Top Replacement Chair Leg Bases

Silicone Chair Leg Floor Protectors for Carpet, Small Slider Chair Leg Caps for Tiled Floors, Glide Furniture Leg Feet Cover Protect Carpeted Floor, 16 Pieces (Round - Clear, Fit: 0.75-1.1")

  • ... ❤ [100% RISK FREE PURCHASE] – The silicone cap covers are water proof. Put furniture feet floor protectors on outside chair or table metal legs to keep them from rust. If you have any question about the furniture leg protectors, please feel free to contact us. Any Issues, send us an email, we send you a free replacement or Return for refund even it passed free return window..
Check Stock

Wrought Iron Patio Furniture Legs Caps, 1-1/2

  • ...ted but also help the chairs and tables slide with ease.Our wrought iron furniture glides are made with UV resistant plastic that will provide years of use and endure whatever weather may come.
  • 【TIPS FOR EASY INSTALLATION】：A rubber hammer or mallet is recommended for installation. It is helpful to putting this replacement leg end caps in hot water for about 1 minute or you can heat them with heat gun to soften them, then you will find it’s easier to make the glides inserted with a mallet. And if the wrought iron chair feets are rusty on the inner edge, you may need to sand or dremmel any corrosion off inside edge.
  • 【PATIO FURNITURE LEG CAPS WITH DRAIN HOLE】: This metal chair leg caps is designed with a little holes that allows moisture to escape to avoid rusting of wrought iron tables or chairs due to moisture accumulation. You will be happy to see the little rust circles disappear on your deck.
Check Stock

Furnigear Plastic Plugs Tubing End Caps Chair End Caps 3/4” Inner Size Tubing Caps Round Furniture Sliders Glides Black(40pack)

  • ❤Furnigear 3/4” Black Plastic Plugs End Caps (40pcs), perfect fit for 3/4” (0.68-0.75”) inner size of pipe tubing. Outside diameter is 0.78”. Warm tips: Please measure your chair leg (inner size) and choose correct size..
  • ❤Plastic Plugs for Use in Plugging Holes: Plastic hole plugs fit for stainless steel pipe, aluminum, metal and other tubular poles. Chair end caps keep sharp parts from being exposed, scratch the floor or accidentally injure your family..
  • ❤Chair Leg Caps Fit for Homemade and Outdoor Projects. Best chair glide for your kitchen stool legs, barstool chairs, fence post caps. Replacement for patio furniture leg protectors, stainless steel railing pipe, other tubular or any round opening..
  • ❤Easy to Install: Plastic plugs insert snapped right into tube or hammer plugs in. Installs easily and securely. Lasting protection and prevents scratching of your floor surface and protects your expensive furniture when furniture is moved..
  • ❤40 Pack 3/4″ Round Plastic Tubing end caps made by high quality plastic material and no odor smells，4.5mm thicken bottom, durable chair glide. Best furniture slider for carpet, moving easily. Chair leg inserts for metal legs, keeping securely..
Check Stock

Office Chair Wheels - Office Chair Casters Wheels for Carpet and Hardwood Floors, 3 Inch Replacement Rubber Chair Casters (Set of 5, Black)

  • ➤ WHAT'S IN THE BOX: 1 Set of Office Chair Black Base Replacement, Installation Package, 1 Base Cap..
  • ➤ PREMIUM GRADE METAL MADE STRONG BASE REPLACEMENT: This Heavy Duty Chrome Base Stool is manufactured to meet the Office Chair's highest industry standard (BIFMA and ANSI). The reinforced metal and durability of the base will ensure your chair's base is firmly sound for many years..
  • ➤ UNIVERSAL SIZE: The office chair base works perfectly with almost every office chair, gaming chair, desk chair, task chair and swivel chair on the market. The office chair base replacement has universal sockets that will fit your original casters and gas lift cylinder..
  • ➤ SIZE DETAIL: Office Chair Base Size in Diameter: 28’’ (70 cm). Chrome Base Leg Length: 12.6’’ (32 cm). Standard Gas Cylinder Socket: 2’’ (5 cm). Standard Caster Sockets: 7/16’’ x 7/8’’ (11mm x 22mm). Height of the Chrome Base: 4’’ (10 cm).
  • ➤ 100% SATISFACTION GUARANTEED - Very easy installation and replacement with our simple and clear instruction sheet. If this doesn't fit your chair, you can simply return it for a full refund..
Check Stock

Extra Small Silicone Chair Leg Floor Protectors with Felt, FIT 0.5” to 1” Chair Leg Caps Silicon Furniture Leg Feet Cover Bottom Slide Protect Wooden Floor No Scratches No Noise Clear 16 Pcs

  • ...[Water Proof & 100% RISK FREE PURCHASE] – The silicone chair feet cap covers are water proof. Put furniture feet floor protectors on outside chair or table metal legs to keep them from rust. If you have any question about the furniture leg protectors, please feel free to contact us. Any Issues, we send you a free replacement or Return for refund..
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

Black Silicone Chair Leg Floor Protectors with Felt, Extra Small Chair Leg Caps FIT 0.5" - 1" Silicon Furniture Leg Feet Cover Bottom Protect Wooden Floor No Scratches No Noise 16 Pcs

  • ...er Proof & 100% RISK FREE PURCHASE] – The silicone chair feet cap covers are water proof. Put furniture feet floor protectors on outside chair or table metal legs to keep them from rust. If you have any question about the furniture leg protectors, please feel free to contact us. Any Issues, we send you a free replacement or Return for refund..
Check Stock

Jmkcoz 4 Pcs Zero Gravity Chair Replacement Cords Universal Replacement Laces for Antigravity Chair, Bungee Elastic Lounge Chair Cord Nylon Stretch Patio Recliners Repair Cord for Outdoor, Lawn Chair

  • 4 Pack Zero Gravity Recliner Repair Cords: 2 pcs short chair replacement cords (1.4 m/ 4.92 feet) for the backrest position of the zero gravity chair, 2 pcs long chair repair cords (2.2 m/ 7.21 feet) for the leg position of the zero gravity chair..
  • Bungee Elastic Lawn Chair Cord Material: The replacement rope is made of impory latex and nylon, durable and good elasticity, strong bearing capacity and wear resistance, and the metal end clips ensure the stability of the stretch cord..
  • Easy to Install: Each antigravity chair replacement lace cords has metal barbs on both end, make it easily to repair quicker or replace the old poor elastic chair ropes, no any tools required and easy to twine..
  • Save Your Money: With the replacement elastic cords laces, you can repair your chair by yourself, save money to buy a new recliner, changing the bungee chair cord to get a better chair.
Check Stock

Lenshade 304 Stainless Steel Adjustable Furniture Levelers 5/16Inch Leg Leveler for Table,Chair,Furniture Legs-Set of 4(Black)

  • FURNITURE LEGS 4 INCHES - Perfect Height for Replacement Furniture Legs. Replace All Kind Of Couch Legs 4 Inch , Sofa Feet , Dresser Legs , Chair Risers 4 Inch ..
  • 2 DRILLS BITS - Furniture Feet Set Comes With 2 Drills Bits (12mm, 3mm) Which Saves Time And Money And Makes Replacement Furniture Legs Easy And Fast. 12mm Drill Helps You To Make Exact Hole For Wood Legs And 3mm Is Perfect For Screws..
  • UNIVERSAL FIT - Our Wood Furniture Legs Are Universal Fit And Can Be Used On Any Find Of Furniture Such As Couch Feet, Sofa Legs 4 Inch Dresser Legs, Cabinet Feet, Table Leg Extenders, Chair Leg ..
  • HIGH QUALITY - Wooden Legs For Furniture Are Made Of Solid Rubber-wood, With High Quality Brown Color Finished. Wooden Leg Makes Your Furniture Look More Styles. Patas de repuesto para muebles..
  • MONEY SAVER - Furniture Feet Wood Set Is Big Money Saver As It Comes With All The Things You Need To Replacement Legs For Couch Or Your Furniture Leg 4 Wooden Legs , M8 Screw And Cap, 4 Felt Pads, 4 Metal Pads, 2 Drills Bits (12mm, 3mm)..
Check Stock

Table Leg, Pedestal, 25.5

  • Strong, lightweight steel with a chrome finish.
  • You will need to polish the leg - it will have lubricant on it from pipe machine used to manufacture.
  • Table Leg 25 ½” x 2" diameter with ends that are "fluted" or crimped to insure a snug fit into the bases.
  • Bases *NOT* included - these will need to be purchased separately.
Check Stock

40 PCS Furniture Silicon Protection Cover- Furniture Leg Silicon Protection Covers, Anti-Slip Table Feet Pad Floor Protector Bottom Cover Prevents Scratches and Noisese Without Leaving Marks

  • ...et and other shapes. If appropriate, you can easily hold the chair legs like gloves. Please measure the size of the chair legs before ordering..
  • ✔[Lifetime Warranty]: Our products have been strictly tested and caring, because we believe that you deserve the best product. We eliminate all risks. We support lifetime replacement, please feel free to contact our customer service. You deserve the best product..
Check Stock

Mastery Mart Office Chair Base Replacement, 28 Inch Heavy Duty(2500 Lbs) Metal Leg, Reinforced to Repair Swivel Gaming Chair Bottom Part with Universal Caster and Gas Cylinder Size (Matte Black)

  • ➤ WHAT'S IN THE BOX: 1 Set of Office Chair Black Base Replacement, Installation Package, 1 Base Cap..
  • ➤ PREMIUM GRADE METAL MADE STRONG BASE REPLACEMENT: This Heavy Duty Chrome Base Stool is manufactured to meet the Office Chair's highest industry standard. The reinforced metal and durability of the base will ensure your chair's base is firmly sound for many years..
  • ➤ UNIVERSAL SIZE: The office chair base works perfectly with almost every office chair, gaming chair, desk chair, task chair and swivel chair on the market. The office chair base replacement has universal sockets that will fit your original casters and gas lift cylinder..
  • ➤ SIZE DETAIL: Office Chair Base Size in Diameter: 28’’ (70 cm). Chrome Base Leg Length: 12.6’’ (32 cm). Standard Gas Cylinder Socket: 2’’ (5 cm). Standard Caster Sockets: 7/16’’ x 7/8’’ (11mm x 22mm). Height of the Chrome Base: 4’’ (10 cm).
  • ➤ 100% SATISFACTION GUARANTEED - Very easy installation and replacement with our simple and clear instruction sheet. If this doesn't fit your chair, you can simply return it for a full refund..
Check Stock