Top Servo To Uart Converter Board

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

  • Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
  • Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
  • Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
Check Stock

DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL

  • Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is....
  • FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip.The DSD TECH brand never uses cheap fake chips..
  • Not only provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins.
  • Protective case: Come with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent....
  • WARRANTY:DSD TECH back this FTDI FT232RL USB to TTL UART adapter with 12 months warranty.If you meet any question, please contact us, we will fix your....
Check Stock

2Pack PL2303 PL2303HX USB to TTL Serial Adapter 3.3V Debug Cable USB to RS232 TTL Converter 4 Pin Female Socket Download Cable PL2303HX Cable

  • Specific Interface A: USB 2.0 type A Male Port.
  • Interface B: 4 pin Female Socket flying leads. Prolific chipset on the PCB board....
  • USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND(ground), RX and TX at....
  • TTL to USB Converter Support Windows XP/Vista/7/8.
  • Ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash....
  • Application:PL2303 USB to TTL serial adapter is designed to be used for USB to TTL electronic projects, easy to connects devices with 3.3 V logic....
  • Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the....
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

Ingcool GSM/GPRS/GNSS Bluetooth HAT Expansion Board for Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero W/ Zero, Based on SIM868 Module Supports SMS, Phone Call, Global Position, Transfer Data, etc.

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning. Bluetooth 3.0, supports data transferring through Bluetooth.
  • SIM card slot for 1.8V/3V SIM card, Supports SIM application toolkit: GSM 11.14 Release 99.
  • Baudrate auto detection (1200bps ~115200bps). Onboard USB TO UART converter for UART debugging. 6x LEDs for indicating the module working status. RTC with backup battery holder.
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

  • Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
  • Abundant quantity and diverse styles that can meet your various needs.
  • Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
  • Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
  • The interior is made of tinned copper, which has a good transmission and low resistance.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

Ingcool 4G / 3G / GNSS HAT Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano Based on SIM7600A-H 4G Support 4G Connection,LTE CAT4 for Downlink Data Transfer,

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,Onboard USB interface, to test AT Commands, get GPS positioning data, and so on,Onboard CP2102 USB to UART converter, for serial debugging.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32，SIM card slot, supports 1.8V/3V SIM card.
  • This Product mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Onboard audio jack and audio decoder for making telephone call，Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper，2x LED indicators, easy to monitor the working status.
  • Supports SIM application toolkit: SAT Class 3, USAT，Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

【1000Hz Electronic Compass+Tilt Sensor】WT931 High-Performance Acceleration+Gyro+Angle +Magnetometer with Kalman Filtering, MPU9250 Vibration IMU with Evaluation Board (IIC/TTL), for Arduino and More

  • 【 High Performance 】Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle+ Magnetic field+Quaternion, measurement range and output rate ( 0.2-1000Hz) selectable.
  • 【 Robust Design 】 Cortex-M0 core processor, highly-integrated MEMS, and Kalman Algorithm combine to deliver measurement accuracy at 0.05 degree(X, Y-axis), small in size, diverse interface, professional for customer's integration project.
  • 【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy.
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com.
  • 【 What You Get 】1 x WitMotion WT931 TTL Accelerometer sensor+ 1 x Evaluation Board +1 x Welcome guide (USB-UART converter not included ).
Check Stock