Top Spool For Bonding Wire

Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During 3D Printing, Filament Holder, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Storage Box

  • 1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

Parallel Clapton Nichrome 80 28gx4+38g 6ft Electronic Resistance Wire

  • For use as a resistor in DIY electronics or for craft wire projects.
  • 8 Gauges included. 8 spools, 550 feet of wire total.
  • 1 - 50 ft spool of each 22, 24, 26, 28, 30 Gauge wire and.
  • 1 - 100 ft spool of each 32, 34, 36 gauge Kanthal A1 Wire.
Check Stock

SUNLU Clear PLA Filament 1.75mm, 3D Printer Filament Transparent PLA Dimensional Accuracy /- 0.02 mm, 1KG

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】---These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-230℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

Mixed 550 Feet of Kanthal A1 Wire 22,24,26,28,30,32,34,36 Gauge Pack

  • For use as a resistor in DIY electronics or for craft wire projects.
  • 8 Gauges included. 8 spools, 550 feet of wire total.
  • 1 – 50 ft spool of each 22, 24, 26, 28, 30 Gauge wire and.
  • 1 – 100 ft spool of each 32, 34, 36 gauge Kanthal A1 Wire.
Check Stock

Amazon Basics TPU 3D Printer Filament, 1.75mm, White, 1 kg Spool (2.2 lbs)

  • 3D printer filament with 1.75mm diameter + / - .05mm.
  • designed to fit most common 3D printers (check spool size for compatibility).
  • ideal for printing small parts, phone cases, watch bands, and more.
  • Made of strong yet flexible thermoplastic polyurethane (TPU), which is easy to use and offers excellent layer-to-layer bonding.
  • holds up well to more rigorous wear and tear.
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining.
  • resealable storage bag included to protect filament between use.
  • Measures 9.8 by 9.3 by 16.1 inches (LxWxH).
  • backed by an Amazon Basics 1-year limited warranty.
  • Vacuum-sealed packaging in desiccant bag to keep product fresh, dry, and dust-free for optimal 3D printing results.
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA White

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 210-220℃, bed 60℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA Gray

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-230℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

Mixed 550 Feet of Stainless Steel 316L Wire 22,24,26,28,30,32,34,36 Gauge Pack

  • For use as a resistor in DIY electronics or for craft wire projects.
  • 8 Gauges included. 8 spools, 550 feet of wire total.
  • 1 - 50 ft spool of each 22, 24, 26, 28, 30 Gauge wire and.
  • 1 - 100 ft spool of each 32, 34, 36 gauge Stainless Steel 316L Wire.
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA White+Grey

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

Marble PLA Filament 1.75mm 3D Printing Filament 1KG 2.2LBS 3D Printer Material Sparkly Stone Rock PLA CC3D

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

PLA 3D Printer Filament, SUNLU PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75mm, PLA Black+White

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

eSUN 3mm Fire Engine Red PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Fire Engine Red, (Pantone 199C)

  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid wasting of shipping...
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C.
  • Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA..
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock