Top Short Arm Threaded Insert Tool
1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)
- The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
- Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
- The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
- They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
- It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
Check StockQty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt
- Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
- Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
- Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
- For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
- Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check StockABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs
- ...universal thread repair tool pieces separated and easy to access.
- Includes bottom recesses for organizing the coils in included plastic bags.
- [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
- Load the thread insert into installation tool.
- Use the breaking pin tool to remove tang from insert.
Check StockQty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt
- Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
- Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
- Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
- Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts
- 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
- Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
- Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
- Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
- Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockE-Z Lok EK20610 Helical Threaded Insert Kit, 304 Stainless Steel, #10-24 Thread Size, 0.190\ Installed Length (Pack of 10)
- QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this helical thread repair kit..
- 18-8 STAINLESS STEEL WIRE – Kit includes 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
- FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
- KIT INCLUDES – Convenient kit includes coil threaded inserts for metal, STI tap, and threaded insert installation tool..
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
- Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockE-Z LOK Threaded Insert for Hard Wood Assortment Kit Brass Thread Inserts 6-32 to 3/8-16
- THREADED INSERTS FOR HARD WOOD – E-Z LOK Threaded Insert Assortment Kit for hard wood. Brass threaded inserts for putting strong, machine threads in wood..
- PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts in this thread repair kit provide superior holding power using a proprietary external “knife” thread to slice into the wood..
- EASILY INSTALLS – The brass metal threaded inserts are easily installed with a screwdriver, bolt/jam nut, or optional drive tool..
- FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
- KIT INCLUDES – 10 pieces each: 6-32 (0.375" long), 8-32 (0.375" long), 10-32 (0.500" long), 1/4-20 (0.500" long), 5/16-18 (0.625" long), 3/8-16 (0.625" long)..
Check StockE-Z Lok SK30615 Helical Threaded Insert Kit, 304 Stainless Steel, #10-32 Thread Size, 0.285\ Installed Length (Pack of 10)
- QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this helical thread repair kit..
- STAINLESS STEEL WIRE – Kit includes stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
- FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
- KIT INCLUDES – Convenient kit includes coil threaded inserts for metal, drill, STI tap, threaded insert installation tool, and tang break tools..
Check Stock