Top Rf Power Amplifier

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • Professional-grade cable TV and antenna signal amplifier with high 40dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

Mixer Module, 0.1‑500MHz Low Distortion High Frequency Transducer -10dBm Conversion for Base Station for Quadrature Modulation for HF VHF Receiver

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

KICKER (2) 44L7S152 15" 4000 Watt Solobaric L7S Subwoofers+Amp+Sub Box+Wire Kit

  • Package Includes: (2) Kicker 15" Car Subwoofers. (1) RockvilIe Dual 15 MDF Solo Baric L7/L5/L3 Vented Subwoofer/Car Sub Box. (1) RockvilIe dB15 6000 Watt/3000w RMS Mono Class D 2 Ohm Car Audio Amplifier. (1)Engauge by Memphis KIT0 0 Gauge Amplifier Amp Installation Wire Kit 17 ft. RCAs. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. Features:.
  • Kicker L7S152 15" 2000 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S15-4. Dual Two-Ohm Voice Coils. Injection-Molded Polypropylene Cone. Patented Corner Ribs Minimize Distortion. SoloKon 360-Degree Back Bracing. Ribbed Santoprene Surround With Blue Surround Stitching. UniPlate Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management. Thick Tinsel Leads. Large Ceramic Magnet. Cast Aluminum Basket. Satin-Nickel Plated, Spring-Loaded Speaker Terminals.
  • The Solo-Baric L7S 15-Inch Subwoofer works best with a sealed or ported enclosure and 1,000 watts of recommended power. See below for more details. Specifications: Size: 15" (38.1 cm). Impedance: 2 Ohms DVC. Max Rec Amplifier Power: 2000 Watts Peak / 1000 Watts RMS. Sensitivity: 89.4 dB 1w/1m. Frequency Response: 18Hz - 100Hz. Moun....
Check Stock

High Frequency Transducer, Mixer Module 0.1‑500MHz Bandwidth Mixing for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Rockville Pair RKL65MBW 6.5" 700W Marine Boat Speakers W/Led+Black/White Grilles

  • Package Includes (2) Pair Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles. (1) Rockville MS10LB 10" 2400 Watt Black Marine/Boat 10" Free Air Subwoofer with LED. (1) Rockville DBM50 4000 Watt/980w RMS 5 Channel Marine/Boat Amplifier Amp+Mic. (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin.
  • Features of RKL65MBW: Pair Rockville RKL65MBW 6.5 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LEDs flash to the rhythm of the music. You can select either red or blue color LEDs on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire..
  • Features of MS10LB: Rockville MS10LB 10" Marine Free Air Subwoofer with LED (Black). Free air subwoofer does not require any enclosure. Max Power: 2400 Watts. RMS Power: 600 Watts. Polypropylene cone with Rubber edge. 2.0" 4 Layer dual voice coil. Molded ABS plastic basket made with a special blend that is wate....
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

KICKER 2 45L7R152 15 3600w L7R Car Subwoofers+Vented Box+Amplifier+Amp Kit

  • Package Includes: (2) Kicker 15" Car Subwoofers. (1) RockvilIe Dual 15 MDF Solo Baric L7/L5/L3 Vented Subwoofer/Car Sub Box. (1) RockvilIe dB16 8000 Watt/4000w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp. (1) RockvilIe RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. What's In The Box: (1) 15" Subwoofer.
  • (1) Owner's Manual. (2) Kicker Stickers. Features: KICKER 45L7R152 15" 1800 Watt L7R Car Subwoofer, Solo-Baric Sub 2-Ohm. RMS Power Handling: 900 Watts. Peak Power Handling: 1800 Watts. Dual Two-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals.
  • Sensitivity: 88.05 dB. Impedance: 2-Ohms. Mounting Depth: 8.38" inches. Mounting Diameter: 13.75" inches. Minimum Sealed Box Volume: 1.5 cubic feet. Maximum Sealed Box Volume: 3.0 cubic feet. Minimum Vented Box Volume: 3.0 cubic feet. Maximum Vented Box Volume: 6.0 cubic feet. Includes: Amplifier. Bass Re....
Check Stock

Five Star LTE Filter Improves TV Antenna Signals - HDTV Antennas Signal Purifier - Filters 4G Signal for a Clear Channels - Reduces Interference from Cell Towers - Pass Frequency 5-599Mhz

  • FILTERS ALL 4G LTE SIGNAL NOISE - Our LTE filter removes all noise caused by 4G cellular signals, letting through only TV signal frequencies between 5-599MHz, which allows you to experience quality, crisp TV with no cellular interference..
  • 4G LTE Filter - IMPROVES TV ANTENNA SIGNALS:4G lte filter removes noise for better picture.
  • Cleaning unwanted RF signal out of HDTV antenna system effectively. HDTV Band-pass filter can remove interference from frequency bands（3G/4G） outside the TV band. It can improve the TV signal..
  • Improves over the air signals by filtering out mobile LTE signal interference (3G and 4G) which can cause intermittent TV signal disruption including weak signals..
  • Simple installation - lte filter for antenna no external power supply required.Head connected to the antenna, tail connected to antenna amplifier or tv. LTE Filter, made only from premium materials, fits any TV antenna or amplifier and improves your signal, giving you crystal clear HDTV every time..
  • WORK FREQUENCY: Pass Frequency：5-599MHz. Cleaning unwanted RF signal out of HDTV antenna system effectively,Signal loss is 3dBi or less. Impendance: 75 Ω.
Check Stock

70 Feet 12V Long Run RGB LED Strip Light Waterproof Outdoor Landscape Colors Changing Rope Light Kit Comes with Mini RF Controller and Plug-in Power Supply

  • ✅ Long Run: Single strand continuous strip light runs up to 80ft in one piece, no splicing no amplifier, only one power and one controler from one....
  • ✅ RF Controller: Radio Frequency remote controller, easy to hide and cover, RF signal goes 30-40ft range and goes through walls. It has 8 static....
  • ✅ Super Bright LEDs: The strip light uses SMD 5050 triple chips RGB LEDs, 9 LEDs per foot, they have high luminious density with high brightness....
  • ✅ Low Voltage: DC 12V operated strip light comes with power supply, the strip light can be placed outdoor or indoor in moist area with no electrical....
  • ✅ Waterproof IP67: The strip light is endurable and encapsulated in a transparent silicone tube, super flexible for indoor outdoor illumination,....
Check Stock

KICKER 48TRTP122 TRTP 12" 1000w Down Firing Subwoofer Enclosure+Amplifier+Wires

  • Package Includes: (1) KICKER 48TRTP122 TRTP 12" 1000w Down Firing Subwoofer Enclosure+Passive Radiator, (1) Rockville dB12 2000 Watt Peak/500w RMS Mono 2 Ohm Amplifier Car Amp, (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's.
  • Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7’ Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets.
  • Features of dB12: Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp, Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, RF Fosgate, etc), - 2 Ohm: 500 Watts x 1 Channel.
  • 4 Ohm: 1200 Watts x 1 Channel, High-Speed MOSFET Power Supply, Designed, Engineered, Developed, and Quality Controlled in th....
Check Stock

9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier Kit with Active Return Zero Signal Loss VoIP Telephone Bypass Port includes F59 Terminators and 3' Custom Dedicated Power Cable

  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter..
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service..
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation..
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits..
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Complete kit includes Amplifier, Power Supply, three F59 terminators and Reliable Cable Superflex power connection cable..
Check Stock