Top Screw Jacks base Plates

VIAIO Barbell Jack, Effortless Loading/Unloading Barbell & Plates，Bear at Least 1000 Pounds, Small and Portable, Durable, Perfect for Grip Plate, Weight Plate, Bumper Plate, Strength Training Plate

  • [EFFORTLESS LOADING/ UNLOADING BARBELL] VIAIO dead wedge are the creative substitutes of the hard pull jacks, let you can load/ unload easily. We design them to make you easiler to change the weight plates, not waste your precious exercise time..
  • [SIMPLE TO USE] VIAIO Deadlift wedges are very simple to use. Only put the deadlift wedges on the ground, then scroll the bumper plates to the deadlift wedge. It will lift the barbell 0.5 inch high from the ground. So you can easily load or unload the bumper plates..
  • [MULTIFUNCTION] VIAIO bar jacks have many uses. They can be used to load/unload trap bars, Olympic barbells to perform regular or deficit deadlifts on the ground or on the boxes. And they are suitable to any plates, including bumper plate, cast iron plate, hexagonal plate, etc..
  • [PORTABLE & DURABLE] Unlike the large, clumsy stiff-pull jacks, VIAIO barbell jack is small, portable. You can take them out and use them when you go to different workouts. They are the perfect fit for your gym bag, and they doesn't take up much space..
  • [HIGH QUALITY MATERIAL] VIAIO deadlift wedge pairs are made of durable, stable, Nontoxic and light rubber material. We have tested them on over 1000 pounds weight. We offer 7 days * 24 hours one-to-one customer service. If yo....
Check Stock

LOFINDAR 12'' Acrylic Crystal Cake Stand, Back cake stand, Round Cake Stands, Metal Dessert Cupcake Pastry Candy Display for Wedding, Event, Birthday Party

  • NOT flimsy !!! Pull out the rod and press hold the base plate then screw tighten it !!! If you install and feel not stable, it is because the rode is not right used. We have videos for the installation, if still have problem please contact us!.
  • Premium Quality - Made of iron, heavy top quality black cake stand with acrylic pendant. Exquisite craft, welding and finishing, durable and environmentally-friendly..
  • Size: The price is one stand, 11.81 inch/30cm diameter plates, all stand at 12.6 inch/32cm height..
  • How to install ? Screw the center rod in to base, Place the central pillar over the screw rod,Make sure the right way up,Screw the pedestal foot onto the screw rod. Note : The screw is long enough, Please hold the base with your hand and then screw tight.
  • The metal cake stand holder set is exquisite for weddings, birthday party, baby shower, anniversary, afternoon tea and any other romantic occasions, can be applied for home decoration, cakes, candies, fruits, also is an elegant choice for gifts.
Check Stock

Abba Patio 4Pcs Offset Umbrella Base Plastic Cantilever Base Weights Plate Set Water&Sand Filled Umbrella Base for Cantilever Offset Patio Umbrella 180lb Black

  • 4 pc Weight Set for Offset Cross Base: The 4 triangular shaped black weight plates are designed to fit in a cantilever umbrella cross base and give....
  • Easy to Fill: Purchase Sand and use the included plastic funnel to fill each section with dry or wet sand. Screw the cap on and you have weight for....
  • 150 lbs to 180 lbs of Weight: When all 4 plates are filled with just sand the weight is approximately 150 lbs. With water added to make wet sand, the....
  • Location Flexibility: By filling these weight plates and securing them on a cross base, you can put your offset umbrella in any location you want. It....
  • Durable Plastic Construction: Each of the 4 black plates are made from heavy-duty plastic that are weather resistant, UV protected and waterproof.....
Check Stock

LOFINDAR 10'' Acrylic Crystal Cake Stand, Back cake stand, Round Cake Stands, Metal Dessert Cupcake Pastry Candy Display for Wedding, Event, Birthday Party

  • NOT flimsy !!! Pull out the rod and press hold the base plate then screw tighten it !!! If you install and feel not stable, it is because the rode is not right used. We have videos for the installation, if still have problem please contact us!.
  • Premium Quality - Made of iron, heavy top quality black cake stand with acrylic pendant. Exquisite craft, welding and finishing, durable and environmentally-friendly..
  • Size: The price is one stand, 9.84 inch/25cm diameter plates, all stand at 8.46 inch/21.5cm height.Premium Quality - Made of iron, heavy top quality black cake stand with acrylic pendant..
  • How to install ? Screw the center rod in to base, Place the central pillar over the screw rod,Make sure the right way up,Screw the pedestal foot onto the screw rod. Note : The screw is long enough, Please hold the base with your hand and then screw tight.
  • The metal cake stand holder set is exquisite for weddings, birthday party, baby shower, anniversary, afternoon tea and any other romantic occasions, can be applied for home decoration, cakes, candies, fruits, also is an elegant choice for gifts.
Check Stock

IOUALEY 2 Pack 41mm and 43mm Tripod Quick Release Plate Camera Mounting Adapter, 2 Sizes QR Release Camera Tripod Ball Head Parts Replacement Compatible with Ambico Sunpak Kalimar Zomei Tripod Mount

  • 41 mm Black Tripod Quick Release Plates: Length 45mm (1.77") x Width 41mm (1.61") x 12mm(0.47"), Bottom Size: 41mm (1.61") x 41mm (1.61"). Compatible with Ambico V-0550, V-0551, V-0552, V-0553, V-0554 (fluid type head only), Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-Tech V-40 etc..
  • 43 mm Black Tripod Quick Release Plates: Length 65mm (2.6") x Width 51mm (2") x 15mm(0.59"), Bottom Size: 43mm (1.69") x 43mm (1.69").Compatible with CX-444, CX-888, CX-460, CX-460mini, CX-470, CX-570, CX-690, DF-50, VCT-D580RM, VCT-D680RM, VCT-R640,Torjim 60-Inch AX60, 67", Endurax 66" ETR66, 67", UBeesize 60-inch TR60, KingJue KingJoy 60" VT-860, Victiv 72" T72, Zomei Q111, Jolican 65" H65, Mactrem PT55 tripods etc..
  • Premium Material: The camera mount adapter plates is made of premium PVC material. The middle anti-twist locking screw is made of aluminum material. The surface is finely oxidized, durable and strong. With standard 1/ 4 inch screw, and the screws on the quick release mount bottom could help you install faster..
  • Easy to Install: According to the card position of the Pan/ Tilt/ Zoom, you could insert the mount quick release plates directly for installation. You could adjust the slotted screw with your fingers or tools. The quick release tripod mount adapter could ....
Check Stock

2 Pieces 41 mm QR Release Plate Camera Tripod Ball Head Quick Release Plate Replacement Compatible with Ambico V-0552 V-0554, Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-tech V-40

  • Package content: 2 pieces of 41 mm black tripod quick release plates which are compatible with Ambico V-0550 V-0551 V-0552 V-0553 V-0554 (fluid type head only), Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-Tech V-40, and so on.
  • Good workmanship: the camera mount adapter plates are made of PVC material and the middle anti-twist locking screw is made of aluminum material.
  • The surface is finely oxidized to give it a long service life, so you can use these camera mount adapter with confidence.
  • Standard anti-twist locking screws: these ball head quick release plates are equipped with standard anti-twist locking screws which conform to international standards, compatible with the standard for camera tripod ball heads.
  • Easy to install and remove: the quick release plates can be fixed to the camera base, which can save your time and facilitate the installation and disassembling of the tripod, easy for you to use.
  • How to install: depending on the card position position of the Pan/ Tilt/ Zoom, you can insert the tripod quick release plates directly for installation.
  • The quick release plates have a slotted screw that you can tighten with your fingers or coins.
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....
Check Stock

Cable Matters 10-Pack Low Profile 4-Port Cat5e, Cat6 Keystone Jack Wall Plate in White

  • 4 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
  • Accepts many types of keystone jacks including RJ45 Cat 6 Ethernet, HDMI, RG6 coax, banana plug, and more.
  • Single gang cover plate fits a standard-sized receptacle with the included mounting screws.
  • Add a new patch cable location using a low voltage mounting bracket.
  • Low profile cable wall plate with a cover that is almost flush with the wall.
  • Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.
  • Cost effective 10 pack of keystone jack wall plates provides enough outlet plates for a few renovation projects at home or in the office.
  • UL listed keystone jack (E486099) wall plate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic construction.
Check Stock

SteadyFast Made in USA, Stabilizer System for 5th Wheel, Travel and Camper Trailers Without Auto Leveling - 4 Foot Plates- Item B

  • Stabilize your Trailer in less than 60 Seconds. Made in USA System Stabilizes Parked Travel, Camper, or Fifth Wheel Trailer.
  • Trailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates plus two additional so all jack footplates will match..
  • Installs Permanently so there is nothing to setup or store. Approximately 2-3 hour install...
  • Works on both 5th Wheels and Travel Trailers with existing stabilizer jacks. If you have an Auto Leveling system Please check out our Item C..
  • Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks.
Check Stock

Akron Products C-3 Adjustable Floor Jack

  • MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
  • VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
  • STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
Check Stock

TNP Banana Jack Keystone Insert 5 Pack - Speaker Banana Connector Socket Female Port Screw Type Binding Post Snap in Adapter Inline Coupler for Wall Plate Outlet Panel White

  • Banana jack keystone insert with red ring color code label connects a speaker cable with a banana plug connector to in wall speaker wire.
  • Screw type binding post with adjustable thumb screws can be used with banana plugs or bare wire.
  • Keystone insert with a red ring label connector on....
  • Keystone jacks and wall plates are used to create a cleaner less cluttered media room when running wiring in-wall.
  • Snap in construction of keystone inserts provides a secure connection.
  • Re-usable keystone jack inserts can be easily disconnected and relocated when....
  • Removable keystones offer an alternative to fixed wall plate binding posts that are not replaceable if damaged.
Check Stock

DUTRIX Glock Tool Kit,Front Sight Tool Magazine Disassembly Tool Mag Plate Removal Tool Pin Punch Tool for Glock 19 17 26 27 43 Accessories

  • COMPATIBILITY: DUTRIX Black glock tool set compatible with Standard Glock 9/40 Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41. Please note: Our tool kit does not work on the Glock 30 round magazines or extended type base plates.
  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and mag bodies..
  • Front Sight Tool: Magnetized tool to aid in the installation and removal of front sights on Glock pistols.It is long enough to get a grip to remove the sight..
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.It is a good tool kit for Glock pistols, even handles well in smaller hands making it handy for women..
  • Easy to Remove and Install: An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or Installation.Easy to carry,They can be carried in a pocket, perfect fit for travelling or on the road.1 Years Warranty: 100% Satisfaction Guarantee.
Check Stock