Top Scope Mount For Ar1flat Top

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

Modkin 1'' Dovetail Scope Rings, Medium Profile Scope Mounts for 11mm Dovetail Rails - 2 Pieces (One has Stop pin)

  • ✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment..
  • ✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'')..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 30 mm Diameter

  • Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes.
  • Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Mounts to any flat top Picatinny rail equipped rifle platform.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
Check Stock

BKL 1in. Dia x 3in. Long Cantilever with 1-5/8in. Clamping Length, Black (BKL-253-MB)

  • ❖Heavy Duty:4 screw design with cut for weight reduction,weaver base mount with 2 top Slots Medium profile..
  • ❖Fit to All 20mm Rail:Tactical mount ring Medium profile with spirit level,1‘’/24.5mm diameter fit most scope and tactical flashlight..
  • ❖SeeThrough Design:See through design allow you to aim with the rifle's iron sight even with a scope installed..
  • ❖Exquisite Workmanship:Precision machined from aircraft-grade aluminum alloy with anodized black matte finish..
  • ❖Easy to Install:With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

ApexHorizon Scope Rings Optic Mounts - Titanium Alloy Scope Rings 30mm for Picatinny Rail, Tactical Heavy Recoil Rifle Scope Rings Precision Mounts Rings (Scope Rings 30mm Mount)

  • Titanium Alloy Scope Rings: Made of titanium alloy and precision-machined aircraft-grade 6061 aluminum alloy. Titanium alloy mounting part is high solidity, shockproof, anti-shake, anti-corrosion, and wear resistance. A reliable material to make sure your scope is precisely and firmly mounted on Picatinny rail..
  • 30mm & Medium Profile: Set of 2 scope rings are both 1.18 inch/30mm diameter. 40in/Ibs ring torque, 2 screws for rail clamping, and 4 screws on top to ensure your rifle scope reaches alignment. Mount on rail easily, stay aligned, and without any wobble. Removed or installed quickly by using Allen key..
  • Rings for Picatinny Rail: The optic rings fit for standard Picatinny rail. The recoil control key holds the scope rings perfectly still and will not shift or move under fierce recoil. By utilizing titanium alloy on the clamping base, the scope rings achieve a way longer service life than similar scope rings and work perfectly under extreme environments..
  • Professional Choice: The scope mount rings are heavy duty style yet lightweight so that it withstands heavy recoil and does not add up extra weight. Each ring is about 81g. Perfect for outdoor hunting, tactical and precision target practice..
  • 2-Piece Scope Rings Design: Different rifle scope has a ....
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

wipboten Optic Scope Rings Medium Profile Scope Mounts for Picatinny/Weaver Rail

  • Double scope ring mount for 11mm dovetail mounts..
  • One of the dovetail rings features a stop pin, for rock solid application..
  • High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch)..
  • The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube..
  • With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount - 2-Inch Offset , black

  • This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle..
  • The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle..
  • This mount positions thecenterof the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base..
  • The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish..
  • Weighs 8.9 ounces. Made with pride in the USA.DescriptionVortex Precision QR Cantilever Mount 30mm 2" offset::Set your sights on the best. The Vortex Precision QR Cantilever Mount is a quick-release cantilever mount that's designed for mounting telescopic sights. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement. Take the performance to a new level with Vortex..
Check Stock

MIZUGIWA 1 Inch Scope Mount Rings High Profile 11mm Dovetail See-Thru

  • 3/4 inch gap between tube and top of rail.
  • With four screws Design, Double stability.
Check Stock

ToopMount Picatinny Rail Mount Picatinny Rail Mount 20mm Rail Scope Long Rail Mount Aluminum Scope Extension Scope Mount with Free Allen Wrench

  • Dimensions: Length:12cm (4.7 inch), width: 4cm (1.5 inch), height: 2.3cm (0.9 inch). 20mm weaver rail mounting for scope attachment..
  • High Quality Material: Our Picatinny rail Scope mount machined from aircraft-grade aluminum alloy, 50g net weight, light weight and durable material. Low profile for discreet and stealthy operations, hex nut to tighten the base onto receiver top..
  • Quick to Install: Clever locking clamp with spring retention for quick & easy attachment, easy to hook up. 20mm Standard Weaver Base take any scope mounts.
  • Package Include: 1 x picatinny rail mount set, 1 x allen wrench..
  • Buy with Confidence: Welcome to contact us if you have any questions or concerns about our Picatinny rail mount, our customer staff will help you to solve the problem as soon as possible..
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock