Top Shaded pole Geared Motor

Whitfield Combustion Blower Exhaust Fan Motor 12056010

Fits Models: ~ Advantage I – WP2 ~ Advantage II – WP2 ~ Advantage II-T – WP2 ~ Advantage II-T Classic – WP2 ~ Advantage III – WP2 ~ Advantage Plus – WP7 ~ Explorer – WF1 ~ Frontiersman – WF2 ~ Legend – WP1.
Top Quality Shaded Pole Motor Replacement – Use Your Existing Housing and Save!.
3000 RPM, Clockwise Rotation 120V AC, 60Hz.
Includes 4 3/4″ Fan Paddle Impeller & Mounting Gasket.

Fits Models: ~ 25-PDV ~ 25-PDVC ~ 25-PDVE ~ 25-PI ~ 25-EP ~ 25-EPI ~ 25-PAH ~ 25-IP ~ 25-IPM ~ 25-IPS ~ 25-PAF ~ 55-SHP22 ~ 55-SHP20 ~ 55-TRP22 ~ 55-TRP20 ~ 55-SHP22L ~ 55-SHP10 ~ 55-SHP10L ~ American Standard ~ American Heritage ~ 55-TRP10 ~ 55-SHPEPI ~ 55-SHPEP ~ 55-TRPEPI ~ 55-TRPEP ~ 55-SHPEPIL ~ 55-SHPEPL ~ 55-SHPEP ~ 55-SHPAH ~ 55-SHPAHL ~ 55-TRPAH ~ 55-SHPIP ~ 55-SHPIPL ~ 55-SHPIPM ~ 55-SHPIPS ~ 55-TRPIP ~ 55-TRPIPM ~ 55-TRPIPS ~ 55-SHP15 ~ 55-SHP25 ~ 55-TRP25.
Top Quality Englander Direct Replacement Shaded Pole Motor for Part # PU-076002B.
3000 RPM, Clockwise Rotation. 120V AC, 60Hz.
Exclusive 1 Year manufacturer warranty with our no hassle replacement guarantee.

BUILT TO LAST: continuous duty motor with thermal overload protection, epoxy-coated cast iron housing, upper and lower bearings, corrosion resistant steel motor shaft, and non-clog impeller help ensure a long pump life.
CONTINUOUS DUTY MOTOR: shaded pole 1/3HP motor with thermal overload protection.
MULTIPLE FITTINGS: 1-1/2-inch FNPT discharge.
1-1/4-Inch FNPT adapter and 3/4-inch garden hose adapter included.
MANUAL PUMP: ideal for sump pump systems with a separate switch, emergency water removal applications or water transfer applications.
1-1/2-inch FNPT discharge with adapters included.

Cleated positraction belts combine with new geared hand wheel pulley, geared reduction pulley and geared motor pulley to eliminate slipping.
Special heavy duty motor attached up to 150 watts, 1.5 amps, twice as much as home sewing machines.
High lift walking foot with 1/4" clearance underneath the foot.
Uses standard upholstery needles: 135x17, size 22, 20, 18, etc..
Power: 6600 RPM, 150 watts, 1.5 amp motor.

MANUAL HYDROPONICS PUMP: For submersible use only.
this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter.
SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated.
BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection.
removable screen protects the impeller and motor.
Portable and compact weighing 7 lbs. with built-in carry handle.
SPECIFICATIONS: 1/6 HP, 1500 GPH, 115-Volt, 25-foot cord, manual operation, 2.0 running Amps, 220 Watts, 26-foot shut-off, 11.43 PSI.

MANUAL UTILITY PUMP: For submersible use only.
this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter.
SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated.
BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection.
removable screen protects the impeller and motor.
Portable and compact weighing 7.75 lbs. and equipped with a built-in carry handle.
SPECIFICATIONS: 1/6 HP, 1200 GPH, 115-Volt, 10-foot cord, manual operation, 5.0 running Amps, 380 Watts, 26.3 Ft. Shutoff, 11.4 PSI.

Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..

Specification: size: 8inch, voltage: 110V, frequency: 60Hz, power: 120W, air velocity: 745CFM, speed: 2600RPM, noise: 69dB..
High tech design: the aerodynamically designed centrifugal impeller is driven directly by rotor of that delivers strong air flow, moves air through target location efficiently for optimal ventilation, to minimize noise and extending service life..
Saves space: built-in junction box which greatly saves space. Made of high-quality metal, strong and sturdy..
The control switch for 3 settings: speed adjuster has variable speed, OFF, HIGH, MED, LOW. To avoid the risk of burning out the fan motor, controller does not adjust below 50%. It is NOT suitable for shaded pole motor and brushless motor fan..
Package including: 8inch 745 CFM inline ventilation fan, 1* 350W speed adjuster controller..