Top Processing Pipe

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/32 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs (BP400-P)

  • Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

HNHYNSY 1/8\ 1/4\ 3/8\ 1/2\ Female x Male Thread 90 Deg Brass Elbow Pipe Fitting Connector Coupler for Water Fuel Copper (Thread Specification : 1\)

  • Generally speaking, the raw material stainless steel is generally non-magnetic. However, due to a series of processes such as processing, smelting, and heat treatment, a small amount of martensite or ferrite structure will appear in austenitic 304 stainless steel. Therefore, 304 stainless steel will have weak magnetic properties..
  • This product is made of 304 stainless steel, which is hard and not afraid of high temperature and low temperature, which effectively prevents the phenomenon of pipe joints from cracking..
  • Built-in screw cap reinforcement to make the connection between the water pipe and the elbow more stable and not easy to break.
  • The inner wall of the water pipe is smooth, and the sealing is strong, which strengthens the stability of drainage and exhaust, and the resistance is reduced, the faster the conveying.
  • Suitable for water pipe transfer, natural gas gas transfer, sewage treatment water pipe transfer.
Check Stock

CDBP Carbide Grooving Inserts MRMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Yellow Coating, 10pcs

  • Size, MRMN400-M, Width(B): 4mm, Radius(R): 2mm, Longth(L): 21mm, High(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Coating Metal Cutting, 10pcs.

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 1.2mm, Thickness(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
  • You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity..
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • ...installation of our exhaust middle pipe will not cause damage to the original exhaust pipe, so that you can directly replace the original dilapidated pipe to maintain the good working performance of the exhaust pipe..
  • 【Meticulously crafted】Exhaust Header Pipe,The surface is made by Meticulously handwork, and the processing process will not cause creases or damage the strength of the stainless steel, so that the finished product will maintain a bright appearance..
  • 【Hydroforming technology】Exhaust Link Pipe,Pipe hydroforming technology. This process injects pressurized water into each pipe to form an ideal exhaust flow shape, which can better fit the distribution of exhaust pipes for assembly and replacement..
Check Stock

ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill

  • Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft.
  • Stainless steel flexible pipe is more resistant to high temperatures..
  • Air flow and spray mist volume adjustable design, easier to use..
  • In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure).
  • Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
Check Stock

Steel Dragon Tools® 600 PRO Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch fits RIDGID® 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • 【WIDE APPLICATION】: This Pipe Beveling Machine is suitable for petroleum, chemical, mechanical, processing, electricity, construction, mining industries etc..
  • 【Deviation】: less than 0.5mm for one circle cutting up on up to 17" diameter pipe..
  • 【Absorption affinity of magnetic wheel】: more than 110lbs..
  • 【Tube Diameter】: 4-1/4" Pipe and above..
Check Stock

Upgrade Version Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill

  • Stainless steel flexible pipe is more resistant to high temperatures..
  • In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure).
  • Air flow and spray mist volume adjustable design, easier to use..
  • Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
  • Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft.
Check Stock

LJSF clamp Right Angle Clamp, Single Handle 90°Corner Clamp, Aluminum Alloy Right Angle Clip Clamp Tool Woodworking Photo Frame Vise Hold Simple to use and Durable

  • Cantilever bracket metal table lamp clip accessory base hose.
  • Aluminum metal processing standard with 12MM pipe clamp.
Check Stock

GUPE Milling Cutter Tool Reamer Tight Holding 5689003cbr/003ein wearresistant 9SiCr for Metal

  • FOR VARIOUS METAL MATERIALS: reamer is widely used in steel, die steel, aluminum alloy, cast iron, copper, galvanized pipe and other metal materials.
  • DURABLE 9SICR MATERIAL: Adopt good quality 9SiCr overall forging, the cutter body is firm, wear resistant and durable, and adopt processing.
  • TIGHT AND ACCURATE: Come with universal shank type, widely used, possess tight clamping, , and high grinding accuracy.
  • 21‑23MM RANGE: Equipped with a storage box, easy to store and carry. There are a total of 6 flutes on the reamer, range from 21-23mm.
  • FLEXIBLE ADJUSTMENT: Fully automatic refining process is adopted, which can be passed or stopped to meet the technical requirements of processing, very flexible.
Check Stock