Top Short Fuel Injection Assembly

Fuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion

  • Simple fuel supply for LS swap with AN-6 adapter fittings included..
  • Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This filter-regulator is commonly installed near the tank so that only a short return line is required..
  • This is a popular fuel supply solution for fuel injection (EFI / FI) retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s..
Check Stock

AAP Set of 8 OEM 42LB 450CC Delphi Fuel Injectors for 99-07 Chevy GMC Cadillac 4.8L 5.3L 6.0L

  • Structural design of this diesel injection pump is reasonable, giving it excellent performance..
  • The structural design of this diesel injection pump is reasonable, giving it excellent performance..
  • This fuel injector can quickly stop fuel supply so as to prevent resource lost, for example to prevent diesel from dipping..
  • Through professional design, this fuel injection pump is suitable for 170F diesel tractor/micro tiller..
  • Sophisticated workmanship makes this fuel injection pump a perfect substitute for worn or damaged fuel injection pumps..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

LOCTITE 222 Low Strength - THREADLOCKER - All Metal Adhesive - Glue 50 ML

  • DESIGN. Ideal for fasteners under 1/4-Inches (6 mm) that require occasional adjustment..
  • RESULTS. Secure, one-piece assembly that will not loosen under stress..
  • SECURE. Locks and seals while preventing parts from loosening due to vibration..
  • EASY TO USE. Removable with hand tools for disassembly. Noncorrosive..
  • APPLICATION. Carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws and much more..
Check Stock

LOCTITE Threadlocker 222 50mL Bottle Purple

  • Prevents vibration loosening of small screws and fasteners.
  • Low strength noncorrosive formula threadlocker.
  • Removable with hand tools for easy disassembly.
  • Typical applications include carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners.
Check Stock

YZHIDIANF 6 Pcs FJ1147 62410 Fuel Injector 0280158233 Fits For For:-Ram ProMaster, For:-Jeep Grand Cherokee Wrangler, For:-Dodge For:-Chrysler 3.6L V6 2011-2019, 05184085AC 5184085AD

  • OEM/Alternate Part Numbers: 0280158233 05184085AC 4G2269 280158233 5184085AD 62410 812-11135 RL184085AC.
  • 【Preium Quality】 PREVENTS CORROSION AND BUILD UP with stainless steel slide and spring assembly, leading to longer service life of fuel injection system.REPLACEMENT FUEL INJECTOR PROMOTES SMOOTH ENGINE OPERATION and optimal gas efficiency.
  • can reduce harmful emissions caused by worn injectors.
  • 【Regular Cleaning Fuel Injectors】Generally Speaking, If The Car Is In Good Condition And The Fuel Quality Is Good, It Can Be Done Every 40,000-60,000 Kilometers. Even If The Fuel Injection Nozzle Is Slightly Clogged, You Don't Need To Be Too Nervous, Because The Impurities Can Be Sprayed And Dissolved When Accelerating At A High Gear. It Is Recommended That Car Owners Should Often Run At High Speeds When Driving Daily To Reduce The Possibility Of Carbon Deposits.
  • 【Enhanced Performance】YZHIDIANF Fuel injectors Are Manufactured To The OE Specification To Provide Factory-fresh Appearance And Direct-fit, That Promote Smooth Engine Operation And Balanced Fuel Delivery Reducing Overall Fuel C....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

DWVO Fuel Pump Compatible with 83-91 Ford F150 F250 F350 E150 E250 E350 Mustang Ranger LTD Thunderbird Mercury Marquis Lincoln Continental

  • DWVO fuel pump is designed as a replacement for your worn-out fuel system part, will help optimize your vehicle’s performance and fuel efficiency.
  • Using an enhanced fourth-generation turbo pump as motor to provide proper power and fuel pressure, which will accelerate fuel atomizing and shorten....
  • Adopting injection molding technology to upgrade plastic parts of electric fuel pump, greatly improve the efficiency and stability of fuel delivery..
  • Easy assembly: Only takes a few minutes to install the sealing ring and swing arm to complete.
  • the provided online installation manual and user manual....
  • Please double check your vehicle info and refer to detailed vehicle fitment on product description page below..
Check Stock

Universal Fuel Injector Cleaning Tool, Non-Dismantle Fuel Injector Cleaner Tester Petrol Cleaner Kit 600ML 140PSI

  • ...uel system will lead to TWC blockage and poisoning. fuel injector cleaner kit is a professional fuel injector cleaner, which can help you clean the whole fuel system quickly and simply, including TWC, intake manifold, throttle and exhaust pipe, etc..
  • 【EFI-Electronic Fuel Injection System】 There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
  • 【Advantage of Non-Dismantle injector】 Can operate non-dismantle cleaning to Fuel System, it can operate cleaning air induction system, optional pipe clamp, fast and safe, multiple connectors match most European Union, Asian, American cars and light trucks..
  • 【Multifunctional Fuel Injection Cleaner Tool】 The non-dismantle cleaner has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connectors for fast- connection and anti-friction oil tubes for all cleani....
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

OTC 6550PRO Professional Master Fuel Injection Service Kit

  • Perform fuel pressure testing diagnose weak fuel pumps or restricted filters test for fuel flow and perform leak-down tests.
  • 0-100 pounds per square inch fuel pressure Gauge.
  • 47 OTC fuel injection system adapters each with a quick connect Schrader Valve.
  • 1997-2008 fuel injection service application manual.
Check Stock