Top Roofing Fastener

PORTER-CABLE 15 Degree Coil Roofing Nailer

Metabo HPT Roofing Nailer | Pneumatic | Accepts Coil Roofing Nails 7/8-Inch up to 1-3/4-Inch | 16 Degree Magazine | NV45AB2

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards.
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment.
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability.
• SPEED: Quick driving system, for maximum efficiency.
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving.
• RUBBER PADS: Help keep nailer from sliding off roof when not in use.
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions.

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

STINGER 0136260 NailPac Cap Nails - 1 Electro Galvanized Nails with 1 Plastic Collated Caps 0136260 for use with CN100B & CN100 Cap Nailers

• SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
• EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
• WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
• MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
• BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.

HANDLANDY Framer Work Gloves Open-Finger Carpenters Gloves，Dexterity Fingerless Framing Gloves (Large)

• Open finger design framers gloves allows for better dexterity, perfect for touch your screw and screen..
• Foam padded plam patch & breathable stretch spandex back provides hands better support & all-day comfort, gives extra protection from vibration while allowing flexibility..
• Uwrist Design: Exclusive U-shape adjustable wrist closure works perfectly with your watch, keep eyes on your time and your healthy during work, do not need to take off your gloves, and also provides ultra comfort and flexibility fitting. The most important, It can better hold your wrist and also offer the protection on your wrist from the risk of impaction..
• Slick hook and loop fastener does not snag or collect debris, and provides a snug fit..
• Hi-viz color block design back increases worker visibility on the job. Excellent multi purpose glove for auto mechanics, metal assembly tasks, rough framing, metal roofing and siding etc..

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
• Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

Metabo HPT Cap Stapler, Pneumatic, 18 Gauge, 1\ Cap Diameter, 7/8\ to 1-1/2\ Staple Length, 5-Year Warranty (N3808AP)

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
• APPLICATIONS: Ideal for roofing felt, foam insulation, and house wrap.
• LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use.
• FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths.
• CAPACITY: Basket holds 200 caps and magazine holds 200 staples.
• PERFORMANCE: Provide superior hold and shear values than common 3/8 In. systems.
• TRIGGER: Two triggers, red for sequential firing and black for bump firing.
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal fastener depth to accommodate a variety of applications.
• AIR DEFLECTOR: 360 degree adjustable air deflector directs the air exhaust in any direction.
• MAGAZINE: Translucent side-load cap magazine to easily identify remaining cap quantity.

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

• [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
• [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
• [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
• [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
• [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

• #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
• 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
• Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
• The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".