Top Square Carbide Insert

Pack of 5 Wood Turning carbide Cutter inserts Combination Set,For YUFUTOL Or Other Popular Wood Turning Tools(Include Square, Square With Radius,Diamond,Round Shape Cutters) Supplied with Screw

• This Combination Carbide Inserts Set Will Give The Best Selection For Your Wood Turning Job,It Fits YUFUTOL Brand Wood Turning Tools Or Other Similiar Brand Tools..
• Size And Shape Included: Square(14mm 15mm),Square With Radius (15mm-2″ Radius),Round(16mm), Diamond Shape With Radius Point..
• 90* Square and 2″ Radius Fix Full Size Rougher, Round Cutter Fix Full Size Finisher or Hollower, Diamond Cutter Fix Detailer.
• All The Carbide Insert Cutters Supplied With Screws, All You Need Is Find The Matched Wood Turning Tools Before Start Your Turning Job.
• Advantages：Significantly Improved Efficiency And Turning Results, Save Time and Cost.

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

• APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
• Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
• Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
• Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
• These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

Shars 3/8\ x 6\ SCLCL Left Hand Indexable Boring Bar with CCMT Insert 404-2478 P]

Carbide Tipped Woodturning Tools DW-9 Carbide Wood Lathe Tools 6pcs Hollower Rougher Detailer Finisher Sander Made of Stainless Steel and 3pcs aluminium alloy Handle and Carbide Cutters and Sandpapers

• CNC machined 12mm solid stainless steel，Not easy to rust.
• Indexable Replacement carbide insert design，Indexable give you fresh edge for maximum cutter life, And You can find matching carbide tipped insert(DW-9) in my Amazon store.
• Replaceable Handle：Match 3pcs aluminum alloy handle.
• Tool is designed with a square shaft making it easy to keep tools flat on the tool rest.
• Total Length：22 Inches，Tool Length：10 Inches，Handle Length：14 Inches.

PVC Pipe Reamer PVC Fitting Saver PVC Socket Saver with 0.315 Hex Shaft 1-½-Inch and 2 Inch Head Aluminum for Water Lines Drain Lines Vent Lines

• Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC....
• Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
• High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
• Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
• Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
• It is recommended to use a variable-speed electric drill....

Accusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416

• 90Degree Cutting angle Nickel Plated. Screw down insert.
• All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
• Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
• with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
• Uses APKT / APHW / APKR_APht / APMT insert (sold separately).

F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size

• 90Degree Cutting angle Nickel Plated. Screw down insert.
• All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
• Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
• with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
• Uses APKT / APHW / APKR_APht / APMT insert (sold separately).

Carbide Wood Lathe Tools, Woodturning Tools Wood Lathe Turning Tool Set, with Round/Square/Diamond Insert and Interchangeable Aluminum Alloy Grip Handle

• Combo Set Include: 4 Pieces Wood Turning Tools(Finisher/Rougher/Detailer/Swan Neck Hollower),2 Sets of Carbide Insert Cutters And 2* Key Wrenches.
• 2 Sets of indexable Replacement carbide inserts:matched with Carbide Cutter (2pcs Square14×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°，2pcs Round 16 × 3mm-30°,2pcs Diamond 10×28mm with Radius Point).
• Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
• Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer/Hollower will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.

Cocowin PVC Pipe Reamer, PVC Fitting Saver, PVC Socket Saver with 1-½-Inch and 2 Inch Head Aluminum for Water Lines, Drain Lines, Vent Lines

• Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
• It is recommended to use a variable-speed electric drill with low-speed cutting.
• Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
• Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
• High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
• Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
• Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

• Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
• Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
• Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

• 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
• 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
• AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
• 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
• Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

• PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
• Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
• Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
• Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
• If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..