Top Scope Mount Base

ohhunt 30mm Scope Mount Cantilever Scope Mounts for 30mm Tube Rifle scopes (Tan)

  • 30mm scope mounts with Torx Screws and Square-shaped Integral,Recoil Stops for a Secure and Repeatable Zero Hold..
  • Square-shaped Integral Recoil Stops Perfect fit Picatinny Rail,Slots(Not suitable for Weaver Slots)..
  • The 2.6-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief..
  • Scope mount with a base of 3 inches and 2.36 inches of spacing between the rings..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.57 inches (40 mm) from the base..
Check Stock

WestHunter Offset Cantilever Dual Ring Picatinny QD Scope Mount, 1 inch 30 mm Quick Release Scope Rings | Black

  • Position the center of the scope tube at a height of 1.42 in / 36 mm from the base.
  • The high profile QD cantilever scope mount fits for both 30mm and 25.4 mm (1 inch) tube optics with up to a 70mm outer objective diameter.
  • Scope mount with qick detach locks for Picatinny rail, can freely adjust the tightness of the base to ensure stability.
  • Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in anodizing.
  • Easy installation, perfect for shooters(Sold 1Pcs mount per package).
Check Stock

BKL 1in. Dia x 3in. Long Cantilever with 1-5/8in. Clamping Length, Black (BKL-253-MB)

  • ❖Heavy Duty:4 screw design with cut for weight reduction,weaver base mount with 2 top Slots Medium profile..
  • ❖Fit to All 20mm Rail:Tactical mount ring Medium profile with spirit level,1‘’/24.5mm diameter fit most scope and tactical flashlight..
  • ❖SeeThrough Design:See through design allow you to aim with the rifle's iron sight even with a scope installed..
  • ❖Exquisite Workmanship:Precision machined from aircraft-grade aluminum alloy with anodized black matte finish..
  • ❖Easy to Install:With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Jnrtifow Low Profile Picatinny Weaver Top Rail Scope Mount Base for Optics Scope Sight Adapter

  • Customizable fine level adjustment for perfect zero (up/down, left/right)..
  • Rear Sight Rail Mount 100mm Picatinny Weaver 20mm Scope Mount Base For Hunting Red Dot Optics..
  • Ultra light weight and low profile scope mount..
  • Feature: Fast and easy installation. Mount on standard 20mm weaver base -Constructed of Aluminum..
  • Specification：Hardcoat anodized 6061 aircraft aluminum. Recommended for use with low profile red dot.Integrated back-up rear sight. 3X M3 countersunk hex screws. 1X M3 round head screw..
Check Stock

Rear Sight Rail Mount for installing Low Profile Red Dot Optics Scopes

  • Converts your rear sight into a 1913 Picatinny rail allowing for mounting low profile optics For Hunting Red Dot Optics.
  • Feature: -Fast and easy installation. -Mount on standard 20mm weaver base -Constructed of Aluminum.
  • Quick 1 step installation. Ultra light weight and low profile red dot scope mount for rifles Reference aiming dots on rear to use scope mount rail as....
  • Accessories Rear Sight Scope Mount Rail Picatinny Weaver For Optics.
  • Specification： 1.Customizable level adjustment (up/down, left/right) . 2.Hardcoat anodized 6061 aircraft aluminum. 3.Recommended for use with low....
Check Stock

Durasight DS409B Dead On Mount

  • Dead On One Piece Ring/Base - Low Black 1"DescriptionDead On One Piece Ring/Base - Low, Black, 1"Manufacture ID: DS409BThis innovative design uses Z2 Alloy to make it the strongest mount available for your CVA rifle and scope. The DEAD-ON one-piece system is the fastest way to mount optics on your CVA rifle and will give you years of rock-solid performance. A one-piece system also means there are fewer parts than can come loose to affect your accuracy. Plus, the molded Z2 Alloy ensures better ring alignment to grip your scope tighter but with less stress on the scope tube.Specifications:- Fits CVA Apex, Optima Elite Center-Fire Barrels, New CVA Scout Rifle (all Models) and all 2010 or later Model CVA Muzzleloaders (Wolf, Optima, Accura V20Height: LowFinish: Black.
Check Stock

Arxus Travel Lightweight Waterproof Foldable Storage Carry Luggage Duffle Tote Bag (Gray)

  • Durable Material & Dimension: Carry handle rail mount adapter made of high strength Aluminum Alloy.Dimension?Length: 13cm (5.1 inch). Width: 2cm (0.79 inch). Height: 1.9cm (0.78 inch). Item Weight: 70g, Lightweight and Portable design..
  • 5.1" in Length with 6 Picatinny Rail Slots: Allows enough space for mounting of different sized optics and provides flexible eye relief adjustment..
  • Large Self-locking Thumb Knobs Nut: A unique self-locking thumbnut that fits snugly in the carry handle for continuous zero holds..
  • Easy Using: Drop-In and tighten the installation. 20mm Standard Weaver Base take any scope mounts. 6 slots tactical 20mm weaver scope base use for outdoor sport..
  • Package Contents: 1x Picatinny Rail with 6 slots, 2x Screws, Full Metal Scope Mount Base With QD Nut. Notice: Welcome to contact us if you have any question or concerns, our customer staff will help you to solve the problem as soon as possible..
Check Stock

Monstrum One Piece Scope Mount for Marlin 336/1894/1895 Series Lever Action Rifles | Low Profile | 1 Inch Diameter

  • Dedicated scope mounting platform built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Rings are 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Scope mount base installs directly to the Marlin factory mounting holes via the included set screws with no additional mounting hardware required.
  • Note that the low profile design may not accommodate scopes with large objective bells and that installation may require removal of your rear sight. Please measure scope mount dimensions against your scope before purchasing..
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

ToopMount Picatinny Rail Mount Picatinny Rail Mount 20mm Rail Scope Long Rail Mount Aluminum Scope Extension Scope Mount with Free Allen Wrench

  • Dimensions: Length:12cm (4.7 inch), width: 4cm (1.5 inch), height: 2.3cm (0.9 inch). 20mm weaver rail mounting for scope attachment..
  • High Quality Material: Our Picatinny rail Scope mount machined from aircraft-grade aluminum alloy, 50g net weight, light weight and durable material. Low profile for discreet and stealthy operations, hex nut to tighten the base onto receiver top..
  • Quick to Install: Clever locking clamp with spring retention for quick & easy attachment, easy to hook up. 20mm Standard Weaver Base take any scope mounts.
  • Package Include: 1 x picatinny rail mount set, 1 x allen wrench..
  • Buy with Confidence: Welcome to contact us if you have any questions or concerns about our Picatinny rail mount, our customer staff will help you to solve the problem as soon as possible..
Check Stock

Wheeler 1-Piece Bolt Action Scope Mount - 30mm High Scope Mount for Remington 700 Long Action Rifles - 6-Hole Design with Integral Rings and Anti-Cant Indicator for Leveling and Shooting

  • SPECS: This Wheeler 1-piece bolt action scope mount with 30mm rings in high height is compatible with Remington 700 long action rifles. Base features 6-40 threads.
  • ACCURATE: Finding the right height can help make your rifle more accurate. With 20 MOA, Wheeler 1-piece bolt action scope bases help zero in sights for shooting long distances..
  • CONVENIENT: Installation is easy with a 1-piece scope base. The flip-down anti-cant device can be posted on the front or rear ring to ensure a level mount..
  • DURABLE: A 6061 aluminum matte black base makes for a solid, yet lightweight design. Clamping force is increased with a 6-hole ring design..
  • EXPLORE: Caldwell offers a variety of 1-piece scope bases, including: Remington 700 short action, Remington 700 long action, Savage 10, and Savage 110 models..
Check Stock

Low Profile Scope Rings 1 inch – Rifle Scope Rings Scope Mounting Rings 1 Inch for Picatinny and Weaver Rails(2 Pieces)

  • The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails..
  • The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm)..
  • With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely..
  • Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g..
  • Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included..
Check Stock

Monstrum Lockdown V3 Picatinny Riser Mount with Recoil Stop Base | 5.5 inch Length | Low Profile | 20 MOA

  • Next generation Picatinny riser mount for optimal positioning of picatinny or weaver base scopes, red dots, or optics.
  • 5.5 inches in length with 13 Picatinny rail slots.
  • Picatinny base is equipped with custom recoil stop bolts that slot seamlessly into your Picatinny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • 20 MOA mount is angled downward at 20 MOA providing a higher range of elevation adjustment when zeroing your scope. It is suitable for zeroing your scope at long distances..
  • All Monstrum mount and accessory products come with a lifetime warranty.
Check Stock