Top Stainless Fittings

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...(OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
  • 5/16-inch barb connects your hose and screws/unscrews from fitting.
  • Included hose clamps tighten seal on hose and are winged for easier use.
  • PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience.
Check Stock

PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs

  • PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
  • Easy to install:connecting by the outer thread of the quick fitting.
  • Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

8FT Shark Industrial Premium PEX Tubing Ice Maker Water Connector with 1/4\ Comp by 1/4\ (8FT, White)

  • HQRP® Universal Premium Stainless Steel Refrigerator / Ice Maker Hose.
  • 1/4" FCM x 1/4" FCM stainless steel fittings.
  • Universal Fit - The 1/4" Female Compression Connections On Either End Are A Perfect Fit For Your Refrigerators / Ice Makers And Water Supply Lines.
  • CERTIFIED FOR YOUR SAFETY – These Hoses Are UPC (Universal Plumbing Code), NSF 61 (National Sanitation Foundation) Certified.
  • BURST PROOF - Designed To Last, Our Hoses Use True 304 Stainless Steel For Braided Outer Protective Cover Which Last Incredibly Long Time For Effective Protection Against Rust And Burst. Some Other Hoses May Not Use Real 304 Stainless Steel For The Braided Cover And Could Result In Rust Even Burst..
  • UNIVERSAL FIT - Our Hoses Connect To All Refrigerators / Ice Makers With Industry Standard 1/4" FCM (Female Compression) Connector Fittings. Easy Installation. Compatible with Samsung, Whirlpool, GE, Frigidaire, Eastman, Kenmore and all major brands..
Check Stock

MTM Hydro 28 Special Foam Cannon and Spray Gun with Large Reservoir and Adjustable Nozzle - High-Pressure Foam Washer for Cars Boats Roofs & More

  • This Kit includes: MTM Hydro Fittings and Components, only. Now includes 14mm & 15mm M22 Plug adaptors converted to 3/8” QC Couplers so it is....
  • ¼” Stainless Plug for PF22 Cannon Inlet.
  • Teflon tape for Installation of fittings.
Check Stock

Lower Latch Hook, for 4UV26, etc.

  • ¡¾Protection¡¿Fixed with screw fittings and can be used to support doors and window for easy ventilation..
  • ¡¾Good Materials ¡¿Selected high-hardness stainless steel material, which is durable, wear-resistant and not easily deformed..
  • ¡¾Durability¡¿Adopts thickened base, stable and firm, not easy to break, and has a long service life..
  • ¡¾Practical¡¿The edges are rounded, the surface is smooth, and the hand will not be scratched, more safety..
  • ¡¾Widely used¡¿Practical hardware accessories, suitable for homes, offices, supermarkets, factories and other places..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

4LIFETIMELINES Fitting Assortment 1/4 Tube Nut Union Adapter 8 SKU

  • Contains 8 SKU, fast moving 1/4" fittings to keep on hand when working with automotive hydraulic braking systems.
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast-moving brake line fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling brake fittings quick and easy..
  • Compatible with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel brake lines.
  • Lifetime warranty included on all products purchased from 4Lifetimelines.
Check Stock

DIYCO D3 Digital Tire Inflator Red

  • 21" Stainless Steel Hose with Fittings and Locking Chuck.
Check Stock

Bysn 1/8 T316 Stainless Steel Cable Aircraft Cable for Deck Railing 7 x 7 Strands Construction Braided Steel Cable 500FT Wire Rope Cable for Railing

  • This flexible Stainless Steel cable making it easy to work with, and has a low co-efficient of stretch. Its ease of use makes it excellent for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings..
  • Cable is stainless steel for maximum durability, strength and weather protection..
  • 7x7 construction (7 groups of 7 strands braided together to form the cable), which is flexible. Good type of cable for handling bends and corners on cable railings..
  • Cable Material: T316-Stainless Steel,Cable OD: 1/8 inch, Cable Breaking Strength: 1780 lb.
  • This Wire Rope Cable Can Be Used For Indoor and Outdoor.
Check Stock

Twinkle Star Pressure Washer Adapter Set, 1/4 Inches Quick Disconnect Kit, Quick Coupler Fittings, 5000 PSI, TWIS223Y

  • 1/4 quick connect coupler set equipped with 1 pc quick coupler socket and 1 pc quick coupler plug. Max. Working Pressure: 5,000 PSI.
  • Brass quick coupler socket: 1/4’’ female NPT thread and quick disconnect socket.
  • Stainless steel quick coupler plug: 1/4’’ plug and male NPT thread..
  • Pressure washer adapter set are made of premium quality brass and stainless steel, durable, provides secure and quick fittings. Ball lock design ensures a solid connection..
  • Provides secure and quick fittings, simple to assemble and disassemble. Quick connect pressure washer gun, wand, hose or nozzle..
Check Stock