Top Quick fit Conduit Reducing Fittings

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....

Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling.
Resists Crushing and Stretching,Outdoor Sunlight Resistant.
Integral Rigid and Flexible PVC Construction, UL Rating 140 degrees F.
Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.

Exposed Reaming Handles - Up to 1-Inch Conduit (Patent Pending).
Reaming Head Design - Smooths out rough edges of up to 1-1/2-Inch Pipe (Patent Pending).
Quick Adjust Jaws - V-groove jaws create a more precise fit with up to 1-1/2-Inch Jaw Capacity.
Forged Alloy Steel - For Maximum Tool Strength.
Rust Protection - Increases tool life by reducing corrosion.

Reamer's hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings.
Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of....
Reams both the inside and outside of the conduit at the same time.
Longer Cushion-Grip handle provides comfort and more torque for reaming.

SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
remove using a disconnect clip or disconnect tongs.
VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
suitable for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.

SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
approved for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.

...s of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..