Top Power Line Fittings

Speedway Motors Universal 1964-72 GM Power Steering Hose Kits

  • Power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits.
  • Return hose will normally need to be cut to length.
  • High Pressure Line: 24" long, Inverted flare fittings, one 5/8"-18 and one 11/16"-18.
  • Return Hose: 25" long, 5/8"-18 inverted flare fitting.
  • 1964-72 GM Power Steering Hose Kits help complete your project.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

wolltex 3 in 1 Wrap Air Power Line 15 Feet Heavy Duty 7 Way semi Truck Trailer Electrical Cable ABS Wire & Air Hose Assembly with Aluminum Service Emergency Glad Hands (Hosses with accesories)

  • KIT CONTAINS: 3-IN-1 Heavy duty 15 feet trailer air line & ABS wrap cord assembly + 1 pair Gladhands (Red + Blue) + 1 pair Extension Handles..
  • THE 3 IN 1 AIR POWER LINE CONTAINS: Service air line rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃), Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
  • THE EXTENSION HANDLE: Installed between glad hands and air brake lines. It is easy to install. Provides added leverage for coupling/uncoupling gladhands without damaging the hose ends and fittings. Rugged anodized aluminum is more durable and corrosion resistant than cheaper plastic models. Diamond knurled textured exterior for improved friction..
Check Stock

mistcooling Pre-Assembled, Low Pressure System Kit,25' Mist Ring,Recommended for Fans with 30-46'' Di, 25 Inch Diameter 8 Nozzles, Beige Color Tubing

  • 8 - Nickel-plated brass Nozzles, 7 misting Line Tubing,1 - 6 ft feed Line,1 - end elbow, 7 - misting tee, 8 Zip ties.
  • Nozzles:Nickel-plated brass button series ,With stainless-steel Orifice ,Standard 10/24” thread ,in 0.015” OD Orifice ,Rust-resistant fixed impeller pin.
  • Fittings :¼” OD Compression Fittings,Beige Color to blend with most patios and backyards,Compression Type Fittings,Leak Proof.
  • Garden Hose Adapter : ¾” OD, Fits most Garden Faucets ,With Filter Washer to protect your nozzles.
  • Tubing :¼” OD Flexible PE Tubing ,Operating Pressure 40 to 100 PSI ,UV Resistant Flexible Tubing.
  • 25'' Fan Mist Ring with 8 or 10 Nozzles -Recommended for fans with 30-46'' Diameter.
  • Supply Line : 6 Ft Feed Line, Low Pressure tubing , Beige Feed Line.
  • Simply fix to your garden hose and ready to use.
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL:Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING:Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION:Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

Foruly for 13 15 18 Eaton Fuller Transmissions Air Line Kit, 4 New 12" 5/32 Air Lines with 4 Air Line Shift Knobs & New Push-in Fittings for Changing from Shift Knob to Transmission Air Shift Valve

  • ...high and low gears, friction noise in high and low gears, slipping clutch damage, and ultimately transmission failure and expensive repairs..
  • 【New Air Line Kit】: This shifter air line kit will update your transmission air system and make it simple for you. Replaces all fittings and updates to a high capacity 4-color air line between the shift knob and transmission valve..
  • 【Saves Time & Money】: This kit allows the transmission to shift faster and more efficiently by providing more air volume to the shift valve, resulting in less wear on synchronizers and gears during high and low speed shifts..
  • 【New Push-In Fittings】: These new style push-in air fittings will allow you to slide the line into the fitting without any possibility of over-tightening like the old style fittings. Over tightening the air fitting will collapse the line and cause restricted airflow which will cause slow shifts and wear on the synchronizer and gears during low to high speed and high to low speed shifts..
  • 【High Quality】: Made of pure material, refuse to return material, give you new new mat....
Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

  • Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
  • Please confirm the size of the details according to the picture before purchasing.
  • Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
  • You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
  • Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
  • Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
Check Stock

Auto 4 Port Underdash Compact Heater Kit 13X Copper Tube+Speed Switch Set for Truck Universal Trucks Minivans Excavators Harvesters Tricycles

  • ♥【Specification】①Optional Voltage: 12V.②Power supply: 12V / 8A.③Material: Copper, Iron.④Weight: about 3KG. ⑤Size: 23 x 21 x 10cm/9.3" x 8.5" x 3.9". ⑥Fitting required - 5/8'' (16mm) inner diameter water hose..
  • ♥【Feature】①Comes with mounting brackets and control switch.②Very easy to install , only need to hook this heater up to water tank and supply power , then works..
  • ♥【Package】Included: ①1pcs x heater. ②4pcs x Black tubes. ③2pcs x Tee. ④2pcs x mounting brackets.⑤1pcs x switch.⑥2pcs x straight fittings. ⑦8pcs x 16-25cm hose clamps..
  • ♥【Instructions】①The red line is connected with a power supply's positive pole and motor's positive pole.②The blue one is connected with the motor's negative pole.③The black line is connected with a power supply's negative pole..
  • ♥【Using】①Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..
Check Stock

Eemax SP35

  • Ease of installation - No T and P valve needed - Only bring one cold water line to lavatory.
  • Connections: 3/8-Inch compression fittings at top of unit.
  • Temperature rise at .5GPM = 48 Degree Fahrenheit, Turn on: 0.5.
  • Dimensions: 10.75-Inch W x 5.25-Inch H x 3-Inch D.
Check Stock

Laing LHB08100081 Low Flow Circulating Pump with Cord, Sweat

  • Rated for temperatures to 230 degree F and line pressures to 150 PSI.
  • Dry run cutout provided on pumps for hot water recirculation.
  • BS 1/2-Inch – Brass inline housing with 1/2-Inch sweat fittings.
Check Stock

Laing LHB08100085 Low Flow Circulating Pump with Cord, Threaded

  • Rated for temperatures to 230 degree F and line pressures to 150 PSI.
  • Dry run cutout provided on pumps for hot water recirculation.
  • BS 1/2-Inch – Brass inline housing with 1/2-Inch threaded fittings.
Check Stock