Top Solid Carbide Inserts

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Lathe Boring Bar SNR0012M11+SER1212H11 Turning Tool Holder Lathe Internal Threading Inserts with Turning Inserts 5pcs 11ER AG60+5pcs 11IR AG60 Carbide

  • 【CNC Threading Inserts】: 16ER AG60 carbide inserts length: about 16 mm.
  • 5pcs/pack with a plastic box for convenient storage. Used for turning and finishing on a wide range of materials..
  • 【Advanced PVD Coating】: Made of solid carbide with high performance PVD coated, which has excellent wear resistance and smooth on face, so it can offer long tool life and faster cutting..
  • 【Accurate Threading】: Professional chip-breaker design, provides perfect cutting performance and high accuracy. Also Smooth rake face design makes the chip removal more fluency..
  • 【Widely Application】:Tungsten carbide threading inserts good for Low carbon steel, medium-carbon steel, high carbon steel, alloy steel , adjusting quality steel, stainless steel, cast steel, cast iron, aluminium alloy and copper alloy machining..
  • 【Satisfaction Guarantee】:TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

Accusize Industrial Tools 2.5'' by 0.75'' Bore, 75 Degree Indexable Face Mills with 4 Pcs Apkt1604 Carbide Inserts, 0028-2601

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 2-1/2 inch, Number of Inserts: 4, Cutter Dia.: 2.5.
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

YUFUTOL 4pcs Tungsten Carbide Cutters Inserts Set Combination Set for Wood Lathe Turning Tools,(Include Square,Round and Diamond Shaped Cutters) Supplied with 4pcs Screws

  • This Combination Carbide Inserts Set match our 5pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits YUFUTOL 5pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers..
  • Made of solid tungsten steel,providing you a better experience and durable use..
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 4 different carbide cutters satisfy all you demand:Square With Square(14x14x2.0mm),Diamond Shaped (10mm X 28mm X 2.5mm with Round Point),2pcs Round (Ø12mm*2.5mm-30°).
  • All the carbide inserts are supplied with screws. And they are perfect match our YUFUTOL Woodturning Tool Set..
Check Stock

8Pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools(Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with sharp point),Supplied with Screws

  • This Combination Carbide Inserts Set match our 6pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits Aogbra 6pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers.
  • 4 different carbide cutters satisfy all you demand:Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round (Ø12mm*2.5mm) and (Ø8.9mm*1.85mm).
  • Made of solid tungsten steel,providing you a better experience and durable use.
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners.
  • All the carbide inserts are supplied with screws.
Check Stock

20 Pieces Carbide Turning Inserts TCMT110204 TCMT21.51 TCMT Insert Tain Coated CNC Lathe Inserts for Lathe Turning Tool Holder

  • Carbide Turning Inserts are made of high quality carbide material, not easy to rust and durable..
  • Carbide Inserts are hard and sharp, cutting faster and more efficient..
  • Suitable for turning and finishing machining steel, stainless steel, cast iron and non-ferrous metals materials..
  • 20 pieces gold carbide inserts in a plastic box, easy to store..
  • Size: TCMT110204 TCMT21.51, 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

2 T/C OLSEN HEGAR NEEDLE HOLDER 4.5\ + 5.5\ WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE(HTI BRAND)

  • T/C OLSEN HEGAR NEEDLE HOLDER 4.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
  • T/C OLSEN HEGAR NEEDLE HOLDER 5.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
Check Stock

Indexable Carbide Insert Knife 14.3x14.3x2.0mm-50° 2-Edge Replacement Cutter for Cutech Tool Rikon Carbatec and Most Planer Jointer Helical Cutterheads, 10 Packs

  • Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads..
  • Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching..
  • Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely..
  • The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces..
  • What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job..
Check Stock