Top Retrofit Tubes

Aftermarket Replacement 4 Pc Set Halogen Headlights & Signal Marker Lamps Compatible with 1999-2007 Sierra Pickup Truck Replaces 15199560 15199561 15850351 15850352

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your....
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 5000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 3000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 4000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72629 LED Recessed Lighting Retrofit Kit 8\ 35W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

JESLED T8 T10 T12 8FT LED Light Bulbs, 50W 6000LM, 5000K Daylight White, Single Pin Fa8 LED Tube Replacement for Fluorescent Fixtures, Frosted, Ballast Bypass, Warehouse Workshop Garage Lights 4-Pack

  • 【BRIGHT, ENERGY SAVING】 - JESLED T8 T10 T12 8ft LED bulbs can illuminate your space with 6000+ lumens. Instantly save 62% on your electricity bill when you replace 130watt old fluorescent tubes with high output 50w 8foot LED tubes..
  • 【LONG LASTING TUBE】 - JESLED shatterproof single pin 8ft LED tube light have an outstanding life rating of 50,000+ hours! These 8ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
  • EASY BALLAST BYPASS INSTALL】 - JESLED fa8 8ft LED light bulbs are dual-end powered and require a simple, energy-saving, ballast bypass (direct wire) installation. Refer to our installation guide for details. NOTE: Please install this item away from the radio, remote control door, etc., which may cause EMI..
  • 【FLUORESCENT TUBE REPLACEMENT】 - JESLED Single pin 8ft LED Replacements are ideal for fluorescent fixtures. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever. Retrofit your garage, warehouse, workshop and more..
  • 【HASSLE-FREE WARRANTY】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if you meet any issue..
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72631 LED Recessed Lighting Retrofit Kit 8\ 35W 5000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

Feit Electric Led 60W Replacement Day Light (6 in 1 Pack), 6Count

  • ✅ PLUG & PLAY - Upgrade your existing fluorescent fixture to the latest energy saving LED technology with this easy plug and play direct installation tube. There's no need to replace, bypass or remove old ballast.
  • ✅ BRIGHT CRISP LIGHT - These 4' led tubes offer an easy retrofit or conversion option that enhances your lighting to a vibrant light ideal for task lighting at a color temperature of 4100K or cool white.
  • ✅ ENERGY SAVING - These 40-watt equivalent LED tube lights only use 14 watts and produce 1750 lumens.
  • Emits no ultraviolet light which makes it safe to use in your garage, shop or warehouse.
  • ✅ DURABLE - These 4ft LED bulbs are rated up to 50000 hours or over 45 years and save you money on energy costs and with a long lifespan.
  • reduce the cost and hassle of renewing them.
  • ✅ UL LISTED - DLC CERTIFIED - Feit Electric upholds the highest standards for all our products with optimal performance and safety.
  • With 40+ years of experience in lighting, we are the leader in lighting innovations.
Check Stock

Morris Products 72656 LED 4\ Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K, 1-Pack

  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K provide an energy efficient alternative to Incandescent lighting..
  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K features include:.
  • Can be installed in most 4" downlight cans.
Check Stock