Top Rapid Prototyping

3Pcs ESP8266 ESP-12E,Aideepen NodeMCU ESP8266 30PIN ESP-12E Development Board Wi Fi WLAN WL Module CP2102 for NodeMCU for ESP-12E for Arduin0

  • 【ESP8266】This is ESP8266 V2 Nodemcu Lua development board,works great with the latest Compatible with Arduin IDE/Mongoose IoT/Micropython..
  • 【30PIN】ESP8266 CP2102 chip.it's easy to program,without having to press the flash and reset buttons before each flash operation..
  • 【NodeMcu】NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • 【Easy】The ESP8266 has powerful on-board processing and storage capabilities.and has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board very easy to use..
  • 【Why choose us】You can use it with our development board ASIN B0B85C98FX,to make your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us..
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • ... lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

Kreg Tool Company V09-DVD Kreg DVD-Router Table Tips and Tricks with Mark Eaton

  • ...e even in bright sunlight, vastly improving environmental adaptability.“Blackness” or “brightness” is no longer challenging. It also can easily scan black objects..
  • Wide Range of Applications - Lizard ease of use, speed and precision has made it an essential product for a wide range of industries. From rapid prototyping to quality control, it can scan the widest range of objects in the industry. Such as Cultural Relics, Reverse Engineering, Daily Goods, Medical Science, E-commerce..
  • One-click Model Optimization - Easy to Use. Bid farewell to the complexity of scanning data processing in different software. The collected spatial coordinates are automatically filled and repaired /substrate recognition/lossless mesh simplification/smooth denoising by the processing software，generate a fine and complete 3D scan file. Export to STL,PLY or OBJ file format, compatible with FDM and light curing 3D printers..
Check Stock

REXQualis 840 Pieces Breadboard Jumper Wire Kit with 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package Includes: Contains 840 pieces U shape preformed breadboard jumper wires, 6 individual clamshell containers each holding 140 pieces jumper....
  • 14 Different Lengths: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm, meet your various experimental....
  • Easy to Use: Each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard, make prototyping on a breadboard....
  • Wide Application: with variety of sizes and color design, these breadboards wires are ideal for use with any breadboard, prototyping, prototype....
  • We have always cared about the customer experience and improve the product function details, and also provide quick-responding technical support..
Check Stock

Jameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 2390-Point Solderless Breadboard 6.9 L x 5.8 W 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-206-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

JAMECO VALUEPRO - WBU-204-R Jameco Valuepro 1660-Point Solderless Breadboard 6.5 L x 4.3 W 0.1 spread Ideal for Prototyping and Classroom Projects - 20774

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing..
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

TORRAS Magnetic Slim Fit for iPhone 14 Pro Case Green, [Ultra Thin as No Case] [Compatible with MagSafe] Anti-Scratch Plastic Cover for iPhone 14 Pro Phone Case, Alpine Green

  • ... [ Ultra-Thin & Sturdy ] This is the thinnest iPhone 14 Pro case on the market. It almost has no burden, greatly maintaining the minimalist design of the iPhone 14 Pro, you feel barely using a case. The unbreakable 4-layer structure makes it slimmer yet sturdier via rapid prototyping under high temperature and high pressure..
  • [ Bare iPhone Grip & Velvety Feel ] The advanced Nano-coating technology provides an excellent velvety feel and easy to hold. The thinness is just right and provides the same grip as the bare iphone. Differing from silicone cases, this gold iPhone 14 pro case won't pick up lint, fuzzes, or rip.
  • [ Raised Screen & Camera Protection ] The iPhone 14 pro case gold offers minimal bulkiness yet maximum protection. Both 1.0 mm raised screen edges and 1.2 mm raised camera bezels to protect the lips from any potential scratches or dents, and provide strong protection if the phone does fall.
Check Stock