Top Samsung 3d Ir Emitters

4 Pack 3DHeaven Rechargeable 3D Glasses Compatible with EPSON ELPGS03 3-D Glasses

  • ...n, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
  • [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
  • Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
  • [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
  • [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then start pairing. Package include: 3D RF glasses x 2.
Check Stock

CMPLE - IR Emitter Extender Mini Stick-On Infrared Emitters Blink Eye, Remote Control Extension Cable 3.5mm 10 Feet

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Triple 3 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Triple Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock

Remote Control IR Repeater Extender Universal to Control Your Audio and Video Products Hidden in a Cabinet, in Another Room or Out of Sight. Included IR Blaster / IR emitter and IR Sensor

  • Already upgraded- with a Dual Freq IR Receiver for the latest in technology Audio and Video Control.
  • Kit includes - IR Distribution Block - Mini IR Receiver - (2) Dual IR Emitters - AC/DC Adapter.
  • Our IR Remote Extender is Simple to use - Controls 4 devices (expandable to a maximum of 12).
  • Easy - Easy to install for your Home Theater Control. Our IR extender can be set up in just minutes.
  • Everything you need is in the box to get up and running fast.
Check Stock

3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.

  • 【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
  • 【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
  • 【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
  • 【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
  • IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
  • 【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).
Check Stock

Sportsmax 2 Pack of Two Channel Folding Universal Rear Entertainment System Infrared Headphones Wireless IR DVD Player Head Phones for in Car TV Video Audio Listening

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with Connecting Blocks and Home Automation controllers.
Check Stock

URWOOW IR Repeater Hidden Infrared Remote Extender System 1 Receiver 4 Emitters Control Kit USB Adapter for Amplifier Cable Box Satellite TV Receiver CD Player DVD Player Blu-ray Player

  • -This IR Repeater Kit Allows You to Control A/V component by the Existing IR Controller, Control the IR Devices Between Two Rooms Such as Adjusting the Volume or Changing TV Channel..
  • -With 1 Receiver Picks up the Signal from the Remote Controller, the Receiver is with a Convenient IR Confirmation LED.
  • -With 4 emitters send the Signal to the A/V Components.
  • -34-60kHz Operating Range(Please Aim at IR Receiver when Using Remote Control).
Check Stock

TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV

  • An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look.
  • IR Repeater system allows you to Control home theater components located behind cabinet doors.
  • Included with the system is - IR Receiver (2 inches by 1/2 Inch).
  • Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches).
  • Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB.
  • Support up to six emitter output connections.
  • Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW.
  • If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end.
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock

TNP IR Emitter Extender Extension Cable 10 Feet - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 1 IR Eye Emitter

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD....
Check Stock

TV Guardian LT Dual Flashing Infrared IR Emitter Blink Eye Cable 6ft

  • Non visible (blinks only infrared light) high output version..
  • Includes 2 IR emitters "eyes" on one cable, allowing you to use both or save one for a replacement or a different device..
  • For use with the TVGuardian LT, Connecting Blocks, and Home Automation controllers..
  • New and improved double-sided clear adhesive tape included for attachment to IR window of controlled component..
  • Lead is terminated with a 3.5mm mono mini plug..
Check Stock