Top Ptfe Fiber

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Plackers Gentleslide Dental Flossers, Mint Blast Flavor, Gentle Clean, Soft Floss with Superior Strength, Built-in Tartar Pick, 90 Count

  • Ideal Floss for Tight Teeth: Includes 90 dental flossers specially designed to slide smoothly between teeth.
  • Soft PTFE fiber: Hi-Performance fiber slides smoothly between tight teeth, giving you the access to teeth in hard-to-reach areas to remove plaque and debris.
  • Fresh Breath: Enhance your oral hygiene routine with our dental flosser picks by enjoying delicious mint blast flavored dental floss that freshens breath fast!.
  • Toothpick: Dental toothpick helps remove plaque from tight spaces, allowing you to reach and clean those hard-to-access areas between your teeth and gums.
  • Easy Storage: Our Plackers dental flosser picks arrive in a re-sealable bag for easy and convenient on-the-go or at home storage, making your life simpler.
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock

Thorlos VCMU Max Cushion Edge Court Low Cut Socks White Extra Large

  • Represents the highest level of performance court socks.
  • Constructed with NANOGLIDE, a PTFE treated fiber that virtually eliminates friction on the skin for people who suffer from blistering or hot spots.
  • NANOGLIDE fibers are lighter, stronger, and posses exceptional moisture wicking properties.
  • Features Thorlo legendary padding in the heel, forefoot, sidewalls, and over the toes to protect against the forces inside your shoe.
  • Targeted compression in the arch and ankle area provide exceptional support and holds sock in place.
Check Stock

Smelting Pot

  • All In All: The complete set covers all of the basics, includes Furnace, burner, gas hose with regulator, 6KG crucible, fire pad, tongs, PTFE tape, manual, worry-free 12-month warranty, technical support 24 hrs..
  • No Rust At All: Heavy Duty stainless steel 304 furnace body, Anti-rust, corrosion resistance, durable..
  • Reach High Temperatures Quickly: Heavy Duty stainless steel 304 gas burner offers 135,000 BTU output, heat up to 2600°F/1426°C, melt copper wire in 15 minutes..
  • Pro Heat Insulation: Built-in ceramic fiber heat insulation Thickness up to 25mm, Excellent heat insulation effect..
  • Safety: Come with CSA gas hose and 30 psi regulator, professional design for working with America standard Propane Tank directly, Easy to use.(It does not work with BBQ low pressure gas tank fitting).
Check Stock

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • [Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
  • [Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
  • [Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
  • [Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
  • [Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

ADVANGENE Syringe Filter Sterile, PES, 0.22um, 13mm (75/pk)

  • HYDROPHOBIC PTFE SYRINGE FILTERS - Virgin PP housing with Hydrophobic PTFE membrane. Diameter: 13mm, Pore Size: 0.22μm, 100Pcs..
  • UNIFORM PORE SIZE - PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
  • PREMIUM PERFERMANCE - It Can be autoclave, sterilize at 121°C/249.8℉ for 45 minutes, it with broad chemical compatibility and strong chemical stability and inertia..
  • STURDY & DRUABLE - The syringe filters fit well, securely and durable, have reasonable flow for the filtration size, PTFE syringe filters are wall marked, when working with different requirements for filtration to be able to quickly discern which ones are being used..
  • APPLICATION WIDELY - PTFE Syringe filters are broadly used infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions, perfect for hydrophobic, even such as culture medium, liquid cultures and grain spawn jars..
Check Stock

uxcell PTFE Ball, 22mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 22mm/0.87-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 36mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • PTFE Ball: 36mm/1.42-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 19mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 19mm/0.75-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 25mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 25mm/0.98-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock