Top Receiver Pd Module

Durablow TR2003 Gas Fire Fireplace On/Off Remote Control Kit + Thermostat + Timer for Millivolt Valve, IPI Module, Replaces Wall Switch or Thermostat (Input 100-240VAC)

  • ★★ ATTENTION: This device is NOT a power supply unit. It is a switch designed for connecting to Millivolt valve, or to electric spark ignition module, or can replace wall switch..
  • ▼ All battery powered R.F. 2-button transmitter and receiver box kit gives wireless remote control to a gas heating appliance, such as gas fireplace, fire pit, stove. ▼ This is a simple On/Off remote control, gives an instant & manual control of the flame and heat..
  • ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to connect MILLIVOLT valve, or electric spark ignition module, or to replace wall switch. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first).
  • ▼ Replaces Cross Reference Model #: SKY, 1001, 1001-A, 1001TH, 1001T, 1001D 1410, 1410T, 1410-A, 1410TH, RG04-1M, UN3. ▼ LEGAL DISCLAIMER: The Brand name & Model # (if listed) are for cross reference only. All Brands, Trademarks & Model Numbers remain the property of their respective owners..
  • ▼ Includes: Remote transmitter, receiver box, wall mount cover plate, screws, slide switch, wires with connectors, manuals / instructions. ▼ FCC approved. Operates at a range of 20-foot & non-directional RF signal. ▼ Transmitter operates (2) 1.5V AAA bat....
Check Stock

Taidacent 20mm to 80mm Long Distance 12V to 24V Input 5V 2A Output Wireless Power Supply Module Wireless Charging Coil Module Wireless Inductive Coil

  • The transmission voltage is designed with a wide voltage: 12V~24V..
  • Receiver coil size: outer diameter 88mm..
  • Sensing distance: Receive output 5V2A at 20mm.
  • Note: The distance between the two coils need greater than 13mm!.
Check Stock

Drone Racing League: 2017 eSports Tryouts

  • ...ke other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
Check Stock

Oiyagai 3pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for Arduino/Arm/McU/Raspberry pi (433MHz)

  • 3 x Transmitter module (433MHz) & 3 x Receiver module(433Mhz).
  • These modules are used for projects when you need to communicate wirelessly between 2 devices.
  • It is possible to increase the range by adding a small length of cable which the device will use as an aerial..
  • VCC voltage module operating voltage and good power filtering.
  • Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source.
Check Stock

Marantz SA10S1 SA-10 Super Audio CD Player, Black

  • ...izing the adverse effect of unwanted vibrations on sound quality. And all from a package with a tiny footprint that occupies an area of just 215mm x 232mm (8.5” x 9.1”), allowing users to comfortably locate the unit on the smallest of desktops..
  • Unlike most other CD Players, the PD-301-X also features a FM Tuner module within its compact cabinet..
  • In addition to conventional analogue audio outputs, audio signals from the PD-301-X’s built-in FM tuner are also delivered from the digital audio outputs, via both the coaxial and optical connectors (of course, these connections also deliver digital audio from CD). Please note that the digital audio output format is PCM 44.1kHz/16-bit, regardless of the resolution of the original source..
Check Stock

AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi

  • Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
  • Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
  • It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
  • PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
  • Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..
Check Stock

Bose Lifestyle 600 Home Entertainment System, works with Alexa - White

  • Jewel cube satellite speakers are sleek and compact, and create dynamic surround sound.
  • Dimensions (”): Console – 15.98 W x 2.56 H x 10.16 D | Jewel Side speakers (each) – 2.6 W x 6.2 H x 2.6 L | Jewel Center speaker – 6.1 W x 2.7 H x 2.6 L | Bass module – 12 W x 12 H x 12 L.
  • As main components, your purchase include: One Console, 4 OnmiJewel side speakers, One OmniJewel center speaker, One Acoustimass wireless bass module, universal remote control, 2 wireless receivers, One ADAPTiQ headset and Owner’s guide.
  • Front and center speakers have a wired connection, while the 2-rear speakers connect to a wireless receiver and AC power mains. The rear speakers and bass module connect to the front module wirelessly.
  • Supported Audio formats – Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, Multichannel PCM. Video Source compatibility – Support for six 4K/60 video sources (HDMI 2.0/HDCP 2.2).
Check Stock

Low Noise Water Pump, Waterproof Plug and Play Water Pump with Motor, 370 Water Cooling Pump, Durable for RC Boat RC Aircraft Carriers DIY RC Boat RC Warships

  • The power supply method is not to take power from the receiver, battery used is greater than 2S and the voltage is between 7‑28V, need to use a step‑down module to make the operation more stable..
  • Suitable for installation on remote control boats that require water cooling with water‑cooled motors and without water‑absorbing steering gear.
  • Put it to work normally, the temperature will be hot, but it belongs to the normal range and will not affect the use..
  • Under the condition of 5V voltage, the pump works continuously for 15 hours and pumps water continuously..
  • It is waterproof and works well in water, JR plug suitable for plug into the receiver, plug and play..
Check Stock

ACEBEAM X75 Brightest Flashlight 80,000 Lumens PD60W-100W USB-C Fast Charging/Discharging 1-1.5h Full Charge Intelligent Temperature Control Detachable Cooling Fan Handheld Searchlight

  • 80,000 lumens max output. USB Type-C PD60W fast charging (Standard).
  • 1.5 hours for full charging. Also can compatible PD100W fast charging(Max).
  • Detachable, maintainable and waterproof cooling fan(IP68). Can set the Windy mode or Non-wind mode..
  • Intelligent cooling fan and Intelligent thermal control module..
  • Built-in dual intelligent temperature regulation systems..
  • Momentary Turbo activation rapidly responds to emergency situations..
Check Stock

Happymodel ELRS 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver EP1 RX

  • The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released..
  • On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and....
  • Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop....
Check Stock

ACEIRMC Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino Electronic Building DIY ， Pack of 6 Sets

  • This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program..
  • It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including for Arduino/51/AVR/ARM.
  • With signal indicating LED, easy to observe and debug..
  • Pin Definitions: (1) Output (2) Vcc (3) GND.
  • IR Infrared Transmitter Module Ir Digital 38khz Infrared Receiver Sensor Module For Arduino Electronic Building Block.
Check Stock

Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE

  • Works with all of Adafruit's three basic 315MHz RF receiver modules.
  • Only a transmitter, no receiver module included.
Check Stock