Top Stepper Motor Driver For 3d Printer

Easycargo 4pcs 40mm Heatsink 40mmx40mmx20mm Aluminum Heatsink Kit Cooling Heat Sink for 3D Printer Stepper Motor NEMA 17 TEC1-12706 Peltier Thermoelectric Cooler Module LED 40x40x20mm Silvertone

  • Includes 4 pieces 40mm aluminum heatsink..
  • Dimension: 1.57"x1.57"x0.79" / 40x40x20mm.
  • Can be applied for passive cooling 3D printer stepper motor, TEC1-12706 Thermoelectric module, NEMA17, LED etc.
  • 3D printer stepper motor, TEC1-12706 Peltier Thermoelectric Cooler Module Not Included..
Check Stock

DaFuRui 5Pcs A4988 Stepstick Stepper Motor Driver Module with Aluminum Heat Sink for 3D Printer Reprap CNC Machine or Robotics

  • ★A4988 is a complete microstepping motor driver with built-in translator for easy operation..
  • ★Five step resolutions:full-step,half-step,quarter-step,eighth-step,and sixteenth-step.Output drive capacity of up to 35V and±2A..
  • ★Micro-step operation, Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)..
  • ★Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection..
  • ★Applications: Stepper motors /3D printer/CNC/engraving machines/Supported 3d printers..
Check Stock

STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 9 Nm/1274.76oz.in Nema 34 Stepper Motor & 0-8.2A 24-80VDC Stepper Driver

  • High torque, long life, low temperature rise, low noise, well-package.
  • Motor specifications: 2 phase, Torque: 9 Nm(1274.76oz.in), Current: 6A.
  • Driver Specification: Power: +24-80VDC,  Output Current: 0-8.2A, Temperature: -20℃~+65℃.
  • Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock

STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 12.0 Nm/1699.68oz.in Nema 34 Stepper Motor & 0-8.2A 24-80VDC Stepper Driver

  • High torque, long life, low temperature rise, low noise, well-package.
  • Motor specifications: 2 phase, Torque: 12.0 Nm(1699.68oz.in), Current: 6A.
  • Driver Specification:Power: +24-80VDC,  Output Current: 0-8.2A, Temperature: -20℃~+65℃.
  • Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

Creality 3D Printer Original Stepper Motor 42-40/1pcs and 42-34/3pcs 2 Phase 0.8A 1.8 Degree 0.4N.M for Most FDM Printer CNC Accessory Replacement 4pcs/Pack

  • 【Widly Compatible】 42-34 Stepper motor apply for 3D printer Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro (like CR-10 Series Z axis or Ender-3 X/Y/Z....
  • 【Low noise motor】The Creality high quality motor with low power, uniform speed,stableperformance, low noise and no step to lose during the....
  • 【High quality stepper motor】Stepper motor with low noise and efficient heat dissipationhas the large torque and high precision without losing....
  • 【Precise rotation】With high-strength synchronous wheel andsynchronous gear, it realizes accurate constant ratio,uniform revolution and high....
  • 【What You Get】The package include 42-40 motor 1pcs and 42-34 motor 3pcs,this item does not include connecting cable.If need further please fell....
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise，it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

Stepper Motor HAT Drives Two Stepper Motors Up to 1/32 Microstepping for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B for Use 3D Printer etc @XYGStudy

  • This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Applications: 3D Printer, Sculpturing machine, Mechanical arm.
Check Stock