Top Sc Pneumatic Cylinder

Build 19 Piece Pneumatic Kits with Technik Parts Contains Air Pump, Piston Pressure Rod, Cylinder,Pneumatic Hose &More,Great for DIY, MOC Tech, Compatible with Lego

  • Custom MOC Tech Accessories: The kit contains 10 pneumatic accessories for a total of 19 pieces. There are 2 2x11 V2 cylinders, 2 1x11 V2 cylinder air pumps, 2 1x5 cylinder V2 pressure rods, 2 1x6 air pumps, 2 pneumatic switches, 2 pneumatic spring air pumps, 2 7L atmospheric pistons, 2 square floor air pumps , a 2m long pneumatic hose with 4mm outer diameter, 2mm inner diameter and 2 push rods. Note: Tube color is random..
  • The technical parts are well sealed and airtight. The quality of the parts is comparable to the famous Danish building blocks..
  • The MOC small particle building block kit is used to realize the hydraulic action at night and control the turning, grabbing, lifting and other functions of cranes, trucks, various engineering vehicles, military trucks, airplanes, robots and other models..
  • We know that a perfect building block starts with the quality of the raw materials. The pneumatic kits are made of high-quality environmentally friendly ABS materials, and the building block parts are smooth and polished, so that each part fits well and has a smooth and comfortable grip, which is not easy to loosen. Compatible with other brands of small particle blocks..
Check Stock

SierraComfort Standard 2-Section Electric Lift Massage Table, SC-3001, Black (SC-3001-BLACK)

  • Steel frame / 3" High Density Foam Deck / Water & Oil Resistant PU Leather Upholstery.
  • Adjustable Table Height with Electric Pedal Assist / Manual Adjustable Backrest with Pneumatic Gas Lift Assist / Wheel Casters with Locking Mechanism.
  • Tabletop Dimensions: Width 30" x Length 73" (Length w/ headrest installed: 85") / Height (Adjustable): 15.5" - 32.5".
  • Table Weight: 120 lbs. / Working Weight Capacity: 500 lbs..
  • Includes: Adjustable Face Cradle (SC-529), Face Pillow (SC-533).
Check Stock

MXBAOHENG Pneumatic Paint Mixer 13-66 Gallon 2500RPM Pneumatic Mixer Portable Industrial Ink Coating Mixing Tool Machine, with 4-INCH Galvanized Impeller

  • 【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
  • 【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
  • The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
  • the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
  • 【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
  • 【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..
Check Stock

New Foam Pad Replacement for Herman Miller Classic Aeron Chair Posturefit Lumbar Graphite/Black.

  • Listing is for a brand new never used CLASS 4 WITH 400N, office chair seat height adjustment pneumatic gas lift cylinder. 6.0" stroke (seat travel....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2")..
  • Cylinder for Size A, B and C Aeron Chair. offer 5 years replacement warranty..
  • Only Available for Aeron chair made between 1996-2012..
Check Stock

McAvory Storefront Door Commercial Mortise Lock Cylinder & Thumbturn Adams Rite Style Cam in Aluminum 1 Set

  • 1" Mortise Cylinder Sets Fit Adams Rite, Kawneer, Vistawall, & Most other Storefront Door Locksets.
  • Each Set Includes 1 Keyed Lock Cylinder & 2 Keys, 1 Thumbturn , Cylinder collars.
  • Standard 1-inch Length , Standard 1-5/32" Diameter Commercial Door Lock Mortise Cylinders.
  • For use with commercial Store Front Deadbolt, Hook Lock, and Deadlatch in Glass Doors with narrow aluminum Frame.
Check Stock

McAvory Storefront Door Commercial Mortise Lock Cylinder & Thumbturn Adams Rite Style Cam in Dark Brown 1 Set Random Keys

  • Mortise Cylinder Sets Fit Adams Rite, Kawneer, Vistawall, & Most other Storefront Door Locksets.
  • Each Set Includes 1 Keyed Lock Cylinder & 2 Keys, 1 Thumbturn , Cylinder collars.
  • Standard 1-inch Length , Standard 1-5/32" Diameter Commercial Door Lock Mortise Cylinders.
  • For use with commercial Store Front Deadbolt, Hook Lock, and Deadlatch in Glass Doors with narrow aluminum Frame.
  • Dark Brown (Duronotic) Finish, SC1 Keys (5 Pin C keyway).
Check Stock

Gas Cylinder Heavy Duty for Herman Miller Classic Aeron Chair as Replacement

  • Listing is for a brand new never used CLASS 4, office chair seat height adjustment pneumatic gas lift cylinder. 4.5" stroke (seat travel from lowest....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Length Compressed: 11.5" Fully Extended: 16" Travel: 4.5", Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2").
  • After install, If the chair can't lift normally. Two screws located near where the cable attaches need to be adjusted, see photo 2..
  • Cylinder for Aeron Chair Size A, B and C, offer 5 years replacement warranty.Only For Aeron chair made between 1996-2012..
Check Stock

Lock Cylinder , fits Schlage Commercial ND, AL, Deadbolt, Leverset, Knob Locks

  • DOES NOT FIT RESIDENTIAL LOCKS OR FIGURE 8. One Cylinder fits many brands & applications..
  • Pacific Doorware Brand. Fits Most Grade 1 & 2 Commercial Knob & Lever Locksets.
  • Fits Commercial Schlage Deadbolts, Knobs, Levers, etc. DOES NOT FIT RESIDENTIAL LOCKS.
  • 5 pin cylinder with empty chamber for a 6th pin.
  • Solid brass housing, includes 2 keys - Schlage SC1 (C keyway).
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

Mophorn Swivel Chair Base 28 Inch, Office Chair Replacement Base 320 Pounds, Office Chair Base 5 Inch Stroke Length, Replacement Chair Base with Bottom Plate Base Cylinder and 5 Casters

  • 【PREMIUM QUALITY】- The black office chair base contains thickened metal construction. 28 inch, 320lbs.
  • It is wear-resistant, anti-scratch, and anti-rust. 360-degree swivel action for easy transfer..
  • 【HEAVY-DUTY SEAT PLATE】- The seat plate has a fixed mounting hole, mounting hole distance: 10"/253. mounting hole distance wide: 6"/152 mm. It rated for up 320 pounds. The extended service life offered. The practical chair gas lift piston is ideal for various office chairs..
  • 【PNEUMATIC GAS CYLINDER】- The solid pneumatic gas cylinder provides a good load capacity of 320 lbs. It has a 5" travel from lowest to highest. The adjustable height of the cylinder: 4 inches (100 mm)..
  • 【ROLLING CASTER BASE】- The diameter of 5 casters is 60 mm. Each caster rated for up 110 lbs. The friction is small with noiseless function. The anti-skid caster is convenient to move. The damage to the floor reduced..
  • 【EASY TO ASSEMBLE】- It is extremely simple and convenient to install and operate. Complete accessories all parts you need under the seat are equipped..
Check Stock

AIsecure Brass Mortise Cylinder with 2 Keys for SC Keyway Standard Commercial Door Lock Cylinder Keyed Alike for Storefront Doors Lock Replacements, 2 Pack, Silver

  • 【Premium Quality with Satin Chrome Finish】This mortise door lock cylinder is made of premium solid brass with a shiny satin chrome finish..
  • 【Sturdy & Anti-Corrosion】The upgraded sturdiness and anti-corrosion feature ensures this mortise lock cylinder is more durable, secure, and strong for long-term use..
  • 【Universally Fit】This door lock cylinder is one of the most common see styles, suitable for most storefront commercial aluminum doors..
  • 【Size Information】1-Inch body length, including 5/16-inch stamped trim ring..
  • 【Package Includes】Brass Cylinder x 2, Matching SC Keyway Key x 2, Stamped Trim Ring x 2.
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock