Top Power Tile Masonry Saws

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4.5 Inch Diamond Blade, Diamond Turbo Saw Blade for Angle Grinder, General Purpose Cutting Concrete, Masonry, Brick, Granite, Marble and Other Stone, Wet/Dry Cut, 7/8\ Arbor

  • Manufacturing Technique: Sinter Hot-pressed Segmented Diamond Saw Blade. It achieves a faster cutting speed and longer cutting life-span in different materials..
  • Superior Quality designed for fast speed and stable life to Cut Concrete, Masonry, Brick, Granite, Marble and Other Stone materials..
  • The diamond turbo cutting blade is suitable to be used on the angle grinders, circular saws, tile saws, hand-held power saw. Please follow the safety symbols before the cutting work starts..
  • It’s Universal application in dry or wet cutting..
  • Segment Height: 10mm, Arbor Size: 7/8” with 5/8” copper bushing..
Check Stock

Bardland JC-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(JC-156 6\/ 1 Packing)

  • SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
  • FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
  • FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
  • SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
  • MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..
Check Stock

Bardland HNT-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(HNT-156 6\/ 1 Packing)

  • SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
  • FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
  • FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
  • SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
  • MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..
Check Stock

Super Thin Diamond Porcelain Saw Blade with X Teeth,BRSCHNITT 8 Inch (200mm) Diamond Cutting Disc with Reinforced Core Center for Dry/Wet Cutting Porcelain Tile Ceramic Marble Granite

  • ✔Size --8 inch (200mm),diamond height 10mm ,segment thickness 1.8mm ,Arbor 1"-7/8"-5/8"(25.4mm-22.23mm-16mm) , wet or dry cutting.
  • ✔High Performance --The reinforced core center helps to keep balance,unique X Mesh Rim design allows for less friction and more efficient heat dispersion for superior cutting performance.
  • ✔Wide Applications --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
  • ✔Fast And Smooth Cutting --Chip-free,offer faster cutting speed,guarantee a precise and smooth edge finish.
  • ✔Machine --For use on Tile saws, circular saws, and hand-held angle grinders.
Check Stock

PEAKIT Tile Cutter Blade 4.5 Inch Porcelain Diamond Blade Ceramic Cutting Disc Wheel for Angle Grinder Reversible Color

  • ✔ Peakit Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid....
  • ✔ Our Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
  • ✔ This 4 1/2 inch tile cutter blade features a 3/8" diamond rim, can be used dry or wet, fits most tile saws and hand-held angle grinders with a....
  • ✔ It is the ideal diamond saw blade for tile installer, general contractors, home made DIYers and tradesmen..
  • ♥ What you will get: fast 4 1/2" diamond blade 1 pcs, lifetime warranty against warping, cracking and material defects, superior customer service..
Check Stock

IVY Classic 26509 8-Inch Carbide Grit Reciprocating Saw Blade 1/Card

  • Cuts cast iron, ceramic tile, metal and masonry.
  • Fits all 1/2-inch universal reciprocating saws.
  • Length: 8-inch, Width: 3/4-inch, Kerf: 0.080-inch.
Check Stock

QEP 6-1008BW Black Widow 10\ Wet Tile Saw Micro-Segmented Diamond Blade for Porcelain, Marble, Granite & Ceramic Tile, 5/8\ Arbor, Wet Cutting, 6115 Maximum Rpm

  • Porcelain certified diamond blade cuts porcelain, marble, granite and ceramic tile.
  • High quality steel with 7 mm, diamond-coated high-rim for less chipping and a cleaner cut.
  • 5/8 in. Arbor fits most brands of wet tile saws.
  • Micro segments help cool the blade and prevent wobbling and chipping.
  • Ideal for high speed cutting of Hard masonry tile.
Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

  • SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
  • Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
  • Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
  • FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
  • INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
  • DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
  • WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..
Check Stock

10\ Diamond Saw Blades for Porcelain Tiles, Ceramic Tiles, and Stone Tile, 5/8\ Arbor

  • CONTINOUS RIM - designed for glass mosaic tile with encrusted diamond particles to minimize any possibility of chipping.
  • CUTTING DEPTH/RPM - 2.5 inches/8730 RPM (max).
  • USE WET ONLY - recommended to use with masonry or table saws.
Check Stock

EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)

  • 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
  • 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
  • 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
  • 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock

SKIL 7-Inch Wet Tile Saw - 3540-02 & QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade, 7mm Rim Height, 5/8-Inch Arbor, Wet Cutting, 8730 Max RPM

  • Product 1: Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch.
  • Product 1: Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Product 1: Blade cooling water reservoir to keep blade cool while minimizing dust and debris.
  • Product 1: Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry.
  • Product 2: Designed for use with a wet tile saw.
  • Product 2: For wet cutting at speeds up to 8,730 RPM.
  • Product 2: 5/8 in. arbor fits most brands of wet tile saws.
Check Stock