adjusts The Pool Water Level

  • PATENTED LEVELER AUTOMATICALLY ADJUSTS POOL WATER LEVEL- Automatically keeps your pool water level at a stable level with a float valve that fills the....
  • BUILT-IN PRESSURE REDUCING VALVE- Unlike other pool levelers where you have to separately purchase an additional pressure reducing valve for your....
  • COMES WITH ADJUSTABLE FEET ON THE BASE FOR SLOPED POOL EDGES- The Airlie Pool Leveler features a set of adjustable legs that are easy to raise and....
  • USER FRIENDLY, FILLABLE BASE INCREASES STABILITY- The base of the leveler can be filled with water or sand adding stabiity and keeping it balanced....
  • AIRLIE LIFETIME WARRANTY- Each leveler comes with a 100% guaranteed lifetime warranty..
Check Stock

ECOPOOLTECH-Swimming Pool Heat Pump-Swimming Pool Heater-for Above Ground Pools up to 5000gallons 14000BTU/hr Titanium Heat Exchanger.

  • ...ve ground pools with up to 5000 gallons of water (No bigger than 16ft round or 10x20ft oval). This unit can operate at outdoor temperatures of 40ºF to 105 ºF, while the swimming pool can be heated up to 100ºF.
  • [Easy to Install]:The heat pump pool heater EU50 allowing fast and easy hookup without professional installation. Just hook up several quick connectors, then plug and play. No need professional tools. No need a plumber. Watch the video to see how simple it is..
  • [High Specs] The pool heat pump EU50 equiped with powerful compressor, outputs a capacity of 14000BTU/hr. The pure titanium heat exchanger can resist any corrosion from pool water. Intelligent control system maintains the pool temperature at a consistent level. Once it starts operating, you don’t need to adjust any settings, just enjoy a warm and heated swimming pool..
Check Stock

Optimum Pool Technologies Replacement Flow Switch for Pentair IntelliChlor IC20 & IC40 Salt Cell - Replaces 520736

  • Replaces: Pentair Intellichlor Flow / Temp Switch Model Number 520736 (IC-20 & IC-40 Systems).
  • 4 Wire connection, Arrow on switch indications the direction of water flow, ensuring proper installation.
  • Manufactured by Optimum Pool Technologies. Please see product video for installation instructions..
  • Does not read salt level* This product ONLY fixes water FLOW and water TEMP issues with the IntelliChlor Salt Cells. THIS DOESN'T READ THE SALT LEVEL. THIS WILL NOT FIX A LOW SALT READING..
  • Refer to Troubleshooting Tips as well as Wiring Diagrams on this product page for product assistance. Red and Black/Blue wires detect the flow, White and Green wires read temperature. If replacing this flow switch doesn't fix the salt cell problem, it is likely that the whole cell needs to be replaced..
Check Stock

Hth Alkalinity Plus 5 Lbs.

  • Function: PROPART CL200 in-line automatic chlorinator can automatically inject the injected chlorine tablets, rods or bromine tablets into the flowing water, and then enter the above-ground pool to achieve the purification effect. The in-line chlorine feeder can handle up to 40,000 gallons of water..
  • Operation: The Easy-Lock cover is designed on the top, you can safely and easily place the chlorine tablets, and add a finger release button to improve safety. The dial control valve has a 2-inch inlet and outlet, a 360° knob controls the pressure release level, and the feed speed can be easily adjusted..
  • Material: High-Strength ABS material, longer service life, high-quality Viton seal, improved corrosion resistance, safer and longer lasting..
  • Installation: No need for complicated tools, just use PVC pipes to easily install it on new equipment or existing equipment, suitable for any existing swimming pool or spa and new swimming pool or spa. There are detailed instructions in the software package to make everything simple..
  • 3-Year Warranty: Our products provide a three-year warranty period. During this period, you can contact us if you encounter any problems, and we will solve it for you within 24 hours..
Check Stock

YCKYIGO Salt Water Pool Tester Large Range 7 in 1 Multi-Parameter Tester for Salt Swimming Pool and Spa

  • 【Wonderful Helper for Pool Salinity Measurement】This salinity meter is perfect for testing the salinity of swimming pools. It helps you to detect the salt level in your salt system. Scale range: 0~9999 ppm/10.0~200 ppt and 0.00-25.00%..
  • 【Detects Free Chlorine Levels】The ORP value is a measure of the oxidative power or sterilization strength in water pool salt. The higher the ORP value in water, the stronger the oxidative power and sterilization ability. The ORP's can reflect the residual chlorine (FAC) levels in the Saltwater pool..
  • 【Highly Sensitive PH Probe】A low pH means the water is acidic, which can be corrosive to pool equipment and pool surfaces. It may also cause skin and eye irritation. A high PH value can greatly reduce the effectiveness of chlorine and cause the water to become cloudy. To avoid problems, it’s important to try and keep it within the ideal range of 7.4–7.6. This PH test pen will do the job perfectly..
  • 【Platinum Electrodes for TDS】Total Dissolved Solids (TDS) is a measurement of all dissolved solids in pool water. The higher the TDS reading, the harder it is to maintain clea....
Check Stock

WaterWarden 4’ Pool Gate Pool Fence Gate - 30” Wide Self-Closing and Removable Pool Door Coordinates with 4x12 ft Outdoor Child Safety In-Ground Pool Fencing Easy DIY Installation

  • SELF-CLOSING GATE – An accessory for your WaterWarden Safety Fence, it allows easy access to the pool and provides an unmatched level of safety and....
  • STRONG & DURABLE – WaterWarden Inground Pool Safety Gates are made of the same super-strong, UV protected Meshylene fabric as the safety fencing for....
  • COMPATIBILITY – This pool safety gate coordinates with WaterWarden 4’ x 12’ Safety Fence sections. It measures 4’ x 30”..
  • DIY INSTALLATION – This WaterWarden Self-Closing Gate is easy to install. This kit includes an automatic magnetic lock and self-closing hinges for....
  • WATERWARDEN – With state-of-the-art technology and a keen understanding of pool safety born of over five decades of experience, WaterWarden....
Check Stock

Bestway Flowclear Sand Filter Pump w/GFCI Plug | 800 Gallon/Hour Flow Rate | Cleans Water for Above Ground Pools

  • EFFICIENTLY FILTERS POOL WATER: The sand traps dirt and debris in a durable, corrosion-resistant filter tank as a pre-filter strainer basket catches larger debris, such as leaves, hair, and dirt to ensure that the pump lasts many summers of use. Water flows through the pool pump at a flow rate of 800 gallons/hr..
  • CLEAN, HEALTHY WATER: Our filter comes with the ChemConnect Dispenser, which maintains gentle and skin-friendly water by providing a stable level of chlorine that is evenly dispersed throughout the entire pool..
  • COST-EFFECTIVE SOLUTION: A sand filter pump uses silica sand instead of a traditional filter cartridge. Those cartridges need to be replaced every 2 weeks while the sand lasts up to 3 years. Sand is not included..
  • HASSLE-FREE ASSEMBLY: This product arrives pre-assembled for added convenience. A top flange clamp design with 360 degrees rotation s quick and smooth installation..
  • IDEAL FOR ABOVE GROUND POOLS: Compatible with most 300-4, 200 gallon capacity above ground pools. An adapter is included if the pool valve diameter has a diameter of 1. 25 inches..
Check Stock