Top Quick Disconnect Gas Line

Performance Tool W89330 Fuel And Transmission Line Disconnect Set, 7-Piece

  • Color coded anodized aluminum fuel line disconnect tools.
  • Transmission cooler line disconnect tool.
  • Ford and Mercury transmission cooler line disconnect tool.
  • Ford, Chrysler and GM quick disconnect tool.
  • Ford, Chrysler and GM quick disconnect tool..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

DOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance

  • 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
  • Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
  • Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
  • 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
  • Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check Stock

Fuel Line Disconnect Tool Set, 22pcs Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line, Includes Scissor Type Remover, Compatible with GM Ford Chevy Models

  • 22pcs Master Quick Disconnect Tool Kit for separating automotive ac hose and fuel lines, suitable for a wide variety of domestic and foreign automotive..
  • The fuel line disconnect tool set is used for most fuel lines, air conditioning lines, radiator and heater hoses, simple push-on & pull-off action, popular sizes 3/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch and 7/8 inch ..
  • The fuel line disconnect tool kit is made of aluminum alloy and plastic steel,and this 22pcs fuel air conditioning line disconnect set can stand up to years of use..
  • The master quick disconnect tool kit for automotive ac fuel line,offset for hard-to-reach areas, fits 5/16 inch , 1/2 inch , 3/8 inch , 5/8 inch , 3/4 inch , 7/8 inch ,4 colored quick ac fuel line quick disconnector 3/8 inch , 1/2 inch , 5/8 inch & 3/4 inch ..
  • Our transmission line disconnect tool for Ford comes with a heavy-duty blow-molded carrying case,helps to protect and store various parts conveniently.High quality products, 100 percent new.If there is any problem in the process of purchase or use, please contact us to solve i....
Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

  • Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
  • Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
  • SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
  • What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
  • Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..
Check Stock

Lisle 39210 Main Fuel Line Disconnect

  • GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
  • FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment.
  • EASY TO USE: Each fuel tool is color-coded by size for easy identification.
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
  • BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
  • PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).
Check Stock

Pin-Lock MFL Dis-connect Set with Swivel Nuts 2 5/16 Gas 1/4 Liquid Barbed by PERA

  • 1.Include: Pin Lock Gas Disconnect MFL, Pin Lock Liquid Disconnect MFL, Swivel Nuts 1/4 for Liquid, 5/16 for Gas.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Adapters.
  • 3.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 4.Connect: The 1/4 Swivel Nut Barb is on the Liquid Side and connect to the Common 1/4" Liquid Hose, The 5/16 Swivel Nut Barb is on the Gas Side and....
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock

2 Pack 1/2 barb Hose Home Brewing 304 Stainless Steel Female Quick Disconnect Mash Tun wort chiller Beer Brewing Connector brewing equipment 1/2 female barb

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve,wort chillers,beer....
  • 【Push-On Hose Fittings 】Firstly you need to push a lever on barbed quick disconnect .And then take the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside.It will create liquid & gas tight seals between FPT fitting and the barbed....
  • 【Connection Made Easy】This quick disconnect set can take one hand to take on or off. Their parts fit together very well . The FPT quick disconnect....
Check Stock

DOZYANT 1/4 inch RV Quick Connect Adapter Conversion Fitting for Blackstone Tabletop Grill - 17 Inch and 22 Inch Portable Gas Griddle

  • This conversion fitting only fit for Blackstone 17 Inch and 22 Inch table top griddle.
  • Converts a Blackstone 17" and 22" gas griddle to allow connection to the low pressure system on a Travel Trailer or Camper with 1/4" quick plug.
  • 1/4'' male quick connect / disconnect plug to hook direct to low pressure line on RV trailer.
  • This conversion still allows connection with the original regulator to also be able to use 1LB disposable propane bottles.
  • Don't use grill with HIGH PRESSURE GAS once the pressure regulator is remove.
Check Stock

AutoXscan AC Disconnect Fuel Line Disconnect Tool Set – Fuel Line Tool Fuel Line Removal Tool 7pcs Kit 1/4-7/8 inch

  • Suitable for : Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment..
  • Package contains (7) fuel line pliers transmission tools:1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
  • AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines..
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” so easily to use..
  • Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released..
Check Stock

Dynamic FLK-38 Automotive Replacement Fuel Line Repair Kit 3/8 in (10mm), 23 Pack , Black

  • Save Time and Money with the Dynamic FLK-38 3/8" Nylon or Steel Fuel Line Repair Kit.
  • QTY 2, 3/8" NYLON TO STEEL COMPRESSION UNIOn.
  • QTY 2, 3/8" QUICK DISCONNECT TO STEEL TO NYLON.
Check Stock

25PCS Fuel Line Disconnect Tool Set & Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects，Compatible with Most Ford Chevy GM Models,Blue

  • [WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for most fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action. Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
  • [DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
  • [DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
  • [HANDY DESIGN & EASY STORAGE]--All cooler line removers are set in unique and organized locations in a blow-molded case for avoiding misplacing your tools between uses, while the outside handy c....
Check Stock