Top Protective Relays

Bosch 0332002156 Normal Open Power Relays - 12 V, 75 A

  • [BOSCH EXPERTISE] - Bosch has been producing relays for vehicles and other applications for more than 40 years - this vast development experience ensures continuous advancement in design features to deliver optimum performance.
  • [HIGH CAPACITY] - Bosch Power Relays feature a robust design and enhanced capability to perform switching operations in high demand applications like engines, starters, and other large products.
  • [PREMIUM PERFORMANCE] - Bosch relays incorporate only the highest quality materials for superior performance and a 250,000 switching cycle capability.
  • [SUPERIOR ENGINEERING] - Superior engineering provides vibration, shock, and high temperature resistance that ensures enhanced reliability and a long service life.
Check Stock

Glarks 10 Pack 12V 30/40 Amp 5-Pin SPDT Electrical Relays Switch for Automotive Truck Boat Marine

  • ★ Package: Including 10 pack 5-Pin SPDT(Single Pole Double Throw) Electrical Relays Switch packed in a plastic box..
  • ★ Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87)..
  • ★ These Relays are Interchangeable/Compatible with: All automobiles and devices equipped with a 12 Volt DC power source..
  • ★ Application: These relays have a universal application and can be used in automotive setups, car sound systems, security systems, and various other applications..
Check Stock

PiRelay EXPANSION BOARD FOR RASPBERRY PI Raspberry Pi A+/B+/2B/3B/3B+ Loads up to 240VAC/7A,125VDC/10A by SB Components

  • Supports Raspberry Pi 3,2,A+/B+, Zero, Zero W 4 Relay control more High-quality.
  • Quality relays loads up to 240VAC/7A, 125VDC/10A Onboard LEDs for indicating relays status.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins Comes with development resources, including examples in python.
  • Control through PiRelay app on Andriod. best used with PiTalk.
Check Stock

WJSKDQ Universal 12V Car Automatic Antenna Kit Signal Amplifier Retractable Car Radio Antenna Accessories

  • 1 retch length: 39”, protective bottom plate: 12”, wire length: 47”, cable: 75 ohms cables..
  • 2 Built-in superior quality micro relays, 3C-2V coaxial cable.Long life time--the service life of more than 50,000 times greater than the top edge 4KG..
  • 3 Fully Automatic when you connect it to the power cable.Signal receive--Stainless steel mast..
  • 4A good acceptable performance electric retractable Signal Amplifier Retractable. waterproof performance, low noise.
  • 5 Material:stainless steel； voltage range: DC10-14V,Current: 0.7±0.2A；working voltage : DC12V.
Check Stock

waveshare Raspberry Pi Power Relay Board Expansion Board Module Three Channel(3-ch) for Raspberry Pi A+/B+/2B/3B/3B+/4B Loads up to 250VAC/5A,30VDC/5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
  • Onboard LEDs for indicating relays status.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins.
Check Stock

Nilight 90017C 3 Gang Aluminum Panel Toggle Dash 5 Pin On/Off Pre-Wired Rocker Switch Holder for Automotive Car Marine Boat, 2 Years Warranty

  • 40A/30A High Switching Capability. These relays have a universal application and can be used in automotive setups, car sound systems, security systems, and various other applications..
  • Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
  • These Relays are Interchangeable/Compatible with: All automobiles and devices equipped with a 12-14 Volt DC power source.
  • Package includes: 10 pack electrical relays.
Check Stock

6 Way Blade Fuse Holder Box,12-Slot Relay Box with Spade Terminals and fuses,6PCS 4Pin 12V 40A relays for car Truck Trailer and Boat

  • 6-way fuse box 6-relay holder with spade terminals and 6pcs fuse, 6PCS 4Pin 12V 40A relays(5PCS 4Pin 12V 40A Relays,1PC RTT7121 4-Pin 12V 40A relay).
  • Suitable for all marine, motor-home, automotive & motorsport applications..
  • Waterproof connector.Can be installed in circuit..
  • Can be fixed through 2 pre moulded holes on side..
  • Package Includes:1 Piece Relay Holder Box with fuses 4-pin relays and 36 Pieces Pins terminals..
Check Stock

Ingcool Compatible with Raspberry Pi Expansion Board Power Relay Module Kits for Raspberry Pi 4B/3B+/3B/2B/ A+/B+ 5A 250V AC/ 5A 30V DV

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.Photo coupling isolation, prevent interference from high voltage circuit.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins.Onboard LEDs for indicating relays status.
  • Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835.
Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

  • 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
  • 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
  • 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
  • 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
  • control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
  • 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..
Check Stock

MPC Emergency Manual Release Kit for Shaved Doors/Door Poppers

  • Built-in Relays - The new control module has built-in relays which eliminates 90% of wiring for a cleaner, faster, simplified installation. This system will shave AT LEAST an hour off the install time.
  • Single wire connections: No need to buy extra wire or make splice connections. Our new control module includes a wiring harness w/1 WIRE to run to each side of the vehicle & connect to the solenoid.
  • Programmable Safety Feature - To prevent accidents, our new control module automatically disables the door popper system if it sense that the vehicle is running.
  • Redesigned Remotes - Sleek two-button design w/a sliding cover to prevent accidental door opening while the remote is in your pockets. Press both buttons at the same time for optional trunk release!.
  • (2) Heavy-duty solenoids (45 lb. max pulling force), (2) chrome door poppers, RC receiver w/built-in relays per door, (2) 2-button 3 transmitters, (2) push buttons, steel linkage cable.
Check Stock

10 Pieces Refrigerator Starters QP2-4R7 4.7 Ohm 1 Pin Refrigerator PTC Starter Relays and 6750C-0005P Refrigerator Overload Protectors Refrigerator Parts Accessories

  • Package content: there are 5 pieces of 4.7 ohm 1-pin PTC starting relays and 5 pieces of 750C-0005P refrigerator overload protectors in the package,....
  • Compatible models: refrigerator overload protectors can effectively prevent the compressor in the refrigerator from overheating, they can be effective....
  • PTC starting relay: the PTC starter relay is a universal starter relay, applied in various brands of mini refrigerators and coolers.
  • Easy to install: the refrigerator start relays are durable, reliable and not easy to rust thanks to plastic and brass materials.
  • Wide applications: the 4.7 ohm 1-pin PTC start relays and 6750C-0005P refrigerator overload protectors are compatible with most mini refrigerators,....
Check Stock

HELLA H84709011 Mini\280\ Weatherproof Relay Connector Kit

  • Weatherproof Mini "280" relay connector kit..
  • Fits any automotive industry standard Mini "280" weatherproof relays regardless of manufacturer. Hella mating relays include 931410087, 931410082, 931410057, 931410917..
  • Kit includes plastic connector housing, external housing seal, (7) 6. 3 mm locking terminals, (6) various wire seals..
  • Package dimensions:5.91" (L) x 3.62" (W) x 1.94" (H).
Check Stock