Top Sight Flow Gauge Indicator

DERNORD Tri Clamp In-Line Sight Glass with Flow Sanitary Straight Sight Glass SUS316 1.5 Inch Tri Clamp Clover Type (Flow Pipe OD 38MM)

In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal position.
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

... [Multifunction] - 3 working modes: refrigerant pressure mode, vacuum percentage mode, leak detection mode. 5 pressure unit conversions: KPa, Bar, PSI, InHg, KgF/cm². 2 temperature unit conversions: ℃ & ℉..
[Explosion-proof Sight Glass] - Through the high-definition glass window, the flow of refrigerant can be clearly observed, so problems can be found in time, so that problems can be detected in time..

HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK.
250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE.
ADJUSTS 7 PSI TO 215 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT.
/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..

Precision & Aiming: 12 Gauge Bore Sight with high precision, fast aiming scope and zeroing red dot, allows you to start your passion instantly.
Sight Range: 12 ga laser bore sight allows to sight between 15yds to 100 yds, the straight red laser beam is easier to identify. and to help you adjust the scope and sight quickly and accurately.
Output Power: Class IIIA laser, less than 5mW. Comes with 2 battery sets to unintruptly sharpen your shooting skills.
Zeroing: Precision accuracy can be acheived without any much difficulty due to compact and lightweight size.

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
10 Micron Particulate Element / Flow Rate: 176 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
10 Micron Particulate Element / Flow Rate: 50 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/8" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
Pressure Gauge, Bracket Included, 1 Year Manufacturers Warranty.

Each 2" gauge features 0-76cm/hg readings, shut off valve and all hardware is high brass finish for longer life,higher corrosion resistance and better....
Air flow control is handled by needle and seat valves instead of knobs. This helps to resist the dial indicator "bounce" associated with many other....
This kit lets you synchronise the values of the 4 carburettors as well as adjust/set them..
With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence.

Filter Type: High Pressure Filter, Microglass III, Element Length: Single.
Port Size: 16 SAE, Indicator Type: Visual - Automatic Reset, Gauge Port Location:.
Nominal Filter Rating (Varies by Beta Ratio): 10 micron (3000 PSID High Collapse).
Max Pressure - Non-Fatigue MAOP: 3000 psi (206.9 bar), Max Pressure - Fatigue MAOP: 2000 psi (138 bar).
Bypass: No Bypass, Operating Temperature: -15F to 225F (-26C to 107C), Nominal Flow Rating (Varies by Selection): 20 GPM (76 LPM).

❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - 12v car water temp gauge.
❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
❃ High quality: The water temperature gauge is made of ABS, sturdy an....

Filter Type: High Pressure Filter, Microglass III, Element Length: Single.
Port Size: 16 SAE, Indicator Type: Electrical/Visual (DIN-43650 Connection), Gauge Port Location:.
Nominal Filter Rating (Varies by Beta Ratio): 10 micron (3000 PSID High Collapse).
Max Pressure - Non-Fatigue MAOP: 3000 psi (206.9 bar), Max Pressure - Fatigue MAOP: 2000 psi (138 bar).
Bypass: No Bypass, Operating Temperature: -40F to 225F (-40C to 107C), Nominal Flow Rating (Varies by Selection): 20 GPM (76 LPM).

HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK..
175 PSI MAX PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED. PLEASE NOTE: 3/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE..
ADJUSTS 7 PSI TO 175 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT..
REPLACEMENT FILTER ELEMENT ASIN B01N7VEJ2V. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR..

High Accuracy and Strong Brightness - 12 gauge green laser bore sight is more penetrating than a red boresighter, reaching an aiming range of approximately 15-100 yards on sunny or foggy days. The 12 gauge bore sight laser allows you to zero in quickly and reduce ammo waste..
High Temperature and Low Temperature Resistance - 12GA bore sight can be used normally between -10 ℃ and 40 ℃..
Suitable Size - Fit a 12GA chamber, specific caliber..
Long-Lasting Battery Life - The package contains 3 sets of upgraded batteries (9 LR44 batteries), and each set of batteries last 2 hours. The bore sight doesn't contain a switch, the laser automatically "turns on" when the battery is installed, and "turns off" only when the battery is removed. Please remove the battery after use..