Top Solid Surface Router Bits

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length.
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SainSmart Genmitsu Nano Blue Coat End Mill CNC Router Bits Luxury Kit 8 Boxes 80 Bits

  • ➤Cost-Effective: This luxury kit includes 8 boxes total of 80 CNC router bits. All kinds of bits meet your different CNC projects' needs..
  • ➤Nano Blue Coat: All bits are coated by Nano Blue. This is a new craft at the market. With this new technology, it provides higher hardness and....
  • ➤Improve Efficiency: Made of hard steel and featured with high hardness, strength, and wear resistance. This makes your job easier and improves work....
  • ➤Application: It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood..
  • ➤Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Miulika Tungsten Carbide Router Bits Set of 15pieces 1/4 Inch Shank Joinery Bits Tongue and Groove Set Wood Milling Cutter Woodworking Tool with Storage Case for Home Improvement DIY Pro User Beginner

  • ▲DURABLE CONSTRUCTION▲Steel body with solid alloy blade, great craftsmanship, and hardened steel board make the router bits can stand a long time heavy-duty use. The ingenious anti-kickback design ensures a safe installation..
  • ▲ACCURATE AND NEAT ROUNTER BITS▲The high-grade Tungsten Carbide blade is sharp enough to make the wood cutting clean and accurate. It can finish the job with excellent stability, rotate smoothly, moves steadily..
  • ▲VERSATILE SET▲The tongue and groove router bit set has 15 pieces router bits in 1/4 inch universal shank fits all models of routers. This set also includes an Allen wrench for removing bearings. It’s truly versatile for your extra convenience..
  • ▲PORTABLE ROUNTER BITS▲All bits are securely locked in place in the case with internal molded compartments. The plastic case is sturdy which can store and protect the precise router bit during the process of the wood DIY home improvement projects and way too far work sites. It’s lightweight and easy to carry..
  • ▲WIDE APPLICATIONS▲This Rounter Bit Sets can be used on the electric or manual handheld router. A great choice for multipurpose uses like woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all expe....
Check Stock

Fyrddyn 6Pcs 14° X 1/4,3/8,1/2,5/8,3/4,7/8-Inch Dovetail Router Bit 1/4-Inch Shank Woodworking Engraving Bit Milling Cutter for Wood (6PCS 1/4 Shank)

  • 【Multi-Purpose Use】: - Versatile Dovetail Joint Router Bit Set - Complete your hardwood tool collection with 6Pcs of 1/4” shank dovetail router bits. Cutting Diameters are 1/4, 3/8, 1/2, 5/8, 3/4,7/8..
  • 【Durable Steel Body】: - Durable Material&Construction - Solid hardened steel bodies and C3 micro-grain tungsten carbide 2-flute cutters with heat resistant anti-stick coating to give you extra clean, sharp edges..
  • 【WIDELY APPLICATIONS】: - Wide in Use - Dovetail Router Bit Set contains 6 common dovetail bit sizes and angles needed for most dovetail projects. Can be used with a dovetail jig for half-blind dovetail joints or can be used together with dado bits to produce through-dovetail joints.This set of dovetail router bits Cuts wood, MDF, particle board, plywood compact panel..
  • ▲FIT MOST JIGS - Whether you are using Akeda, Leigh, Incra, Porter Cable, or Keller Jig, this set of dovetail router bits will surely fit your jig and cut nicely..
  • 【Satisfaction Guarantee】: - If you have any problem with the Tongue and Groove Router Bits you purchased from us, please feel free to contact us and our sales support team is standing by to assist you..
Check Stock