Top Quick install Fitting

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

  • 【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
  • 【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
  • 【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
  • 【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..
Check Stock

JOEJET Pressure Washer Adapter Set, M22 to 3/8'' Quick Connect for Pressure Washer Hose, M22 14mm to M22 Metric Fitting, 5000 PSI

  • ATTENTION: M22 14mm quick connect’s INSIDE DIAMETER IS 14mm, NOT 15mm!!! It may cause leakage when your fitting’s 15mm. Pressure washer adapter not fit electric brand pressure washer with M22 15mm fitting..
  • UPGRADE MATERIAL: Unlike other pressure washer quick connect, pressure washer quick connect 3/8 is made of brass and stainless steel. Not only can be anti-rust, extend the service life, but also plays a decorative role..
  • EASY to INSTALL: According to connection map, pressure washer quick disconnect is easy to connect and disconnect. you only need to connect pressure washer hose adapter correctly, and then you can apply it to your pressure washer. Saving your lots of time. If you not sure your pressure washer needs M22 15mm or M22 14mm fitting, please contact with us..
  • WIDELY FUNCTION:3/8 quick connect pressure washer’s max working pressure’s 5000 PSI, and apply on most pressure washer gun, pressure washer pump and pressure washer hose..
  • GREAT SERVICE: JOEJET focuses on customer shopping experience and continuously improves the quality of service. If you have any questions or problems, please contact us, we will solve the problem for you within 24h..
Check Stock

Air Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI

  • QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
  • VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
  • COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
  • EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
  • AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

NU Aqua Ice Maker and Refrigerator Connection Kit For Reverse Osmosis Filtration System

  • COMPATIBILITY: Works with NU Aqua Platinum Series and most standard under sink reverse osmosis systems using 1/4” tubing. Multiple uses such as ice makers, water coolers, dispensers, humidifiers, refrigerators and many more.
  • EASY INSTALLATION: Featuring quick connect fittings your fridge will produce crystal clear, clean and great tasting ice within less than 30 minutes. Easy to use push-in fittings require no hand tools for installation.
  • INCREASES RO SYSTEM BENEFITS: Not only will your reverse osmosis system produce drinking water it will now be connected to your ice maker so that you can have great tasting ice. The provided T fitting allows the system to function for both application with no loss in performance..
  • HIGH QUALITY COMPONENTS: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience.
  • KIT INCLUDES: 1x 16FT 1/4” white tubing, 1x 1/4” x 1/4” x 1/4” T valve, 1x 1/4” x 1/4” Inline shut off valve, 1x compression fitting set.
Check Stock

Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor

  • 【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
  • 【Wildly Application】 Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..
Check Stock

Aupoko R12 R22 to R134a Adapters, R134A Refrigerant Tank Adapter Kit with Valve Core Remover, 1/4' Male to 1/2' Female, 1/4’’ SAE Female X 1/2’’ Male Refrigerant Tank Adapters

  • ★ FITMENT ---- R134A to R12 fitting adapter refrigerant tank, perfect fit for air conditioning refrigerant system..
  • ★ PREMIUM QUALITY ---- The R134A brass vacuum pump adapter is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ EASY INSTALLATION ---- R134A adapter is quick and easy to install, secure fitting, no-leak connection..
  • ★ DIMENSION ---- 1/4" Male to 1/2" Female, 1/4’’ SAE Female X 1/2’’ ACME Male R134A adapter fitting with valve core..
  • ★ 1 YEAR WARRANTY ---- Order r134a adapter fitting from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Beduan Water Push to Connect Quick Connect Fitting 3/8\ Tube OD for RO Water Reverse Osmosis System Water Tube Fitting (Ball Valve + T + L + I Combe, Pack of 16)

  • No tools required, easy to install, quick connect fitting..
  • Mini quick connect push 3/8-Inch tube OD.
  • Standard fitting for water filter systems and RO Water System using 1/4" water filter tubing.
  • Provides a permanent/removable leak-proof connection.
  • Suitable for water and food applications.
Check Stock

Malida 1/2\ Thread Male to 1/4\ Push Fit Tube Quick Connect for Water Purifiers Reverse Osmosis (5pack)

  • Product Name: Straight 1/2“Npt to 1/4" Tube OD Push-in Connect Fittings,1/2" Male Thread Connector Adapter..
  • Easy Installation: New generation Non-Locking Clip technology offers an easy Diy Installation Without Tools Required, Just Push In to Connect..
  • Package Included: 1/2"Npt to 1/4" Tube OD Push To Connect Fitting,5 pcs..
  • Applications Include RO System Beverage Dispensing Refrigerator Ice Maker Coffee Machine etc..
  • Size&Tube Compatible With:1/4 inch Quick Connect fitting Size,Fits standard 1/4 od Tubing Used On Most Water Purification Systems..
Check Stock

Redneck Convent Boat Motor Flusher Round Circular Cup Muff Plunger with Hose Fitting Flush Kit – Marine Inboard Engine Flushing

  • INBOARD FLUSHER: Use the Redneck Convent Boat Motor Flusher Round Circular Cup Muff Plunger with Hose Fitting Flush Kit – Marine Inboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your inboard boat engine with through hull water intakes when hooked up to a garden hose.
  • Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
  • EASY INSTALLATION: Requires no tools for installation or removal and perfect for hard-to-reach areas.
  • Simply twist on to attach to your intake and connect your garden hose to the included quick connect fitting to run motor out of the water or use to winterize motor.
  • Never turn water supply to full force or damage to drive may occur.
  • FITS YOUR BOAT: Fully adjustable and compatible with inboard engines with through hull water intakes.
  • As long as your boat includes a water pick-up on the bottom of the boat, this flusher is for you.
  • Make sure the boat intake scoop is less than 5 inches (12.7cm) and you have enough clearance under your trailer.
  • NO LEAKAGE: Round (circular) cup is easy to put on and provides maximum water flow while allowing zero leakage once you start the engine.
  • Cup dimensions 5.6-inch outer diameter (OD), 4.9-inc....
Check Stock

PureSec RO Fittings Y Type 1/4 inch Tubing OD Use Two Way Water Line Splitter Quick Connect Tube Fittings Push to Connect Plastic Connectors for Water Filtration System(Pack of 10)

  • ★WATER&FOOD USE MATERIALS: Our fitting/adapter is made from safe,non-toxic materials.They are widely used for RO system,plumbing or drip irrigation System etc.
  • ★SIZE&TUBE COMPATIBLE WITH: 1/4 inch by 1/4 inch by 1/4 inch.
  • Fits standard 1/4 inch O.D. water line used on most Water purification systems ( check your tube size carefully before order).
  • ★EASY INSTALLATION: New generation Non-Locking Clip technology offers an easy DIY installation without tools required, Just Push in to Connect..
  • ★FUNCTION&QUALITY: Quick connect fittings are used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or compression connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality..
  • ★Notes: Our fitting is reusable, it can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)..
Check Stock