Top Precision Square
Woodpeckers Carpenters Precision Square 6 Inch Speed Combination 90 and 45 Degree Red Anodized Aluminum Woodworking Tools Made in the USA For Carpentry Furniture Building
- COMBINATION SQUARE - A perfectly machined combination 90 and 45 with handles for a physical reference to the edge of the work piece..
- MADE IN THE USA - The blade is machined from cast and ground aluminum tool plate.
- BUILT FOR ACCURACY - This expensive material is utilized for its mechanical stability and tendency to maintain close tolerances after machining.
- PRECISION SQUARE - The handles are milled from solid bar stock and fastened to the body with high strength socket screws.
- PRECISION WOODWORKING TOOLS - Anodized for durability and appearance, the Carpenters Square is also engraved with inch scale markings on the vertical....
Check StockLittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)
- 【EXCELLENT QUALITY】:The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
- 【APPLICABLE WORKPIECE SIZE】:The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
- 【FREE ACCESSORIES】:We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
- 【HIGH PRECISION DESIGN】:This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
- 【WIDE APPLICATION】:Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check StockINCRA T-RULE06 6-Inch Precision Marking T-Rule
- Precise, versatile, and easy-to-use are the words which best describe the Incra 6-Inch Precision Marking T-Rule.
- Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy.
- There are micro-fine marking holes and slots at every 1/16-, 1/32.
- Precise, versatile, and easy-to-use T-Rule.
- Combination square for marking with perfect, instant accuracy.
- Micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position.
- Locate your sharp pencil or scribe with absolute precision.
Check Stock81 PCS/SET SQUARE GAGE BLOCK SET w.NIST Equivalent certificate, GRADE B
- 81 PCS/SET SQUARE GAGE BLOCK SET w.NIST Equivalent certificate, GRADE B.
- Description: 81 pcs/set steel precision SQUARE gage block set, grade B--w. tollerance of 50 millionth of inch. All block mirror polished, with serial number and size, WITH GAGE HOLE Complete with NIST equivalent certificate of calibration showing deviation of each block. Meets or exceed Fed. Spec. GGG-G-15C and Conform to MIL-STDD-45662A.
- 9 blocks: .1001" - .1009" in .0001" steps 49 blocks: .101" - .149" in .001" steps 19 blocks: .050" - .950" in .050" steps 4 blocks: 1.000" - 4.000" in 1.000" steps Fitted in heavy duty and precision made wooden box..
Check StockJohnson Level & Tool 400EM-S Heavy Duty Professional Inch/Metric Metal Combination Square 12 Silver 1 Square
- COMBO SQUARE: The square head of this Johnson metal square ruler is CNC machined for enhanced precision. Its Auto-Lock blade assembly makes it easy to....
- STAINLESS BLADE: This combination square tool has a stainless steel blade with English and metric graduations of 1/8", 1/16", and 1/32", as well as....
- CAST ZINC HEAD: The durable acrylic vial, heavy-duty cast zinc head with a chip-resistant e-coating finish, and reinforced screw-in scriber that won't....
- APPLICATIONS: The CNC-machined head of the measuring tool acts as a stop, ensuring layout lines are always square to the edges. This makes it an ideal....
- PRODUCT SPECIFICATIONS: This 12’’ combination square measures 0.75 × 5.5 × 12 inches and weighs 4.8 ounces (0.18 kg). This Johnson Level tool....
Check Stockkammqi Rafter Square with Level Carpenter Squares Triangle Square 7 Inch Square Ruler Aluminum Layout Tools for Woodworking (Silver 7inch)
- 【High quality】:7-inch Rafter Square made of precise Heavy-gauge aluminum alloy, solid aluminum alloy for durability, high hardness and corrosion-resistant, the rafter square has undergone multiple polishing, and the surface is smooth and does not hurt hands, easy to carry..
- 【Precision and Durable 】: Accurate clear scale and permanent markings square ruler is constructed for maximum durability, it has legibility and long-lasting usage, carpenter square give accurate measurement, mark up to the finest millimeter..
- 【User-Friendly】: Easy to read spirit level , you can easily brace the rafter square flush with the wood, embedded magnet has good suction force, the stainless steel ruler is easier to slide for measurement, easy to detach the stainless steel ruler increase product practicality and versatility..
- 【Multi-Function】: 7-inch Multiple graduation rafter square has many kinds of Application, suitable for marking Square And 45-Degree Lines, protractor, framing square, triangle square, marking horizontal base, great companion for carpenters and builders..
- 【Guarantee and Suitability 】: 30 days free replacement parts ,1-year warranty, and full life customer service. Good for carpenters, professionals, hobbyists, craftsman and builders..
Check StockOnyehn XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency Amplitude + Transparent Case Box Shell
- High Precision, can generate sine/triangle/square waveforms..
- Output frequency range: 1Hz-1MHz and Adjustable frequency and amplitude..
- Wide power supply range, use 9-12V external power or 9V battery(NOT Included)..
- This is a DIY kit with All are through hole components,easily assemble the Function Generator by yourself..
- Onyehn XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency Amplitude + Transparent Case Box Shell.
Check StockWoodworking Ruler, 3Pcs Precision Pocket Ruler Metal Slide Rule Inch and Metric T-Type Scribing Ruler Square Ruler T Track Ruler Marking Measuring Ruler with Slide Stops(6/8/12 Inch)
- Includes 2 Squares: 4" / 90° and 7" / 90°.
- Triangle Square - Joinery Layout - Machine Setup - Measure and Marking - Center Finder.
- Triangle Square: CNC Stainless Steel Contruction - Precision Laser Engraving.
- Base: CNC Solid Aluminum Construction - Blue Anodized Finish - Precision Laser Engraving.
Check StockGeneral Tools MG-S278-4R Combination Set with Square and Center Head, Reversible Protractor Head
- THREE MEASURING HEADS: Combines the power of a square, ruler, protractor and centering gauge in one convenient design..
- SQUARE HEAD: Provides 45- and 90-degree angles and also features a level and hardened scriber..
- REVERSIBLE PROTRACTOR HEAD: Measures odd angles with precision and accuracy..
- CENTERING HEAD: Allows you to find the middle of round stock..
- GRADUATIONS: 4R (Every 8th, 16th, 32nd and 64th of an inch)..
- BLADE DETAILS: Made with an etched high carbon steel blade that has a satin finish, and measures 12" in length (305mm)..
- MEETS: Government specification, GGG-S-656C..
- GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check StockWoodpeckers T-Square with Rack-It Mount, 12 Inch, Aluminum, For Precision Woodworking
- INCLUDES - You will receive a 6 inch double square with wall mounting kit. Woodpeckers In-Dexable Double Square 6 inch..
- SLIDING HEAD SUPPORT - The built in sliding head support helps keep you level when you need it, and retracts back when you need the base of the square to be flat..
- PRECISION - All models feature laser cut notches every 1/16 of an inch for accurate parallel scribing..
- VERSATILE - The head can be indexed anywhere along the blade at a full inch mark..
- MADE IN USA - Like all Woodpeckers products, the In-Dexable Square is proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check StockHyper Tough 9-Piece Acetate Handle Screwdriver Set
- Ratchet Screwdriver, Magnetic Holder, Precision Bit Holder, Precision Bit Driver, Bit Adapter.
- 31 - 1-in Screwdriver Bits: Slotted: 3, 4(2), 5(2) & 6 mm Phillips: #0, #1(2), #2(2) & #3 Star: T10, T15, T20, T25, T27, T30, T35 & T40 Square: S0, S1, S2 & S3 Hex: 1, 3, 5 & 6 mm PZ: #1, #2 & #3.
- 20 - Precision Bits Slotted: 1, 1.5, 2, 2.5, 3 & 3.5 mm Phillips: #000, #00, #0(2) & #1(2) PZ: #0(2) & #1(2) Star: T7, T8, T9 & T10.
- 9 - 1/4-in Dr. Sockets: SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2-in. METRIC: 10 & 13 mm.
Check StockIRWIN Tools Combination Square, Metal-Body, 6-Inch (1794468)
- The Black, Precision-Etched Scales On This Combination Square Give Accurate 90° And 45° Readings.
- This Combination Square Has A Cast-Zinc Body For Durability.
- A Stainless-Steel Blade Is Built For Rugged Use.
Check Stock