Top Quality Extruder

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....
Check Stock

3D Printer 3 in 1 Out Multi-Color Extruder Three Colors Switching Hotend Compatible with Titan Extruder and Bulldog Bowden Extruder 1.75mm

  • Thermistor:100K NTC 3950, main heat sink block 60*27*27mm.
  • This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for....
  • Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended).
  • Color switching is fast and stable, without significant print quality defects..
  • Firmware modification is simple, easy to use.
Check Stock

Bowden Extruder V2.0 DDB Universal Geared Extruder Dual Drive Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gear and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.0....
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running....
  • Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Befenybay Upgrade Direct Dual Gear Extruder Support Kit Easy Print Flexible Filament for Creality Ender 5 /Ender 5 Pro/Ender 5 Plus 3D Printer Plate +Dual Gear

  • 【Material】Plate is made of high quality cold rolled sheet material.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 5 /Ender 5 Pro /Ender 5 Plus 3d printer upgrade direct dual gear extruder.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 4pcs pulleys, 1pcs length 60cm motor extension cable(one end is female and the other is....
Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

  • 【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....
Check Stock

Creality Official Ender 3 Aluminum Extruder 3D Printer Ender 3 Extruder CR-10 Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series Creality CR-10 Series Ender 5 Series

  • UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S,....
  • STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws....
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used....
  • ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve....
  • Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence..
Check Stock

IdeaFormer-3D 3D Printer Upgraded Extruder Replacement Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • Material: Aluminum alloy. The CR10 extruder kit made of aluminum alloy material is more stable and durable during working than the original plastic.....
  • Upgraded: Our improved extruder kit has an adjustable bolt, which has a stronger pressure to push the filament into the printer nozzle and makes....
  • Easy Installation: The extruder hotend includes all the necessary screws & parts, you just need to remove the original extruder and install the new....
  • Application: This extruder feeder drive is compatible with CR10 3D printers. No need to change stepper motors or other mounting hardware. Compatible....
  • After-sales Service: If you have any problems with our product, please feel free to contact us. We will offer professional technical support to you..
Check Stock

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

  • Compatible Models: This Extruder Motor kit is compatible with Creality 3D printers Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10/CR-10S and etc..
  • All-metal Extruder -- Stronger extrusion force with stable performance.
  • metal extruder with high quality aluminum alloy has stronger extrusion force,....
  • Smoothly and precisely -- The extrusion gear with high density is closely matched with U-shaped bearing. The even extrusion forces avoids the slippage....
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
Check Stock

FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm

  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity..
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!.
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality..
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints..
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production dem....
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Shimpo Handheld Extruder

  • Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
  • The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
  • Hollow die set available Product number: H-EXTRD-HDS.
  • The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
  • Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.
Check Stock