Top Raspberry Pi 3 Case For Cooling

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)

  • Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
  • Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
  • Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
  • With Quiet Cooling Fan, it can drop the temps for your Pi.
  • Include Raspberry Pi Heatsink, Better Cooling Experience.
Check Stock

Raspberry Pi 4 Cluster Case, iUniker Raspberry Pi 4 Case with Cooling Fan and Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, 3 B+, Pi 3 B, Pi 2 B, Pi B+ (4-Layers)

  • Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
  • Compatible With Current Raspberry Pi's including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
  • Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
  • With Quiet Cooling Fan, it can drop the temps for your Pi.
  • Include Raspberry Pi Heatsink, Better Cooling Experience.
Check Stock

Treedix 3.5 inch TFT Touch Screen Module 320x480 Resolution LCD Display Compatible with Raspberry Pi 4B/3B/3B+ with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry Pi 4B

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. The ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch LCD touch screen has 480 x 320 resolution, with resistive touch control.
  • The LCD touch screen can use GPIO interface for power supply.
  • The LCD screen has a 2-pin interafce for connecting the cooling fan, which can allow the screen and cooling fan both working at the same time..
  • The LCD touch screen is suitable for Raspberry Pi 4B/ 3B/ 3B+ versions. When used for Pi 4B, it can support for Raspbian system, for kali Linux system. When used for 3B/3B+, it can support for Raspbian system, for ubuntu system ,for kali Linux system..
  • The case features an easy-to-install split design that protects your PI computer and screen, as well as a cooling fan mounted on an aluminum stand and a hot silicon pad for cooling the chip to keep the PI computer and screen cool..
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Pi 4B Case with Quiet Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB - Black

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal.
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

  • Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock

Raspberry Pi 3 Armor Case, Raspberry Pi Metal Case with Passive Cooling/Shell Heat Dissipation for Raspberry Pi 3B+/3B

  • ✔ Passive Cooling with housing heat dissipation design, With thermal tapes to tightly touch with on-board Raspberry Pi 3 chipset, No more overheating problem..
  • ✔ Silence without noise with great cooling performance, it can drop temp up to 30-37 ℃..
  • ✔ All ports and slots of the case can match with Raspberry Pi 3 Model B+ /Raspberry Pi 3 Model B perfectly..
  • ✔ Smooth and straight aluminum alloy material, ultra-thin design & easy to install..
  • ✔ Note: There are 4pcs Thermal Tape in the packing. For Raspberry pi 3B+, you just need one big Thermal Tape.
  • For Raspberry Pi 3B, you need two big Thermal Tapes..
Check Stock

GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)

  • Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Check Stock

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes heatsinks for cooling down your Raspberry Pi better..
  • The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
  • Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
Check Stock