Top Servo To Signal Generator Board

X100D Multi-Function calibrator Output 4-20mA Current ; Voltage ;PT100;K E J T R B S N ;Product Does not with Batteries; Batteries Need to be Purchased Separately

keenso Servo Signal Reverser, RC Model Aircraft PCB 5.0-6.0V Operating Voltage Servo Signal Reverser

• Change direction of rotation : Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
• Stable performance : High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
• Durable to use : The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life..
• Perfect workmanship : Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
• Compact size : Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere..

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

• Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
• Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
• Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
• Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
• Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.

XCFDP 15MHz DDS Signal Generator Counter,High Precision Dual-Channel Function Generator Arbitrary Waveform Frequency Meter 2.4’’ Screen 200MSa/s 15MHz

• 【EASY TO OPERATE】Convenient operation interface, superior technical indicators and humanized graphic style. Its sine wave frequency output can....
• 【SIGNAL STABILITY】The signal generator adopts large-scale FPGA integrated circuit and high-speed MCU processor, and the internal circuit adopts....
• 【FREQUENCY METER FUNCTION】It supports scanning output from low frequency to high frequency or from high frequency to low frequency. The scanning....
• 【HIGH PRECISION】This signal generator adopts dual-channel DDS signal and TTL electric level output to generate accurate, stable, low-distortion....
• 【WIDE APPLICATION】The signal generator has excellent amplitude-frequency characteristics, small and beautiful appearance, and intuitive control....

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

• [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
• [Interface type] This SG90 servo is compatible with JR & Futaba interface.
• [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
• [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.

BotBrain Robotics Control Board

• Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
• Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
• Holes on side on the side of the board bolt to Merkur parts.

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

• Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
• Abundant quantity and diverse styles that can meet your various needs.
• Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
• Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
• Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
• The interior is made of tinned copper, which has a good transmission and low resistance.
• Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

• 3-Pin JR plug male to male connector servo extension lead wire cable..
• There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
• Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
• Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

• You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
• Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
• Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
• Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
• Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.

(5PCS) ICS91730AMLFT IC CLOCK GENERATOR LOW EMI 8SOIC 91730 ICS91730

• PLL and divider :The chip of this signal generator has a 25MHz accurate reference voltage source, and has a PLL and frequency divider inside, so it can generate almost any frequency..
• three independent outputs :The signal generator has three independent outputs, and each output can have a different frequency..
• 3.3V LDO regulator :This convenient small chip has a 3.3V LDO regulator and can be powered by 3-5VDC..
• level shift circuit :There is a level conversion circuit on the I2C line. Generally speaking, you can safely use the chip at 3V or 5V..
• sleep function :The signal generator has a sleep function, which can reduce power consumption and is very economical and environmentally friendly..

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

• Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
• Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
• 2.You should connect higher power supply for higher-power servo.
• 3.Make sure servo are connected properly, otherwise they will not move..
• Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
• Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
• Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
• Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..

Miuzei 20KG Servo Motor High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot, DS3218 Control Angle 270°

• DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely..
• High torque steering servo for robot arm,boats,vehicles and remote control toys..
• Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec.
• Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66.
• Please Note: To use a 20kg steering gear, you need to ensure the correct line connection, provide 500~2500usec pulse signal, meet the power supply voltage of 4.8V~6.8V.
• when the input signal reaches 2500usec, the angle rotates to 270 degrees).