Top Spindle Nut

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

NEIKO 02531A 10 Piece 12 Point Socket Set 1/2” Drive, Lug Nut Remover, Spindle Nut Socket, Axle Nut Socket Set, Metric 29-39mm Socket 1/2 Drive Impact Set, Cr-Mo Impact Adapter, 3/4" -1/2” Reducer

  • HIGH TORQUE: This heavy-duty axle nut socket set is forged premium chrome molybdenum steel to handle extreme levels of impact and torque changes. Works with CV axle nut, front axle, or rear axle nut socket set..
  • LARGE METRIC SOCKET SET: Black phosphate coating increases protection from the elements ensuring a long-lasting spindle nut socket set. This 12-point socket set 1/2 drive is prefect for both front-wheel drive, and four-wheel drive vehicles!.
  • BIG SOCKET SET: This wheel bearing lock nut socket set is designed for most axle hub & spindle nuts including wheel bearings, CV axles, and knuckle assembly. Hand tools work with 6-point nuts also..
  • LASER ETCHED: Included impact adapter for use with 3/4” drive. High contrast laser etched markings for easy identification of pieces and sizes that will not wear away or rub off from everyday use..
  • AXLE NUT SET INCLUDES: 1/2" Dr.: 29mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 39mm as well as a durable blow-molded carrying case for easy transporting..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

TBAPFS 4Pcs 1/2\ Drive Deep Impact Socket Set 12 Point Metric 30mm 32mm 34mm 36mm Drive Spindle Axle Hub Nut Socket Set,Heavy Duty with Portable Storage Case,Use In Removing And Installing Axle Nuts

  • 【Size】Axle Hub Nut Hex Socket Set Including 30mm, 32mm, 34mm, 36mm. Provides the most common size sockets used in removing and installing axle nuts, spindle nut applications. Extra deep to fit various axle lengths. Each socket has a drilled head to locate retaining ball bearing on most breaker bars and impact wrenches to ensure a safe secure fit..
  • 【Work Exquisite】Heavy-duty impact quality for use with a 1/2inch drive impact tool. Manufactured from chrome steel with heat-treated for extra strength and durability, oxide finish to resist rust. The specially hardened sockets with corrosion protection are designed for the removal of damaged bolts, screws and nuts..
  • 【Professional】The 12-point spindle design keeps a tight grip and reduces damage to the wheel nut. Install, Removal, Repair to remove, install, and repair hub or axle nuts on your vehicle. Fits axle nuts on most vehicles. The innovative spiral profile digs itself into the head of a damaged screw or nut, allowing it to be easily loosened..
  • 【Axle Nut Removal】Our axle nut socket toolset is ideal for removing front-wheel-drive axle nuts. A complete toolset that will help the user with many axle nut removal jobs. All parts are well packed and assorted in a plastic box for convenient stor....
Check Stock

Anytime Tools Tubular Inside Micrometer 2-12\ Internal Precision Set

  • Each set consists of an inside micrometer head and a series of extension rods.
  • Anvil and spindle are hardened and precision ground with microlap finish on ends..
  • Positive locking nut on spindle. be calibrated by a micrometer or ring gage..
Check Stock

Sunex 2834 1/2-Inch Drive 34-mm Deep Spindle Nut Impact Socket

  • Deep design for GM and Chrysler spindle nut applications.
Check Stock

Husqvarna 48' 4 Bolt Mower Deck Spindle Assembly Replaces 532187281

  • Replaces Husqvarna Part Numbers: 587253301, 587125401, 532192870, 532187292, 532187281.
  • Includes: Spindle Housing, Spindle Shaft, Bearings, Blade Bolt, Blade Washer, Pulley Nut.
Check Stock

RATTMMOTOR CNC Spindle Motor Kit 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W....
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection,....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

Spindle Assembly for Craftsman/Hus/Ariens/Poulan, Mandrel Assembly for 42" 46" 48" 54" Mower Deck, Come with All Mounting Hardware Including Threaded Bolt and Grease Fitting, Replace 187292 192870

  • 【Compatibility】Qualitied spindle assembly directly fit for many mower tractor，including craftsman, hus, ariens, poulan，ect. Poulan pro, roper, sears. Fits 42", 46", 48", 54" decks. [NOTE: It will not fit any Z Turn Mowers.].
  • 【Specific Model】Great replacement Spindle for Hus 187281, 532192870, 587819701, 532187292, 532187281, 539112057, for Arians 21546299, 21546238, for AYP 192870,187292,532192870..
  • 【Easy to Install】Come with 4 threaded mounting bolts, pulley nut, blade bolt and washer which will make the replacement to be easier and more convenient..
  • 【High Performance】Made of sturdy material, well inspected and tested by manufacturer. The spindle is greaseable, it has grease fittings at the top for maintenance..
  • 【Great Design】The mower deck spindle is pre-greased, equipped with a grease fitting on the side of the spindle for maintenance, recommended to grease prior to use..
Check Stock

ULTECHNOVO Spindle Fixed Seat Engraving Machine Spindle Fixture Motor Holder Aluminum Mount Bracket

  • Made of aluminum alloy material, surface oxidation, very durable.
  • Anti-skid, shock resistant and not easy to deform,engraver pen.
  • Exquisite workmanship, attractive appearance and smooth,engraving pen.
  • Unique card slot, the screw nut firmly stuck, simple to lock the spindle.
  • Specifically suitable for an inner diameter of 38-46mm spindle motor.
Check Stock

Spindle Assembly Fits for Craftsman/Husqvarna/Ariens, Mandrel assembly Husqvarna 42' 46' 48' 54 Mower Deck Spindle Craftsman, Replace for 587819701 187292 192870 532187281 532187292 567253301

  • Replacement spindle for Husqvarna 187281 532192870 532187292 532187281 539112057, for Arians 21546299,21546238,for AYP 192870,187292,532192870.
  • Compatible with many mower tractor including Craftsman/Husqvarna, Poulan, Poulan Pro, Roper, Sears. Fits 42", 46", 48", 54" decks..
  • The spindle is GREASEABLE, it has grease fittings at the top for maintenance..
  • Come with 4 THREADED mounting bolts (the mounting holes are also already threaded), pulley nut, blade bolt & washer, which makes replacement much easier..
  • Length 7-1/2", Blade mound: 5 point star shaped, this Mower Deck Spindle is made of high quality aluminum alloy, durable and corrosion resistant..
Check Stock

Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)

  • Micrometer Set: With flat anvil/spindle for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
  • 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
  • Ratchet stop thimble applies constant measuring force for repeatability between users.
  • Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
  • Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
  • 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.
Check Stock