Top Sensor Switch

FIYO Motion Sensor Light Switch, 180 Degree PIR Sensor Light Switch Outdoor Infrared Motion Sensor LED Security PIR Infrared Sensor Detector 90~250V Grey

  • 【 BODY SENSOR 】This motion sensor detector switch utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once.
  • 【 OUTDOOR SENSOR LIGHT SWITCH 】The adjustable PIR sensor head has an exquisite design, high sensitivity and stable performance. Waterproof and weatherproof, also suitable for outdoor use.
  • 【 RUN AUTOMATICALLY 】Motion sensor can identify day and night automatically, motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (5s to 6minutes).
  • 【 WIDE DETECTION RANGE 】This motion sensor detector inductor switch has wide detection range, made up of up and down, left and right service field. The detection distance, ambient light and delay time can be adjusted according to your actual needs.
  • 【 WIDE APPLICATION 】Our security PIR infrared sensor detector is easy to install, suitable for corridor, hallway, garage, patio, toilet and anywhere needed.Automatic, convenient, safe and practical.
Check Stock

Car Coolant Control Valve for Toyota Prius 2004‑2009,ABS Cooling Radiator System OEM:16670‑21010

  • ★【Suitable Case】Our car coolant temperature sensor switch can fit for most cars. Reference OEM number: 37760-P00-003/37760-P00-004/5862028390/TS295..
  • ★【Features】The car coolant temperature sensor switch can helps keeping the engine operating at proper temperature, which is greatly improved the driver's safety factor..
  • ★【Premium Material】This Engine Radiator Coolant Fan Water Temperature Sensor Switch made by quality plastic and brass material, which is wear resistance and high strength, impact resistance and anti-rust. It's durable to use and can maintain a long lifespan..
  • ★【Best Replacement】Aftermarket coolant temperature sensor switch, direct replacement for the old one, which is stable characteristics, high reliability.Easy installation, perfect match to the original car..
  • ★【Service Guarantee】We offer 100% perfect customer service. If you have any questions, please do not hesitate to contact us. We will do our best to help you solve your problem..
Check Stock

TOPGREENER Dual Tech Humidity Sensor Switch, Infrared PIR Motion & Air Moisture Detection, Bathroom Fan & Light Control, Adjustable Timing, Neutral Wire Required, UL Listed, TDHOS5, White

  • FAN TIMER SWITCH Dual-tech in-wall humidity control switch that controls both bathroom fan and light simultaneously. Dual technology of passive infrared (PIR) motion sensor switch and humidity sensor switch for fan. Automate light and exhaust fan control to keep you hands-free..
  • BATHROOM FAN OCCUPANCY DETECTOR Converts bathroom ventilation fan control wall switch with this smart humidity control switch, turning fan ON automatically when humidity exceeds preset level and turning OFF as it drops to normal to eliminate excess humidity.
  • HUMIDITY SENSOR SWITCH features simple controls and operates in two modes: Occupancy Mode (auto on/off lights, auto on/off fan), and Vacancy Mode (manual on/ auto off lights, auto on/off fan). Adjustable time delay and humidity level.
  • MOTION SENSOR Two single pole switches to control bathroom light and fan separately.
  • Energy savings of up to 40% with motion sensing control.
  • 4 time delay settings from 15 sec to 30 min.
  • 120VAC, 3A fan/motors, 500W incandescent/halogen, 150W CFL/LED.
  • Up to 600 sq.ft coverage, 180 degree field of view.
Check Stock

CQRobot Ocean: Contact Water/Liquid Level Sensor Compatible with Raspberry Pi/Arduino. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc.

  • Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications..
  • The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability..
  • This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function..
  • The sensor has a DIP switch. The DIP switch controls the output voltage (high level) of the signal terminal (green line). When the DIP switch is dialed to 5V, the high level is 5V. When the DIP switch is dialed At 3V, the high level is 3.3V..
  • Compatible with Arduino motherboard and Raspberry Pi motherboard. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc..
Check Stock

SixBuys 5 PCS LJC30A3-H-J/DZ 2wires NC capacitive Approach Proximity Sensor Switch 25mm AC 90-250V

  • we are the professional proximity sensor switch manufacture.we produce all kinds of proximity sensor switches.we are so glad that you can contact us if you don't find the types that you need..
  • capacitive proximity sensor switch can detect any dielectric..
  • Set distance：0-18mm.Non-Shield Type.Normal close..
  • You will receive:5 pcs capacitive proximity sensor switch LJC30A3-H-J/DZ ..
Check Stock

Baomain Approach Sensor Proximity Switch PL-05N DC 10-30V 200mA 5mm Inductive Detector NPN NO

  • LJ12A3-4-Z/AY (PNP NC) inductive proximity switch.
  • Wire Type : DC 3 Wire Type (Black, Brown, Blue).
  • LJ12A3-4-Z/AY inductive proximity switch supply voltage : DC 6-36V.
  • M12 approach sensor theory: Inductive Sensor.
  • Inductive proximity switch sensitive detection: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • LJ12A3-4-Z/AY application: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is widely used in mechanical automation, 3D printer probe bed leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc..
Check Stock

TOPGREENER TDOS5-W Motion Sensor Light Switch, PIR Sensor Switch, Occupancy Sensor Light Switch, Motion Sensor Wall Switch, 500W 1/4HP, Neutral Wire Required, Single Pole, White

  • Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room.
  • Motion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements.
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs.
  • Delay times: 15 sec (Test), 10 min, 20 min, 30 min. Adjustable range.
  • NEUTRAL WIRE REQUIRED, 1,200 square feet coverage, 180 Degree View.
  • 120VAC, 500W Incandescent, Halogen, Fluorescent, LED, CFL, Works with all bulb types. Single Pole Only. Wall plate sold separately.
Check Stock

Motion Sensor Light Switch, PIR Infrared Motion Activated Wall Switch, Neutral Wire Required, Single Pole for CFL/LED/Incandescent Bulb, Wall Plate Included, UL Listed

  • NEUTRAL WIRE REQUIRED：The sensor can work normally only when all 4 wires (including the neutral wire) are connected.The indicator light will flash if it is not connected properly.Therefore, please confirm the wiring before you purchase. We recommend consulting a licensed electrician before purchasing to ensure that the product can be installed and compatible correctly..
  • TWO MODES ARE AVAILABLE：Occupancy (OCC) Mode: Automatic(auto on, auto off with auto set mode) and vacancy (VAC) Mode: Semi-automatic(manual on, auto off) ，allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused devices are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring devices are turned on only when needed with a motion sensor switch..
  • VERSATILE SETTINGS: The Light switch sensor features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing..
  • WORRY-FREE RETURNS：For whatever reason, as long as you are not satisfied with our products, please contact us immediately for a full refund.No hassles, no delays..
Check Stock

2-Pack, Dusk to Dawn/Day Night Sensor, Photoelectric Switch, Photo Cell Sensor, 110V/120V/220V/240V Input, UL Listed, IP65 Water-Resistant, Photocell for Outdoor Light

  • DUSK TO DAWN PHOTOCELL SENSOR SWITCH -- This photocell sensor switch will automatically turn on lights at dusk and off at dawn. No need for manual operation anymore. The delay feature in the outdoor light sensor prevents the accidental triggering off the light due to the headlights of a passing car or lightning..
  • MULTI VOLTAGE SWIVEL PHOTOSENSOR -- Handles between 120V and 277V and compatible with LED, CFL, fluorescent, incandescent and other types of bulbs, so you can use this photoelectric switch sensor in most various occasions such as outdoor lighting, exterior lighting, street lighting, passage lighting, and doorway lighting..
  • UL LISTED PHOTOCELL LIGHT SENSOR -- Covered with UL certificate, surge protection available, heavy-duty body, P65 Water-resistant, AC 120-277 input voltage, 50/60Hz, threaded diameter 1.06 inch, 5-20Lx on and 20-60Lx off operate level..
  • EASY TO INSTALL -- With a swivel mount, this outdoor light controller can be easily installed it at a precise spot focusing light. Just disconnect power, place screw thread of the SWITCH in the knockout hole and fasten with rubber gasket and zinc alloy lock-nut..
  • RELIABLE QUALITY AND SERVICE -- UL listed, 3 year warranty available. Please feel free to contact us for refund or replacement if you....
Check Stock

Sensky SK037 3-12M 360 Degree Ceiling Occupancy Sensor PIR Motion Sensor Switch High Sensitive Motion Sensor Light Switch(110V-240VAC)

  • 【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements..
  • 【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night..
  • 【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, the delay time controls how long the light stays on once the ceiling motion sensor gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【DETECTION RANGE ADJUSTABLE】 - 3-12m adjustable, the sensor switch can be adjusted according to your demand. The ceiling occupancy sensor both fits for small room and large room..
  • 【PIR MOTION SENSOR】 - Working by detecting human movement(or heat source), the motion sensor switch is widely used on LED light, compact fluorescent lamp, incandescent lamp, ceiling light, exhaust fan....
Check Stock

Power A Wii Wireless Ultra Sensor Bar CPFA000377-01

  • PERFECT REPLACEMENT: Our compatible sensor bar can be used with Nintendo Wii and Wii U consoles, it is a great replacement if your original sensor bar is lost, broken or damaged..
  • COMPLETELY WIRELESS: You don't have to worry about excess cable clutter. The IR field created by the wireless sensor bar allows for play up to 10 feet away, and that's ideal replacement sensor bar for Wii and Wii U, which can able to work on any TV as long as your Wii can connect to the TV..
  • EASY TO INSTALL: Equipped with 4 AAA batteries comes with the sensor bar, come with a holder, tear off the sticky tape on the holder to attach to TV, monitor or any smooth surface..
  • SAFE TO USE: 4 AAA batteries (included) can provide up 30 hours of use, it will audible alarm warns and even automatically shut off the device when powered for too long, please turn on the switch when you use it and turn off the switch when not use it..
  • PORTABLE WII SENSOR BAR: Easily attachment to TV, You can place the sensor above the TV or below the TV..
Check Stock

Lidar Sensor, Body Sensor Module, 60Ghz Motion Detection Sensor Radar, Microwave Human Presence Detection Sensor Module, Body Motion Sensor for Smart Home R60ABD1

  • 【High quality】The sensor switch module is made of high quality material, durable and long service life, high quality and good workmanship, easy to install.
  • 【Anti-Interference】The sensor switch board has 5.8G frequency, normal installation and use do not interfere with each other, high stability and strong anti-interference ability.
  • 【Characteristic】The sensor switch module has compact design, small size, easy to carry and store, convenient to use and with good performance， suitable for various products requiring DC microwave modules.
  • 【Wide range】The microwave / radar sensor switch has sensing distance is 12 meters directly in front, and the sensing angle is wide, accurate manufacturing makes it has stable performance, dependable to use.
  • 【Quality After-Sales Service】If you have any questions, do not hesitate to contact us. We will have a team of professionals to answer your questions and answer you within 24 hours. Thank you for choosing our store.
Check Stock