Top Split Ender Pro

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • Compatible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
  • All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite m....
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

HICTOP Upgraded New Version Ender 3 pro Glass Bed One Side Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on one side and the coat material is better than the both sides one, it is much more stable and not easy to remove. We can send you new one for free if it peels off in 3 monthes.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers..
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a super plate surface..
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock

Creality PLA Filament Pro Grey, 1.75mm 3D Printer Filament, Ender PLA + (Plus) Printing Filament, 1kg(2.2lbs)/Spool, Dimensional Accuracy ±0.03mm. Fit Most FDM Printer

  • BUBBLE FREE: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag..
  • STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother..
  • SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience..
  • BEGINNER & EXPERT FRIENDLY: Creality 3D Printing Filaments making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • WIDE COMPATIBILITY: Works ferfectly with most 3D printers on the market, Such as Ender 3, Ender 3 S1,Ender 3 pro,Ender 3v2, Ender 5 S1, Ender 5 pro, CR 6, A 8, CR 10..
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock

Creality Ender 3 Original Extruder Assembled MK8 Hot End Kit for Ender 3 3D Pinter with Aluminum Heating Block and 0.4mm Nozzle

  • Creality 100% original and brand new Hot End Kit for Creality Ender 3, Ender 3X, Ender 3 Pro..
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles..
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V..
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)..
  • Suitable For Creality Ender 3, Ender 3X, Ender 3 Pro..
Check Stock

Box3D 3D printer Mini SD female cover, sd Adapter, Compatible Ender 3 Ender 3 pro Ender 3 v2 Neo Voxelab Aquila Kobra Ender 5 pro Ender 5 plus Neptune 2 Ender 3 Max CR-10S PRO Odin-5 F3

  • 【Function】: It is difficult to insert the micro SD card, which increases the service life of the micro SD card..
  • 【Application】:3D printer Mini SD female cover, sd Adapter, Compatible Ender 3 Ender 3 pro Ender 3 v2 Neo Voxelab Aquila Kobra Ender 5 pro Ender 5 plus Neptune 2 Ender 3 Max CR-10S PRO Odin-5 F3.
  • 【Material】:This apapter is made of high quality gold plating.PCB thickness plugging and unplugging smoothly.
  • 【Packing List】:Package includes 2 micro SD card adapters,NOT included SD card..
Check Stock

ANYCUBIC Vyper 3D Printer Auto Bed Leveling 3th Gen Upgrade FDM Metal FDM 3D Printers with TMC2209 32-bit Silent Driver Fast 3D Printing Large Build Size 9.6 x 9.6 x 10.2 Easy Assembly

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free....
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable....
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit....
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock

25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5 Pro, Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer

  • High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging..
  • Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers..
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ...d level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram..
  • Wide Compatibility – The Creality ender 3 upgrades kit can used on other creality 3d printers, like CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7..
Check Stock