Top Spiral Pipes

DrainX 50-FT Steel Power Pro Drum Auger Plumbing Snake with Drill Attachment | Use Manually or Powered | Heavy Duty Cable with Work Gloves and Storage Bag Included

  • The drill adapter allows the snake to be driven by electric drill that attaches to the spindle, or driven by hand using the knob to clear your household drain clogs easily without calling a plumber..
  • 1/4″ diameter snake with spiral head designed for 1-1/4″ through 3″ pipes. It is not recommended to use this drum auger to clear a toilet clog as the snake may damage the porcelain. In addition, the 1/4 diameter cable may get twisted inside the large diameter of the toilet drain. The diameter of the tip 9/16 of an inch or 0.56 inch..
  • Features a lasting and durable steel drum housing with grip handle for easy use, for decades of money saving service.
  • Grip handle and turning knob allows you to use this tool easily to manually drive the drain cable to unclog your pipes. Thumbscrew keeps the cable secure in its housing while the drum is not in use..
  • Work Gloves and Drawstring Carrying Pouch Included. Great for use in plumbing all drains including kitchen and bathroom sinks, bathtubs, showers, and drainage pipes. Instruction manual is visible on this page..
Check Stock

DrainX 50-FT Steel Power Pro Drum Auger Plumbing Snake with Drill Attachment | Use Manually or Powered | Heavy Duty Cable with Work Gloves and Storage Bag Included

  • The drill adapter allows the snake to be driven by electric drill that attaches to the spindle, or driven by hand using the knob to clear your household drain clogs easily without calling a plumber..
  • 1/4" diameter snake with spiral head designed for 1-1/4" through 3" pipes. It is not recommended to use this drum auger to clear a toilet clog as the snake may damage the porcelain. In addition, the 1/4 diameter cable may get twisted inside the large diameter of the toilet drain. The diameter of the tip 9/16 of an inch or 0.56 inch..
  • Features a lasting and durable steel drum housing with grip handle for easy use, for decades of money saving service.
  • Grip handle and turning knob allows you to use this tool easily to manually drive the drain cable to unclog your pipes. Thumbscrew keeps the cable secure in its housing while the drum is not in use..
  • Work Gloves and Drawstring Carrying Pouch Included. Great for use in plumbing all drains including kitchen and bathroom sinks, bathtubs, showers, and drainage pipes. Instruction manual is visible on this page..
Check Stock

DrainX 25 FT Heavy Duty Ergonomic Load Support Drain Auger with Drill Adapter - Extra Grip Support Handle - Unclogs Household Drains Pipes Gutters

  • DrainX 25 FT Heavy Duty Ergonomic Load Support Drain Auger with Drill Attachment is a great household tool for quickly unclogging any drain including....
  • 1/4" Dia. Drain Cleaning Cable with spiral head designed for 1-1/4" through 3" pipes. It is not recommended to use this drum auger to clear a toilet....
  • Patented thumb support improves grip and provides extra comfort. Features a lasting and durable drum housing with grip handle for easy use, for....
  • Grip handle and turning knob allows you to use this tool easily to manually drive the drain cable to unclog your pipes. Thumbscrew keeps the drain....
  • DrainX manufactures a variety of quality drain cleaning solutions for both the do it yourself-er and the professional. We know that sometimes things....
Check Stock

HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat

  • ...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • ...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

XAREX RPH 120V 12ft, Pipe Heat Cable with Glass Tape, Self-Regulating Pre-assembled Heat Tape with 6ft Cord & Lighted Plug for Freeze Protection of Plastic and Metal Water Pipes Electrical Heat Trace

  • QUALITY HEAT CABLE - Keeping your pipes/water lines from freezing during the winter,functioning perfectly for all kinds of plastic and metal pipes (including copper, galvanized, ABS plastic, PVC plastic pipes, etc), not suitable for gutters, hoses.
  • SELF-REGULATING TECHNOLOGY - the cable output will change automatically depend on the ambient temperature, the output goes up when the temp is low and goes down when it's high, saving energy and electricity for you, illuminated plug lets you see if the heat cable is working from a distance.
  • BUILD-IN THERMOSTAT - you just tape the thermostat in place against the pipe, the cable is able to monitor the temp of your pipes, it will work when the temperature of the pipe below 37°F and turn off when above 50°F, 1.75 away from the plug.
  • EASY TO INSTALL - pre-assembled for quick installation, the heat cable can be straight-traced or spiral on the pipe, be aware that the lowest installation temperature is 14°F and the maximum exposure temperature is 221°F.
  • HEAVY DUTY AND SAFECABLE - ETL cerfied, 2FT cold lead and 3FT/18FT heat cable is commercial grade for long-time and heavy-duty usages, PVC out jacket, 3W/ft under 50°F, 1 Year warranty provided, please test the cable before the installation.
Check Stock

HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check Stock

HEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check Stock

HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black

  • ...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • ...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

Walton 10254 1/4\

  • [PRO-QUALITY]: Premium chrome molybdenum steel industrial grade extractors are ideal for removing broken screws, bolts, nuts, studs, fittings, threaded pipes and pins and is perfect for any mechanic’s tool kit..
  • [PRECISION]: Precisely machined aggressive multiplane teeth with left hand spiral design provides extra gripping power and faster threading..
  • [CONVENIENT]: High-visibility size markings on each extractor for quick selection of the right drill bit for extraction applications..
  • [DESIGN]: Specially designed hexagon head for applying maximum torque with sockets and wrenches.
  • [INCLUDES]: 25 pieces of extractors from 1/8 inch (3.5 mm) to 7/8 inch (23 mm) in 1/32” increments and a heavy duty carrying case for storage and organization..
Check Stock

DEWENWILS Roof Heat Cable, 6ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed

  • ...e for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock