Top Power Circular Saws Magnesium

Milescraft 14000713 Saw Guide for Circular and Jig Saws

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

VANTTECH 2Pack P104 18V 4.0Ah Replacement for Ryobi 18V Battery Lithium P108 P105 P102 P103 P107 Compatible with Ryobi 18 Volt Cordless Power Tool

  • 100% compatiable with Ryobi 18v cordless power tools. Use this on your cordless routers, circular saws, reciprocating saws, blowers, and more.
  • MORE POWER: This extra large battery holds over 4 times more power than the other, smaller models.
  • QUICK CHARGE: The P108 can be fully charged in as little as one hour FUEL GAUGE: An onboard fuel gauge lets you know how much power you have before it needs recharging.
  • Worry-free 12-Month. Please just freely contact us for any problems.
Check Stock

Bosch Professional Circular Saw Blade Standard (for Aluminium, 173 x 20 x 1.8 mm, 60 teeth; Accessories: Cordless Circular Saw)

  • Maximised battery runtime thanks to the extra-thin cutting edge.
  • Clean cuts and precise results thanks to high-quality carbide teeth.
  • Reduced noise, fewer vibrations and less heat thanks to expansion slots.
  • The saw blade fits all common cordless plunge saws and hand-held circular saws as well as cordless metal saws.
  • The circular saw blade is ideal for cutting aluminium and other non-ferrous metals, plastics, epoxy resin and even wood.
Check Stock

MOTORHEAD 6-1/2-Inch 24-Tooth Fast Framing Tungsten Carbide Tip Circular Saw Blade Thin Kerf Non-Stick Corrosion-Resistant 5/8” Arbor Universal Corded & Cordless 24T USA-Based Support

  • [ENGINEERED FOR FAST CUTS & FRAMING] – Optimized for fast cross & rip cutting softwoods, hardwoods, plywood, chipboard, multi-board, panels, MDF,....
  • [CORDED OR CORDLESS: FITS ALL 6-1/2” CIRCULAR SAWS] – Fits all corded and cordless 6-1/2” circular saws with a 5/8” arbor..
  • [POWER SAVING & EFFICIENCY MAXIMIZING ULTRA-THIN KERF w/ LONG LASTING TUNGSTEN CARBIDE COATING] – Make more precise cuts for longer. Tungsten....
  • [SMOOTH OPERATOR] – Anti-Kickback design provides smoother cuts with minimal kickback. Features an anti-stick rim that reduces friction and gum-ups..
  • [CRAFTED 4 CRAFTSMEN: LIFETIME USA SUPPORT] – All MOTORHEAD Tools are designed, crafted, and rigorously tested by craftsmen for craftsmen. Protected....
Check Stock

Tekware Masonry Saw with Dust Extraction, 110V 5 in Circular Saw, Light Weight Circular Saw for Wood, Masonry, Tile, and Concrete

  • DUST-FREE DESIGN: Tekware masonry saw built in a smart dust collection system that reaches 98.76% dust absorbing effect, offers you a healthy work environment.
  • POWER & ACCURACY: Power 10.9 amp motor delivers the 12,000 RPM cutting power to cut through wood, or granite, porcelain, concrete and other stone materials.
  • HiGH CAPACITY: The power circular saws will cut up to 1.57"(40mm) depth cutting capacity, 3.92"-4.93"(100mm-125mm) saw blade diameter.
  • WIDE APPLICATION: This circular saw can be used for home decoration and industrial wall/floor grooves. You can cut grooves in concrete, brick, marble.
  • HEALTHY & LIGHTWEIGHT: The 7.87" (2m) dust suction tube and dust bag protect you from dust infestation. The saw weighs only 10.8 lbs for comfortable operating.
Check Stock

5-4/5' 52 Teeth Carbide Tip Circular Saw Blades Radial Arm Saw Blade Table Saw Blade Miter Saw Blades with 4/5' Arbor for Woodworking

  • Saw Blades Specifications - 5-4/5" Ultra-thin kerf Wood Cutting Circular Saw Blade for fast cutting, Teeth: 52T, Diameter: 5-4/5"/ 147mm, Arbor: 4/5"(20mm), HI-Density Carbide Tip for Maximum Performance.
  • MAX RPM - 10000, Kerf: 0.055"/1.4mm, Hook Angle(forward): 20 Degree, Tooth design: ATB, Fast and Smooth Cuts..
  • ATB Tooth Design to facilitate splinter discharge and to prevent the saw blade from being blocked by sawdust, make cutting easier. Extra-hard steel blade body - delivers accuracy and resists bending and deflection for true cuts..
  • Laser cutting Anti-Vibration Slots can drastically reduce vibration and sideways movement during the cutting process, Also help channel heat build-up during the cutting process, allowing the blade to expand and contract, extending the blade life..
  • Upgraded to Teflon surface coating, strong non-stickiness, lowest friction coefficient, anti-adsorption, high-temperature resistance. Smooth and efficient rotation..
  • Ideal for ripping and crosscutting on softwood, hardwood, plywood, chipboard with fine finishing, not for metal cutting. Widely use for Circular Saws, Miter Saws, Table Saws, Hand Saws, and Chop Saws, save your time and energy..
Check Stock

MOTORHEAD 6-1/2-Inch 40-Tooth Precision Fine-Finish Tungsten Carbide Tip Circular Saw Blade, Thin Kerf, Non-Stick, Corrosion-Resistant, 5/8” Arbor, Universal: Corded & Cordless, 40T, USA-Based Support

  • [ENGINEERED FOR PERCISE CUTS & FINE FINISHES] – Optimized for fast cross & rip cutting softwoods, hardwoods, plywood, chipboard, multi-board, panels, MDF, plated/counted-plated panels, laminated/bi-laminate plastic, and FRP. Creates exceptionally fine finish clean, chip-free cuts with little sanding required..
  • [CORDED OR CORDLESS: FITS ALL 6-1/2” CIRCULAR SAWS] – Fits all corded and cordless 6-1/2” circular saws with a 5/8” arbor..
  • [POWER SAVING & EFFICIENCY MAXIMIZING ULTRA-THIN KERF w/ LONG LASTING TUNGSTEN CARBIDE COATING] – Make more precise cuts for longer. Tungsten carbide coating provides extra protection and stays sharper longer. Ultra-Thin Kerf helps power through the densest of woods using less energy.
  • simultaneously extending & maximizing battery life..
  • [SMOOTH OPERATOR] – Anti-Kickback design provides smoother cuts with minimal kickback. Features an anti-stick rim that reduces friction and gum-ups..
  • [CRAFTED 4 CRAFTSMEN: LIFETIME USA SUPPORT] – All MOTORHEAD Tools are designed, crafted, and rigorously tested by craftsmen for craftsmen. Protected by unbeatable lifetime US-based support.
Check Stock

Power Tool Organizer with Circular Saws Holder, 3 Drill Charging Station, Power Drill Storage Wall Mount Great Workshop Organization and Storage Gift for Men (Need Assemble)

  • ▶ALL IN ONE CABINET◀: The power tool organizer has a large capacity to put your power tools, circular saws, jig saws conveniently and makes your tools look neat..
  • ▶DURABLE AND STRONG◀: With upgraded material, the power tool organizer is made of pinewood and has large storage compartments..
  • ▶SPECIAL DESIGN◀: The storage is appropriately constructed for organizing your tools. No worries of thinking about where to put your tools..
  • ▶EASY TO STORE◀: The Tool Storage features ample space, high quality and well design, which is very useful and convenient for daily life. You can easily look for your tools and organize them..
  • ▶WARRANTY◀: Comes with 30-day money-back guarantee for any reason and 1 year warranty for quality-related issues..
Check Stock

BORA 100 NGX Clamp Edge Straight Cut Guide for Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length 544100

  • Clamping end moves with handle for easy adjustability from one side.
  • Locking handle grabs work surfaces for a secure grip that won’t budge.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Use with circular saws, routers, Jig saws, and other portable power tools.
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors.
Check Stock

Missvig Cosplay Wig Demon Slayer Short Gray White Halloween Wig Synthetic Hair Anime Custom Party Hair

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

SKIL 16-5/16 In. Magnesium Worm Drive Skilsaw Circular Saw - SPT70V-11

  • 6-1/4 inch cutting capacity for one-and-donE, clean cuts through 6x and lumber up to 6-1/4 inch thick.
  • Largest capacity worm drive circular saw that delivers relentless power for the biggest jobs.
  • Tough, durable magnesium die-cast footplate ensures accurate cuts every time.
  • All magnesium construction for durability and reduced weight.
  • 15 AMP Dual-Field motor keeps the motor cooler to provide increased power.
  • 16-5/16 In. SKIL blade to make perfect cuts right out of the box.
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock