Top Round Die Stocks

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

16' Z V-Bit Style Tongs Knifemaking Bladesmith Blacksmith Tongs

  • Essential Tool – This 16” Z V-bit bladesmith can grip and support stocks that offering a better control over knife blades when forging hot steel..
  • Versatile Use – This tongs is very versatile that can grip a variety of round, flat, or square stocks. It provide a excellent support which is high strength, great balance and reliability..
  • Nice Control – The whole length of this tongs is about 16 inches and 2 lbs weight. It offers a great control and balance for gripping with one hand while you’re hammering with the other hand..
  • Heavy-Duty Steel Construction -- Rugged and durable blackening steel process ensure it can withstand very high temperatures. finished with non-slip wax and linseed oil to protect from rust and corrosion for long-lasting reliability..
  • Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..
Check Stock

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

  • 【Round Die】- Thread size: M6 x 1.0mm.
  • Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
  • 【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
  • 【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
  • 【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • 【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..
Check Stock

YiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm

  • 【Dimension】-Diameter: 45mm/1.77 inches.
  • 【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
  • Used to make new threads when the threads are seriously damaged.
  • 【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
  • 【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
  • The die stock can securely hold round dies and is easy to operate.
  • 【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
Check Stock

Sabarot - Dried Morels, 30g (1.1 oz)

  • Premium quality, A grade, whole dried morel mushrooms..
  • Great for soups, stocks, stuffing & more!.
  • Easy to use, easier to store. Rehydration instructions included..
Check Stock

Pet Magasin Thermal Self-Heated Bed for Cat, Pack of 2, Small

  • ⚡ Holiday Promotion $21.99 ⚡ ADD TO CART NOW while stocks last.
  • TWO MATS:1 large (22″ x 18.5″) and 1 small (17″ x 11″).
  • A velvety cover on top and padded with thick, soft, hypoallergenic foam that will stay springy for years.
  • WORKING ALL YEAR ROUND: The mats generate heat just right and enough for both cold winter and warm summer so that your cats will love it all year round.
  • Includes a layer of Mylar film, the same super-insulating material used in spacesuits.
  • recommended to wash with hands due to the special self heating material inside.
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Golden Eye Tactical-Steel Handguard Bipod Adapter Sling Stud

  • Allow you to match any Harris Bipod to your favorite firearm.
  • Allows mounting of swivel stud on hollow synthetic forends..
  • 5/8″ round head flange nut works well on and compatible with Rugerr Model 77 Synthetic stocks,wood fore-ends under magazines or gas tubes.
Check Stock

LimbSaver Snap-On Recoil Pad for 6-Position Adjustable Stocks, Black

  • Snaps onto most 6-position mil-spec style tactical stocks.
  • Reduces muzzle jump allowing for faster target re-acquisition.
  • Non-slip surface helps keep rifle securely positioned against your shoulder.
  • Semi-flexible material is designed to snap over tactical stocks.
  • Sizing information: For 6-position tactical stocks measuring around 5.14" x 1.84" at butt end. Stock must have 1/4” step-down for pad to snap on. This pad is NOT designed to work with Magpul or other non-mil-spec or non-mil-spec style stocks without a 1/4" step-down..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

25pcs 1/2X6 Anchors Toggle Bolts and Wings Toggle Bolts Round Head

  • Volume Price Breaks Available. Contact Aspen Fasteners.
  • Aspen Fasteners stocks over 300,000 different fasteners for immediate delivery. Also, through our partners we have access to virtually every fastener type.
  • Standard and specialty items by print. If you have any questions or can't find what you are.
Check Stock