Top Steering Wheel Puller Kit

EWK 53 Pcs Harmonic Balancer Puller Set Steering Wheel Puller Crankshaft Pulley & Gear Puller Flywheel Removal Tool

  • 【 Must Have 】EWK harmonic balancer puller set applies equal pressure to the hub, helping to remove harmonic balances, crankshaft pulleys, and steering wheels safely..
  • 【 Mutiple Use 】Includes 30 different bolts, a pressure screw, 3 adaptors, 18 washers, and a 4-slot yoke that allows you to use with flywheel, crankshaft, steering wheel, pulley and other two or three-hole applications..
  • 【 Completely Kit 】This puller kit includes the most needful SAE and metric bolts sizes (1/4""-28, 5/16""-18, 5/16""-24, 3/8""-16, 3/8""-24, M8x1.25, and M10x1.5) and washers sizes (ID 6mm, ID 8mm, ID 10mm, ID 12mm)..
  • 【 High Quality 】Crafted from heat treated carbon steel with oxide finishes ensures maximum strength, helping the tool withstand tough pulling jobs and resist rust..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

OTC 7929A Steering Wheel Puller Leg Kit

  • Particularly useful during steering wheel removal when there are no tapped holes in the assembly.
  • Designed for use with either the 7245 or 7403 OTC steering wheel puller.
  • These legs get behind the steering wheel assembly to provide an even straight pull.
  • The collar is designed for use on Ford and Chrysler vehicles.
Check Stock

OTC (7927A) Steering Wheel Remover/Lock Plate Compressor Set

  • With this set it's easy to remove the steering wheels of most domestic and imported vehicles with or without tilt steering columns.
  • Also accesses the turn signal switch and SIR modules on current GM vehicles.
  • Includes steering wheel lock plate remover steering pivot pin remover for Saginaw steering columns and steering wheel puller.
  • Plus four sets of cap screws all contained in convenient plastic blow-molded case.
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

OTC 7403 Steering Wheel, Flywheel, and Pulley Puller

  • OTC's Steering Wheel, Flywheel and Pulley Puller works for a variety of applications.
  • Great for pulling steering wheels on most late model cars including domestic cars with or without collapsible steering columns.
  • Also functions as a standard 2/3-way puller for removing pulleys and small engine flywheels.
  • Cap screws included (pairs): 3/8-16 x 3-1/2 inches.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Powerbuilt 647088 Steering Wheel Puller Set, Black

  • Design to pull steering wheels on most domestic and imported vehicles..
  • Heavy-duty drop-forged steel construction.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Grant 5891 Steering Wheel Puller

  • Puller for removing original steering wheel or previously installed Grant wheel from steering shaft.
  • Package Dimensions: 13.716 L x 5.334 H x 11.938 W (centimeters).
Check Stock

Shankly Steering Wheel Puller Kit (8 Piece), Professional-Grade, 1.5” to 3.35” Inch Spread, Ideal Combination for Harmonic Balancer Puller and Flywheel Puller

  • ✅ COMPLETE WHEEL PULLER SET: The steering wheel puller set from Shankly includes two thrust caps and a two-leg puller with two sets of legs. It has a maximum spread of 38/85MM, or 1.5"/3.35.
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

Orion Motor Tech Wheel Bearing Press Kit for Front Wheel Drive Bearing Removal & Installation 24pc Wheel Bearing Puller Tool Set with Sliding Screws Universal Bushings Sleeves Storage Case

  • WHEEL BEARING PULLER SET: This wheel bearing tool kit by Orion Motor Tech provides everything you need to let you quickly and easily remove and install your wheel bearings without hammering and front-end alignment.
  • UNIVERSAL COMPATIBILITY: Our versatile wheel bearing press kit offers multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, whether foreign or domestic.
  • QUICK & EASY OPERATION: Two 8.8 grade sliding screws with precision threading firmly hold your bearings and let you smoothly pop them out without damage, leaving the steering knuckle and strut assembly untouched.
  • DURABLE CONSTRUCTION: Made of premium stainless steel, this wheel bearing removal tool set provides strong and dependable long-lasting service.
  • the sliding screws are heat treated and blackened for superior strength and corrosion resistance.
  • COMPACT & PORTABLE: This 24 piece front wheel bearing press tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.
Check Stock