Top Rc B6 Charger

FCONEGY B6 Lipo Battery Charger 80W 6A RC Battery Pack Balance Charger Discharger for NiMH/NiCd,LiPo/Li-ion Battery,with LCD Display,AC Power Supply

  • 【Multiple Battery Compatibility】This B6 charger can charge a variety of rechargeable batteries, including NiCd/NiMH batteries, Li-ion batteries, LiPo batteries, LiFe batteries.This is a multifunctional charger to solve your charging troubles,you only need this one charger can meet your charging needs for different batteries..
  • 【Multifunctional Charger】In addition to charging the battery, this charger is also equipped with balance battery function. You don't need to adjust the voltage and current, just choose the battery type that suits you. It also has fast and storage charging functions, data storage and loading functions, and cyclic charging and discharging functions..
  • 【LCD Display-Easy to Read】The B6 charger has an LCD display, you can view all charging status and settings on the charger LCD screen when you browse the mode and select. To facilitate you to choose the mode you need..
  • 【High-quality and safety】B6 charger is made of high-quality chips and materials to provide you with high-quality products and function performance, This charger also has short-circuit protection, overcharged protection, overcurrent protection and overheat protection. Make sure operating safety..
  • 【Easy To Use】Press the "Batt type" button to enter user sett....
Check Stock

Blomiky 2 Pack 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for Old Version UDI001 UDI008 UDI009 and HJ808 RC Boat Battery UDI001 USB 2

  • SM-4P Connector Plug, Only in RC Boat Battery which use same SM-4P plug. When put in plug convex side on above,flat side on below., first and third pin is positive, second and forth pin is negative. please make sure your battery is same. don't reversed..
  • USB charger cable built-in over-charged IC circuit protection,Red ligth is solid when charging, change to green light solid after full charged. 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for Old Version UDIRC UDI001 UDI008 RC Boat.
  • 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for Altair AA102 Big size Red RC Boat and Altair MidSize AA Wave RC Remote Control Boat Yellow colour,.
  • 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for batttery fit for DEERC 2008 RC Boat Remote Control Boat with LED Light and HONGXUNJIE HJ808 Red and Blue 2.4Ghz RC Boat.
  • 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug fit for Cheerwing Venom Black orange RC Boat Remote Control Boat battery..
Check Stock

Tenergy 7.2V Battery Pack for RC Car 3800mAh NiMH Flat Battery Packs 2-Pack w/Standard Tamiya Connector+6V-12V Universal Battery Charger for NiMH/NiCd Battery Packs for RC Hobbies Airsoft Guns

  • Pair with popular 7.2V RCs - Use Tenergy replacement RC battery for radio controlled brands and hobbies with RC cars, RC tanks, RC trucks, RC boats....
  • The Tenergy 7.2V NiMH Battery Pack has a high capacity rating of 3800mAh that can run your RC car and related applications much longer than NiCd....
  • Hobby battery charger - Tenergy universal charger is great for most RC hobbies and airsoft guns because it has a standard Tamiya connector, standard....
  • Quick charge - Select between 1 Amp (recommended for 1000-1800mAh packs) or 2 Amps (recommended for packs over 2000mAh) on the RC battery charger to....
  • The RC racing battery made of Sub C NiMH battery cells, each replacement hobby battery dimensions are 5.39" (length), 1.87" (width), 0.95" (height)....
Check Stock

RC Battery Charger for 4.8V 7.2V 8.4V 9.6V NiMH/NiCD Battery Pack, RC Car Charger for Traxxas Battery 2.4V-12V Battery Pack, 2-10

  • SMART UNIVERSAL BATTERY CHARGER- Charges the NiMH/NiCd battery pack of 2-10 cells(2.4V,3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V,12V). Power all your hobbies with one charger. Such as battery packs for rc helicopters, tamiya rc trucks, Airsoft gun, RC Cars, and or remote controlled toys. Includes T Plug, Huanqi Plug, Tamiya battery Plug, mini tamiya battery plug, JST battery plug, SM 2P battery plug, Futaba/JR Receiver Plug..
  • PROLONG BATTERY LIFE &USAGE TIME: There is trickle current and smart charging manage system, the battery pack will be charged more fully and more balanced. Built-in protections guards against over-charge, over-current, short circuit and reverse polarity, protects your battery and extend life..
  • AUTO STOP SMART BATTERY CHARGER: If you plug in power, this Rc charger will automatically detect the battery voltage and match the right current to charge, it will shut off when battery is fully charged in order to avoid over-charge.Charging time is 6-10 hours depends on your battery capacity..
  • INTUITIVE CHARGE INDICATOR: LED light on the charger stays in Red during charging process and turns blue when battery is fully charged. Flashing red indicates that there is a bad connection. The blinking red and blue indicator indicates that the battery pol....
Check Stock

Maxmoral 7.4V 2S Lithium Battery Balance Charger 3P High-Speed Plug XH-3P for RC Helicopter Quadcopter Drone Aircraft

  • Package included: 1pcs 2S Lithium Battery Balance Charger..
  • 7.4V Charger with XH-3 Pin connector, fit most 7.4V Battery for RC Quadcopter ,RC Boat, RC Drone,and RC Truck..
  • Function:Intelligent IC control circuit is adopted internally to balance the charging of 7.4V lithium battery..
  • Output: DC 7.4V 800mA,Input: 110-240V 50-60hz..
  • This charger is connected to the power supply to light the green light,connected to the battery charging red light, full battery light green..
Check Stock

Blomiky 7.4V Lipo Battery Charger with XH-3P Port for S yma X8C 8W X8G X8 X8HC X8HW X8HG RC Drone and SCX24 RC Trucks X8 Charger

  • Attention Charger port: XH-3P, white 3 pin. only fit for XH-3P plug,7.4V 2S Li-ion or Lipo rechargeable battery. 7.4V charger many types now. 7.4V 2S....
  • Wall charger Input:110-240V 50/60HZ, Output:10V 800mA, Balance Charger:Input:10V, Output: 7.4V,.
  • 7.4V 2S Li-ion or Lipo balance Charger for S yma X8C 8W X8G X8 X8HC X8HW X8HG RC Quadcopter Drone Force1 DEERC RC Boat RC helicopter Hosim Laegendary....
  • 7.4V 2S Li-ion or Lipo balance Charger for Zeee Venom Fly Goldbat Ovonic AWANFI HOOVO Dynamite URGENEX Gens ace POVWAY 7.4V 2S 800mAh 1000mAh 850mAh....
  • 7.4V 2S Lipo li-ion battery charger fit for WLOTYS Blomiky DEERC high Speed RC Truck 7.4V Battery..
Check Stock

Havcybin B6 Lipo Battery Balance Charger 80W 6A Discharger, RC Hobby Batteries Balance Charger LED W/AC Power W/Battery Checker for NiMH/NiCd (1-15S), LiPo/Li-ion/Life Battery (1-6S)

  • 【High-quality and Safety】The B6 charger is made of high-quality chips and materials to provide you high-quality products and function performance, and the charger also has short-circuit protection, overcharge protection, overcurrent protection and overheat protection for safety design.it is very safe to buy..
  • 【Multiple Battery Compatibility】This B6 charger can charge a variety of rechargeable batteries, including NiCd/NiMH batteries, Li-ion batteries, LiPo batteries, LiFe batteries, LiHV batteries and Pb batteries. This is a multifunctional charger, you only need to select the correct battery type when charging, It is very convenient and easy to use..
  • 【LCD Display】To facilitate you to choose the mode you need. This B6 charger has a LCD display, you can view all charging status and settings on the charger LCD screen when you browse the mode and select..
  • 【Easy to Use】Press "Batt type" button to enter user settings or select battery type or exit the program. If you need to alter the parameter value in the program, press start/enter key to make it blink then change the value with "INC" or "DEC" key. The value will be stored by pressing "Start/Enter" key once. Press and hold the "start" button to charge the battery..
Check Stock

Melasta 7.2V 9.6V 8.4V RC Car Battery Charger Compatible with Redcat Racing Hexfly NiMH Battery and Standard Tamiya Battery, 2.4V-12V NiMH/NiCD Universal RC Charger

  • 2 in 1 RC Battery Charger: The Melasta RC charger has a standard Compatible with tamiya connector that fits most NiMH RC batteries and it comes with an extra for HXT 4.0mm banana plug for Redcat Hexfly NiMH batteries. Universally charges Ni-MH or Ni-CD battery packs of 2.4V-12V voltage..
  • Smart Trickle Charger: Automatically detects the voltage of your battery and shuts off when battery is fully charged in order to avoid over-charge. Charges at a 800mA for 2.4V-7.2V battery or 500mA for 8.4V-9.6V battery. Typical charging time is 6-10 hours depends on battery capacity..
  • Intuitive Charge Indicator: LED light on the charger stays in Red during charging process and turns Green when battery is fully charged. Flashing red indicates that there is a bad connection. Lights off means charger is defective, replace needed...
  • Safe & Reliable: Built-in protections guards against over-charge, over-current, short circuit and reverse polarity, protects your battery and extend its’ longevity. Note: DO NOT charge LiPO batteries with this charger..
  • Customer Friendly Service: Melasta NiMH RC charger comes 30 days money back guarantee and 12 months replacement warranty. Do not hesitate to us know if you have any question about our product..
Check Stock

Blomiky 1 Pack DC 6V 200mA AC 110V US Adapter Charger for 6V AA 700mAH 800mAH 2200mAH Ni-CD Ni-Mh Battery 1:18 Scale Stunt RC Speed Buggy Car Amphibious Stunt RC Cars GS02 Charger 1

  • Charger Connector Plug: SM-2P black 2 pin, Input:100-240V 50Hz/60Hz, Out put:6.0V 200mA. US Plug. charger cable length about :60cm,.
  • Red light not change after full charged for Nicd/NiMH wall charger, don’t worry, built-in protection board, it will stop charge after full charged 6V NiCd or NiMH battery.. It take 4-6 hours to full charge 6V 700mAh Battery. 6V AA AAA NiCd or NiMH USB Charger cable fit for 6.0V 400mAh 500mAh 600mAh 700mAh 800mAh 900mAh 1500mAh 2000mAh 2200mAh NiCd or NiMh 5-Cell AA or AAA Battery pack, use same SM-2P plug..
  • 6V Charger fit for SZJJX SPESXFUN BEZGAR 17 18 Cyan Cradream Clesea 1:14 Scale RC Crawler Remote Control Cars 6V 700mAh 800mAh battery. 6V USB charger replaced for Powerextra Gesture Sensor Transform RC Stunt Car battery..
  • 6.0V Charger Apdater fit for SGILE 1:16 scale Remote Control Car Joyfun Exhobby Russan Seckton allcaca FSTgo HOMOFY Tuptoel FREE TO FLY ZHouxue Middle Size 11-12 inch Waterproof Amphibious RC Stunt Car 5-Cell AA Battery pack ,Color maybe white ,green or red..
  • 6.0V Adapter Charger fit for DOUBLE E RC Car 1:12 Remote Control Car Monster Trucks, Color maybe green 6V 700mAh 5-Cell AA battery..
Check Stock

SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging

  • Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
  • Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
  • This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
  • Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
  • Package Contains: 1x SKYRC B6 mini Charger.
  • 1x T Plug with Banana connector Charging Cable.
  • 1x DC Cable with Alligator Clip Charging Connector.
  • 1x T Plug with Alligator Clip connector Charging Cable.
  • 1x T Plug with Futaba connector Charging Cable.
  • 1x T Plug with JST connector Charging Cable.
  • 1x T Plug with XT60 connector Charging Cable.
Check Stock

UpBright 5V AC/DC Adapter Compatible with ZipSnip RC2602 M RC2602M Zip Snip RC2600 ShopSeries Rockwell 3.6V Lithium Battery Cutter Cutting Tool 41014807000 BHY410700250U 4.8V 7V Power Supply Charger

  • ...er Compatible with ZipSnip RC2602 RC 2602 Zip Snip 3.6V 3.6Vdc 3.6 Volt Lithium Ion Li-Ion Rechargeable Battery Cordless Cutter Cutting Saw Tool Nip Article no.: 41014807000 4.8V - 7V 250mA 700mA 4.8VDC - 7VDC 0.25A 0.7A - 1A DC4.8V - DC7V 7.0V - 5.0V 5VDC DC5V Switching Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with: ZipSnip RC2602 RC2602.M RC2602M Heavy Duty 3.6V Self Sharpening Cordless Cutter Lithium Zip Snip cutting tool.
  • ZipSnip BHY410700250U 15W 7V 250mA Zip Snip Class 2 Power Unit.
  • Compatible with: ZipSnip RC2600 ShopSeries Rockwell Rechargeable Handheld Heavy Duty Rotary Cordless Cutter Zip Snip RC 2600 Shop Series Rock well Cut Cutter zip snip cutting tool.
  • ⚠️!!!Note: ONLY for brand name "ZipSnip" ✅ 3.6V Zip Snip Cordless Cutter. NOT for "Worx" ❌ Zip Snip Cordless Cutter. Someone may have bought it by mistake. Please Check For Compatibility With Your Unit. Thanks..
  • !!!Note: Rechargeable batteries don't last forever, the average battery last 1 to 3 years. If the battery is old/dead, it will not accept a charge. But not charger's problem. If you're not sure whether battery or charger is dead or not. You must have a volt meter in order to tell whether or not a charger is working..
Check Stock

UpBright 12V AC/DC Adapter Replacement for Tenergy TB6B TB6-1 Turnigy SKYRC KYRC MY-B6V8+ B6 iMAX B6AC Clone Lipo NiMH/NiCD/Li-PO/Li-Fe/SLA/Fast LiPo Battery Blance Le pai LP-S60 Power Cord

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection)..
  • UpBright NEW Global 12V AC / DC Adapter Replacement For Tenergy TB6B TB6-1 Turnigy SKYRC KYRC MY-B6V8+ B6 iMAX B6AC Clone Lipo NiMH/NiCD/Li-PO/Li-Fe/SLA / Fast LiPo Battery Blance Charger Lepai LP-S60 45W - 60W 12VDC 5A Switching Power Supply Cord Cable PS Battery Charger Mains PSU.
  • Fits Turnigy Accucel 6 Lipo A123 NiMH NiCd / Turnigy Accucel-6 50W 6A Balancer Charger LiPo LiFe NiMh NiCd JST-XH / ((King HKC6, HobbyKing 50watt 5A X-Charger/Balancer, and HobbyKing ECO6 50W 5A Channel Well Technology.
  • Tenergy B450AC 45W & TB6AC 50W/5A AC/DC Dual Power Balancing.
  • Fits Lepai LP-S60 LPS60 4-Channel Hi-Fi USB FM Card Player Stereo Amplifier, Tenergy TB6B TB6-1 Vantage B6s Charger Li-Po,Li-ion, Li-Fe, SLA 12 VDC 5000mA 12.0V 5.0A 60 Watts Power Supply.
  • (NOTE ! THIS ITEM WILL NOT FIT : 80W Accucel 6 Digital charger High Power (80W) 10a ).
Check Stock