Top Removes Slag

YESWELDER Flux Core Mig Wire, Mild Steel E71TGS.035-Diameter, 10-Pound Spool

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ☛ 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb t....
Check Stock

Ingersoll Rand EC400-NS Edge Series Needle Scaler Attachment, Screw On for Use w/ 114GQC Air Hammer (0.401 Diameter Barrel), Paint, Rust, Dirt and Weld Dust Remover

  • AIR HAMMER ATTACHMENT: Change your air hammer into a needle scaler with just a twist of the arm. The EC400-NS Needle Scaler Attachment gives you the versatility you need to fly through real work.
  • COMPATIBILITY: Designed for use with the Ingersoll Rand 114GQC Air Hammer (0.401 diameter barrel), and has a super easy screw on application.
  • APPLICATIONS: Effectively removes paint, rust, dirt and weld slag.
  • 19 NEEDLES: Uses 19 3mm diameter steel needles with durable steel housing.
  • Has been rigorously tested to ensure its long-lasting performance.
  • INGERSOLL RAND DIFFERENCE: For more than 100 years, Ingersoll Rand’s advanced engineering, manufacturing, and service models have set a standard of excellence.
  • Trust Ingersoll Rand to help you complete your work faster and easier than ever before.
Check Stock

Vaper 41225 Chipping Hammer

  • ✔️What You Get? --- In this welding slag removing tools kit, there is 1 piece 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Size Detail --- Welding Chipping Hammer: 255 × 125 × 20mm/10 × 5 × 0.78 inch (Handle length × Cone part length × Cone part width).
  • Wire Brush: 252 × 120mm/9.9 × 4.7 inch (Total length × Brush length).
  • Welding Gloves: 415mm/16.3 inch (Length)..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole on the end of handle, which is convenient for storage while not use it..
  • ✔️ Welding Chipping Hammer --- This professional welding hammer is forged with premium high carbon steel overal heat treatment, with high hardness, strength and toughness. Designed with a steel coil spring h....
Check Stock

Keadic Professional Welding Slag Removal Tools Kit, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Welding Plier, Wire Brush & Welding Gloves Heat/Fire Resistant

  • ✔️ Complete Welding Slag Removal Tools Kit --- In our multi-function welding tools set, we prepared 3 practical welding slag removing tools for you, including 1 8 Inch Anti-Rust Welding Plier, 1 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Anti-Rust Welding Plier --- The pliers body is forged with high quality carbon steel, sturdy and durable, not easy to rust/deform/break.The precise tooth pattern provide it strong clamping force, no-slip. After special heat treatment, the jaws are very sharper and firmer, which improves its service life. Further more, its ergonomic rubber covered handle bring you comfortable touch, suitable for long time operation..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole ....
Check Stock

Swpeet 5Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves, 8 Inch Welding Plier and 10 Inch Welding Chipping Hammer with Steel Coil Spring Handle

  • ☛ 1, What You Get ------ In this kit, You will get 5Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 piece welding plier, In total 5Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the s....
Check Stock

Wild Tornado Pipe Dredge Deodorant, Powerful Sink and Drain Cleaner, Quick Foaming Toilet Cleaner, Dredge Agent for Kitchen and Toilet Pipes (2pcs)

  • 【Safety Materials】 - Sink and Drain Cleaner is made from a non-corrosive formula that is safe in septic systems. It won't damage your drains system. As it is made only of non-corrosive and non-caustic materials..
  • 【Super Powerful Decontamination Ability】 - Flush your toilet to help remove hard water deposits, rings, stains, and odors from your toilet tank. Improves washing and helps to better clean the water jet stream..
  • 【Easy To Use】 - Simply pour a packet of powder into the toilet tank, no scrubbing required. Does the nasty job for you using a powerful cyclonic foam action that removes build-up, slag and rust marks..
  • 【Working Principle】 - The powerful sink and drain cleaners work by dissolving grease, hair, paper, grease, and organic matter..
  • 【Wide Applications】 - It is the best deodorizer and cleaner for home kitchen, vanity, bathtub, shower, sewer drain, kitchen water pipes, toilets, bathrooms, floor drains, oil clogging, submerged sewage pipes and other drain and sink pipes..
Check Stock

INETUB BA71TGS .030-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feed-ability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock

44 lb Roll ER70S-6 0.035\ - 0.045\ Mild Steel Mig Welding Wire (0.035\ X 44#)

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock

YESWELDER Flux Core Gasless Mig Wire Mild Steel E71TGS.030-Diameter 2-Pound Spool

  • [E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld..
  • [APPLICATIONS] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding..
  • [EXCELLENT PERFORMANCE] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance..
  • [WELDING METHODS] Vertical Welding, Flat Welding, Up Welding, Corner Welding..
  • [SPECIFICATIONS] Weight: 2lbs/Diameter: .030''(0.8mm).
Check Stock

YESWELDER Flux Core Mig Wire, Mild Steel E71TGS.030-Diameter, 10-Pound Spool

  • [E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld..
  • [Good Performance] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance..
  • [Applications] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding..
  • [Brand-new Plate] Use new ABS materials, Durability, Toughness, Anti-Fragility..
  • [Specifications] Weight: 10lbs(4.5kg)/Diameter: .030''(0.8mm).
Check Stock

Hilitchi 4Pcs Welding Slag Removal Tool Set, 8inch Multi-Function Welding Pliers, Welding Chipping Hammer with Coil Spring Handle, Wire Brush Wire Scratch Brush for Cleaning Rust and Welding Gloves

  • 【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. The welding pliers is with ergonomic grip, easy to operate. Practical slag removal tool we offer..
  • 【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
  • 【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use.....
Check Stock