Top Pvc Pipe Inch To Inch

CIRCOPACK UTILITY Grade 2 Inch 4-Way PVC Fitting Connectors For Use With Schedule 40, 2 Inch PVC Pipes (2 Pieces)

  • These are for use with Schedule 40, 2 inch pipes. Do note that Schedule 40, 2 inch PVC pipe has an Outer Diameter of 2.375 inches..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4-way corner fitting is commonly used to building the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings..
  • Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • These unprinted UTILITY grade fittings are an affordable alternative to the high gloss, high price, furniture quality PVC fittings..
  • This is a CIRCOPACK brand 2 piece value bundle. Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product. CIRCOPACK is a Value Emporium brand..
Check Stock

Cleveland Tubing Perforated Corrugated Expandable Flexible Landscape Drain Pipe, 4-in. by 12-ft.

  • Pipe unfolds and expands from 15-inches to 12-feet.
  • Perforated pipe is for ground water drainage (French drains, dispersing water from flower beds) where soil is coarse.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover Furnace & Roof Vent Cap Stainless Steel Wire Round Exhaust Pipe Cover End 3 Inner & 3.5 Outer Diameter

  • ATTENTION: Please Read: the inner diameter measures 3" inch and the outer diameter measures 3.5" inch, therefore any pipe connected with mesh pipe....
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent....
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or....
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves,....
  • AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows maximum airflow for the furnace work through the mesh....
Check Stock

15Pack 3/4Inch 4 Way PVC Fittings, Heavy Duty PVC Elbow Side Outlet Tees, Furniture PVC Tee Corner Fittings for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • 4 Way PVC Fittings——The PVC Elbow are made Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building PVC furniture, such as dog beds and garden project.
  • 3/4Inch PVC Elbow Fittings——Package include 15pcs 3/4inch PVC connectors, fits externally over 3/4” size PVC pipe, which has actual OD 1-1/16” or 1.050” and an inside diameter of 3/4”(Sch.40 or Sch.80 PVC pipe.
  • Professional Performance 4-way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

Flex-Drain 51910 Flexible/Expandable Landscaping Drain Pipe, Perforated, 4-Inch by 12-Feet

  • Pipe unfolds and expands from 15-inches to 12-feet.
  • Perforated pipe is for ground water drainage (French drains, dispersing water from flower beds) where soil is coarse.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.
Check Stock

The Purge

  • 94-Percent Energy efficient with stainless-steel condensing heat exchanger.
  • Intelligent electronic controls designed to increase energy efficiency and safety.
  • Up to 38-Feet of 3-Inch PVC Pipe or 5-Feet of 2-Inch PVC Pipe.
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool & WORKPRO 25FT Tape Measure

  • WORKPRO Ratchet PVC Pipe Cutter Tool - The pipe cutter is made of durable hardness aluminum alloy steel with high hardness, good toughness and high strength. The blade is made of 5Cr15MoV, which is not easy to rust, bend and break, and can cut the pipe evenly and accurately, not easy to deviate.
  • WORKPRO Ratchet PVC Pipe Cutter Tool - Ratchet PVC Cutter is designed to OD up to 2-1/2"(63mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
  • WORKPRO Ratchet PVC Pipe Cutter Tool - The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
  • WORKPRO 25FT Tape Measure - The design of wrist strap and belt clip makes the tape measure easy to carry in various occasions.When your hands are not free, you can hang it around your waist or tie it around your wrist. Of course, the design of the s....
Check Stock

Flex-Drain 51710 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 12-Feet by Flex-Drain

  • Pipe unfolds and expands from 4 to 50-feet.
  • Solid pipe helps move water from one point to another.
  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC.
  • 30-Percent higher load-bearing rating than standard corrugated pipe.Maximum working pressure (psi):70.
Check Stock

(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings

  • COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
  • ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
  • TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
  • 3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
  • MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Check Stock

Blue 2\ x 100' Pool Pump Water PVC Hose - Backwash Filter Discharge Drain Hose - Blue Lay Flat Trash Pump Rubber Hose

  • Male coupling - Aluminum 2 inch Pipe Thread (NPT).
  • Female Coupling - Brass 2 inch Straight Pipe Thread (NPSH) With Gasket.
  • The Female Coupling Will Only Connect To A Male 2 inch NPT PVC Pipe, Pool Pump or Metal Pipe.
Check Stock

Rheem RTGH-95DVLN 9.5 GPM Indoor Direct Vent Tankless Natural Gas Water Heater

  • 94-Percent Energy efficient with stainless-steel condensing heat exchanger.
  • Intelligent electronic controls designed to increase energy efficiency and safety.
  • Up to 38-Feet of 3-Inch PVC Pipe or 5-Feet of 2-Inch PVC Pipe.
Check Stock