Top Solid Wood Router Bits

Router Bit Storage Tray - Foam Material for Safe Router Bit Storage, 1-5/16 inch Thick and Stores 60 1/4 inch and 50 1/2 inch Shank Router Bits

  • We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4″ and 1/2″ shanks!.
  • We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while..
  • The 1-5/16″ thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself..
  • The foam router bit tray fits up to 50 each 1/2″ and 60 each 1/4″ shank bits giving you the ability to store up to 110 router bits in one convenient spot. The holes in the tray wrap neatly and snuggly around the bits to keep them from moving around and keep them out of harms way..
  • Wether you have 100 router bits or just a few, the foam router bit tray is and economical and effective way to keep your bits safely stored away when not in use. ROUTER BITS NOT INCLUDED.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

FivePears 2 Pieces of Tongue and Groove Router Bits Set with 1/4 Shank,3 Teeth T Shape Wood Milling Cutter Woodworking Tool

  • ★【Main Size 】Industrial Class Router Bits,Tooth width: 1/4 inch,Shank Dia: 1/4 inch..
  • ★【Main Feature】3 Teeth T-shape bits set for furniture,inlcude 1pcs*Tongue Router Bit,1pcs*Groove Router Bit..
  • ★【Application】The router bits set perfect for handmaking a drawer, wood floor, wainscot paneling and shaker style panel doors and other....
  • ★【Anti-Kickback Design】Solid hardened steel bodies with anti-kickback design 3 teeth T-shape with anti-kickback design..
  • ★【Important Safety】Slowly push,RPM.
Check Stock

Flytuo 6PCS 90 Degree V Groove and Round Nose Router Bit Set 1/4 Shank, Carbide 3D CNC Signmaking Lettering Engraving Router Bit, Woodworking Carving Cutting Tools

  • Durable Material&Construction: These V Groove Router Bits and Round Nose Bits, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant.
  • Precision&Neat Cuts Every Time: Including 3Pcs 90 Degree V-Groove Router Bits + 3Pcs Round Edge Groove Router Bits, smooth and no burrs, 6 pieces in total makes clean and accurate cuts on wood.
  • Versatile Woodworking Tool Kit: Complete your hardwood tool collection with 3Pcs 90 Degree V-Groove Router Bits and 3Pcs Round Nose Groove Router Bits.
  • Package Included: 3Pcs 90 Degree V-Groove Router Bits - 1/4" Shank, Cutting Diameter: 1/4", 3/8", 1/2".
  • 3Pcs Round Nose Groove Router Bits - 1/4" Shank.
  • Widely Applications: These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
Check Stock

Fyrddyn 6Pcs 14° X 1/4,3/8,1/2,5/8,3/4,7/8-Inch Dovetail Router Bit 1/4-Inch Shank Woodworking Engraving Bit Milling Cutter for Wood (6PCS 1/4 Shank)

  • 【Multi-Purpose Use】: - Versatile Dovetail Joint Router Bit Set - Complete your hardwood tool collection with 6Pcs of 1/4” shank dovetail router bits. Cutting Diameters are 1/4, 3/8, 1/2, 5/8, 3/4,7/8..
  • 【Durable Steel Body】: - Durable Material&Construction - Solid hardened steel bodies and C3 micro-grain tungsten carbide 2-flute cutters with heat resistant anti-stick coating to give you extra clean, sharp edges..
  • 【WIDELY APPLICATIONS】: - Wide in Use - Dovetail Router Bit Set contains 6 common dovetail bit sizes and angles needed for most dovetail projects. Can be used with a dovetail jig for half-blind dovetail joints or can be used together with dado bits to produce through-dovetail joints.This set of dovetail router bits Cuts wood, MDF, particle board, plywood compact panel..
  • ▲FIT MOST JIGS - Whether you are using Akeda, Leigh, Incra, Porter Cable, or Keller Jig, this set of dovetail router bits will surely fit your jig and cut nicely..
  • 【Satisfaction Guarantee】: - If you have any problem with the Tongue and Groove Router Bits you purchased from us, please feel free to contact us and our sales support team is standing by to assist you..
Check Stock

Genmitsu CNC Wood Carving Router Bits Set, 1/4'' Shank, 4 PCS, 15° Detail Carving Liner+ 20° Profile bit+ 60° & 90° V Groove, WC04A

  • High Quality: Made of Premium Tungsten Carbide Steel Alloy. That's great for milling and cutting performance, ensuring that our bits stay sharp and provide nice clean cuts. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
  • Efficient Cuts: This wood carving set comes with 4 PCS, 1/4” shank router bits. 1PCS 20° profile bit for etching and outlining.
  • 1PCS 15° carving liner for fine lines and details.
  • 60° & 90° V groove bits for multiple background depths..
  • Shank diameter: 1/4''(6.35mm), cutting diameter: 0.2mm, overall length: 50mm..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, plywood, organic board, etc. Highly recommended for wood carving. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu WC04A Wood Carving Router Bits Set are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN：B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Platinumedge Router Bits Set, Tungsten Carbide Router Bits Set 1/4 Shank, Router Bit Kit for DIY, Woodworking Project, 35 Piece Set with Premium Aluminum Carry Storage Case

  • 【Sharp Carbide Tipped Router Bits】 Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood. With two cutting edges, our router bits set surpass single-edge bits in making smooth cuts..
  • 【Compatible Universal 1/4" Shank】Universal 1/4" shank is compatible with all major router instrument (either handheld or benchtop router table)..
  • 【Widely Applications】 These tongue and groove router bit set is truly versatile for your extra convenience. Perfect for edging, trimming, veining and grooving in all woodworking projects..
  • 【Durable Construction】Hardened solid alloy steel construction with a powder coating finish for durability and longevity. It is very well constructed, sturdy, and very reliable..
  • 【Well Storage and Carry Case】Comes with aluminum storage case for easy storage and organization. Sturdy and protect the bits while traveling to work. Box is marked with scale and can be placed back in the correct position after use..
Check Stock

BAYTORY Professional Pattern Flush Trim Router Bit Set with 1/4 inch Shank, 4Pcs 1/2\ Cutting Diameter Carbide Bits with Top Bearing Prevent Tear-Out, Template Guide Woodworking Milling Cutter Tool

  • Precision Cuts: 4Pcs 1/4 Shank Pattern Flush Trim Router Bits Set, Carbide Template Top Bearing Flush Trim Bits Set, Prevent Tear-Out, Perfectly Suitable for Light Work, 1/2 inch Cutting Diameter, Flush trimming machine drill bit insert cutting length:11mm, 20mm, 25mm, 38mm..
  • High Quality: 1/4 Inch Shank Pattern Flush Trim Router Bit, high-quality alloy steel bodies with C3 micro-grain tungsten carbide blades cutting with precision and ease..
  • For Cutting Various Wood Materials: This flush trim router bit can cut and trim solid wood, density boards, MDF, chipboard, splint, and more. Avoid cutting metal and non-wood material.
  • Versatile Woodworking Tool: This flush trim router bit set is preferred choice of professionals and hobbyists alike. Useful for trimming, grooving, etc. Such as DIY project, lettering, and other template work..
  • Wide in Use: Flush trim router bit 1/4 shank, designed for desktop engraving machines (such as CNC hand-held and table-mounted router). It's cannot be used in electric drill & drill machines..
Check Stock

Genmitsu CNC Router Bits 1/8 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 10 PCS, SR10A

  • High Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more..
  • Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Shank diameter: 1/8''(3.175mm), cutting diameter: 1/8'' (2.175mm), cutting length: 17mm, overall length: 38mm, comes with 10pcs 1/8 shank 2-Flute Straight Router Bits..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu SR10A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock