Top Protection Tubing

Wirefy 1-1/2\ Heat Shrink Tubing - Large Diameter - 4:1 Ratio - Adhesive Lined - Industrial Heat-Shrink Tubing - 50 Feet Roll - Black

  • 4:1 SHRINK RATIO - Recovers to 1/4 of its original diameter, and makes a tight seal. Highest heat shrink ratio on the market..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Marine grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1-1/2" (40.0mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ...her liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, and makes a tight seal. Easy to use a heat gun. Also Includes handy plastic container for easy organization and storage..
Check Stock

ARIES 4088 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Chevrolet Colorado, GMC Canyon

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Chevy Colorado and GMC Canyon.
Check Stock

AIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll

  • What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
  • Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
  • Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

EHS Water Filter Straw Portable Personal Emergency Filtration Purifier for Camping, Hiking, Survival

  • FREE TUBING INCLUDED – Tubing attaches to both ends.
  • Tubing easily allows for drinking standing or away from the water source, easily drink clean filtered water.
  • No need to put straw directly in to water while drinking and purifying.
  • No need to lay down on the ground to drink water through your water straw..
  • HYDRATION BLADDER, when backpacking easily attaches with adapter.
  • use tubing to connect, for filtering and drinking solutions: mini product easy to use water filtration system, lightweight, keep it in your backpack.
  • versatility, makes this water straw a great choice for camping accessories, kits and supplies.
  • FAMILY AND FRIENDS carry your own personal water straw.
  • area on water straw to write your Name and Start date.
  • adults and children enjoy Safe Hydration Protection.
  • Includes one individually packaged water straw.
Check Stock

Guard Ur Grill [Explicit]

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of....
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter,....
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum....
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This....
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ram 1500 and Dodge Ram 1500.
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

FOR Toyota 2001-2004 Tacoma Grille Black Headlight Park Light 5Pcs TO2502136 TO2503136 TO2520163 TO2521163 TO1200250

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Toyota Tacoma.
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • ...nd high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also available in our store, like 1/2.
Check Stock

AIRSOFTPEAK Natural Latex Rubber Tubing Speargun Band Slingshot Catapult Surgical Tube Rubber Hose 0.2\ OD 0.12\ ID, 33ft

  • ❄【Cross-section Size】-- Outside Dia. 0.2"(5mm).
  • ❄【Super Elastic】-- Made of pure natural latex, it has high elongation. This natural latex rubber tubing can be pulled repeatedly. Good elasticity and durability to meet different needs..
  • ❄【High Quality】-- Superior raw latex processed by advanced technology and exquisite hand crafts. It can contact with human body, non-toxic and environmental protection..
  • ❄【Extensive Use】-- It was variously used as great accessory for slingshot catapult, medical tubing, tourniquet, laboratory, Institute, engine stethoscope, replacement tubing for your swim paddles, spear gun, fishing gear, etc. It has been well received all sides..
  • ❄【DIY Length】-- Total Length: 33ft. You can cut the rubber tubing short to meet your different needs..
Check Stock

Alex Tech 25ft – 1/2 inch Split Wire Loom Tubing Wire Conduit – Black

  • Size: Inner diameter: 1/2"| Length: 25 Feet | Color: Black. Our wire loom is made of 100% new and high quality polyethylene.
  • Our split loom is split and easy to put wires in. Our split loom tubing is thick enough to provide full protection for the wires.
  • Operating temp (degree F.):-94 to 257 | our split wire loom is used to protect electrical wiring in industry,automotive,home & office.
  • Our wire loom tubing is resistance to abrasion & harmful chemicals corrosion.Good chemical stability.
  • Our wire protector tubing is used to wrap wires,and make cables wires neat and orderly.
Check Stock

ARIES 3067 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Ford F-250, F-350 Super Duty

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ford F250 Super Duty and F350 Super Duty.
Check Stock