Top Steel Screw Bushings

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

uxcell M15 0.035T Capacity Single Swivel Rope Pulley Roller Block 2 Pcs

  • Available with bronze self-lubricating bushings.
Check Stock

maXpeedingrods 13LBS Dent Puller Slide Hammer Heavy Duty Auto Body Truck Repair Tool Kit,18 Pieces Slide Hammer Puller Set

  • ...at steel,circular pipe, hex taping adaptor, hex taping screw holder, tapping screw,connector hasp iron,double barreled connector,carry case.
  • 【Versatile Puller Set】 Versatile puller assortment lets you handle all kinds of pounding and pulling operations. Can easily pull bushings/seals/sleeves/bearings/dents/pressed-in bolts.
  • 【Best Options For You】If taking it to a body shop to fix a new dent seems too time-consuming or expensive, maXpeedingrods dent repair kit offers a way of doing it yourself. Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist.
Check Stock

ACZCR 13LBS Dent Puller w/Slide Hammer Auto Body Truck Repair Automotive Hammer Puller Repair Frame Set with Carrying Case (18 PCS)

  • ...er set can be used on most cars and trucks. Disassemble dents from auto body repair work without extracting the vehicle's interior panels and trim.
  • 【A MUST-HAVE TOOL】- The assortment of versatile pullers lets you handle a variety of tapping and pulling operations. Bushings/seals/sleeves/bearings/dents/press-in bolts can be pulled easily. Solid steel shaft with knurled handle for guaranteed grip. The long shaft allows for a stronger pull. Perfect for professional mechanics and personal repairs..
  • 【PACKAGE INCLUDED】 - Complete 18-piece set for a variety of pulling applications including: sliding hammer, rubber cover, 6-piece snap iron, long tube snap iron, cast iron hammer, hex nut, right angle flat bar, round pipe, hex tape adapter , hexagonal tape screw holder, self-tapping screw, connector buckle iron, double tube connector, carrying case.
  • 【PREMIUM QUALITY】 - Forged from high-strength carbon steel for durability. After black anodizing process, it is strong and rust-proof..
  • 【NOTE】 - If you have any questions or problems, please contact us or ask them in Q&A,....
Check Stock

osemar Quick Hitch Adapter Bushings Fit for Category 1, 2 Pair! Quick Hitch Bushing Set and Pin

  • Feature: Quick Hitch Bushings is a Fast and Simple Conversion to Make Implements With Category 1 3-point pPins Compatible with a Quick Hitch..
  • Fitment: Cat 1 Bushings fit for John Deere, Speeco, Jeffers and many more quick hitches..
  • Material: Hitch Bushing Kit is coated with steel. Coated-steel surface treatment effectively prevents rust..
  • Installation: Easy to install and save time. You can only require a hammer to insert the roll pins..
  • Package include: 4 X houlder bushings, 4 X roll pins.
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Plus 6 inch Widen Wood Dowel Jig Extended Step Drill Guide Bushings Set Woodworking Joints Tools

  • AUTOTOOLHOME self centering doweling jig Extended can be used to make accurate butt joints,miter joints and edge joints as well as acting as a mortising guide..
  • Self Centering Dowel Jig PLUS can be used for more wider material, on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture..
  • Made from aircraft grade aluminum,more stable, corrosion resistance.Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

uxcell Sleeve Bearings 5mmx8mmx10mm Chrome Steel Oilless Bushing 6pcs

  • Size - Bore Diameter: 5mm, Outer Diameter: 8mm, Length: 10mm.
  • Material - Chrome steel, smooth surface, high hardness, high load capacity, wear-resistant.
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Steel bushings are suitable for high load and high-speed applications. Sleeve bearings are used in a wide variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Prime-Line K 5131 White Storm Door Hinge Pin Kit (3-Pack)

  • Used as replacement door hinge pin kits for Croft storm doors and a variety of other storm door manufacturers.
  • Steel spring and nylon pins and bushings.
  • Kit contains 3 springs, 6 pins and 6 bushings.
  • Easy to install in less than 30 minutes with a few simple tools.
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

VMS RACING FRONT and Articulated Stainless Steel REAR LOWERING KIT Bolts and Bushings Compatible with Chevy Chevrolet Corvette C5 97-04 1997-2004 Complete Set

  • [ IMPORTANT ] VMS RACING Brand (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • VMS Racing 14-piece Kit includes PREMIUM QUALITY, Grade-8 Bolts, Heavy-Duty Polyurethane Bushings, heavy-duty washers and Nylock nuts for the REAR. The FRONT is made of 100% CNC-machined STAINLESS STEEL with DELRIN BUSHINGS, WRENCH FLATS and ARTICULATING BALL STUD FOOT PADS for perfect alignment and smooth suspension travel..
  • Designed to lower your Corvette C5 up to 1.0 inch in the REAR and up to 1.5 inches in the FRONT. This is a DIRECT FIT. NO MODIFICATION to the STOCK COMPONENTS is required..
  • This kit has all you need to lower your front and rear end suspension on your Corvette C5. YOU NEED TO REPLACE THE BUSHINGS TO DO THIS JOB CORRECTLY. This set includes FOUR BRAND NEW POLYURETHANE BUSHINGS. The factory bushings on your C5 are close to 20-years old, DRY-ROTTED and NO LONGER SERVICEABLE. Do not buy any kit that does not include new bushings because you will end up having to source them elsewhere..
  • Compatible with Corvette C5 model vehicles 97 98 99 00 01 02 03 04 1997 1998 1999 2000 2001 2002 2003 2004 (does NOT fit F45, Selective Real-Time Dampening equipped Corvettes)..
Check Stock

Campbell 3002K 8\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 3800 lbs Load Capacity, 1\ Rope, 4-3/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Campbell 3001K 8\ Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 2800 lbs Load Capacity, 1\ Rope, 4-3/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock